TIMETRA-VRTR-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Unsigned32, IpAddress, TimeTicks, Integer32, Gauge32, Counter32, Counter64 FROM SNMPv2-SMI MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF TEXTUAL-CONVENTION, DisplayString, RowStatus, TruthValue, MacAddress, TimeStamp, TimeInterval, TestAndIncr FROM SNMPv2-TC IANAipRouteProtocol FROM IANA-RTPROTO-MIB InetAutonomousSystemNumber, InetAddress, InetAddressType, InetAddressPrefixLength, InetAddressIPv6z, InetAddressIPv6, InetAddressIPv4 FROM INET-ADDRESS-MIB InterfaceIndex, InterfaceIndexOrZero FROM IF-MIB inetCidrRouteDestType, inetCidrRouteDest, inetCidrRoutePfxLen, inetCidrRoutePolicy, inetCidrRouteProto, inetCidrRouteNextHopType, inetCidrRouteNextHop, ipCidrRouteEntry, inetCidrRouteEntry FROM IP-FORWARD-MIB ipNetToMediaEntry, ipNetToPhysicalEntry FROM IP-MIB TmnxVRtrID, IpAddressPrefixLength, TmnxBgpAutonomousSystem, TmnxVRtrIDOrZero, TmnxAdminState, TmnxOperState, TmnxStatus, TmnxPortID, TmnxEncapVal, TNamedItem, TNamedItemOrEmpty, TItemDescription, TPIRRate, TCIRRate, TItemLongDescription, TmnxServId, TmnxCustId, TmnxTunnelType, TmnxTunnelID, TPolicyStatementNameOrEmpty, TmnxVPNRouteDistinguisher, TCpmProtPolicyID, TDSCPValue, TDSCPValueOrNone, TFCType, TmnxDHCP6MsgType, Dot1PPriority, TNetworkPolicyID, TmnxEnabledDisabled, TmnxPwGlobalIdOrZero, TFCNameOrEmpty, TPriority, TmnxReasContextVal, TPriorityOrUndefined, TQosQGrpInstanceIDorZero, TmnxMplsTpNodeID, TmnxMplsTpGlobalID, TmnxVpnIpBackupFamily FROM TIMETRA-TC-MIB timetraSRMIBModules, tmnxSRObjs, tmnxSRNotifyPrefix, tmnxSRConfs FROM TIMETRA-GLOBAL-MIB TDHCPFilterID, TIPFilterID, TFilterID FROM TIMETRA-FILTER-MIB tmnxChassisIndex, tmnxCardSlotNum, TmnxSlotNum FROM TIMETRA-CHASSIS-MIB tmnxPortNotifyPortId, tmnxPortType FROM TIMETRA-PORT-MIB svcDhcpLseStateNewCiAddr, svcDhcpLseStateNewChAddr, svcDhcpClientLease FROM TIMETRA-SERV-MIB sapPortId, sapEncapValue FROM TIMETRA-SAP-MIB ; timetraVRtrMIBModule MODULE-IDENTITY LAST-UPDATED "201102010000Z" ORGANIZATION "Alcatel-Lucent" CONTACT-INFO "Alcatel-Lucent SROS Support Web: http://support.alcatel-lucent.com " DESCRIPTION "This document is the SNMP MIB module to manage and provision the Alcatel-Lucent SROS device transport and virtual routers, their interfaces, and other related features. Copyright 2003-2013 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel-Lucent's proprietary intellectual property. Alcatel-Lucent retains all title and ownership in the Specification, including any revisions. Alcatel-Lucent grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel-Lucent products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel-Lucent makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification." -- -- Revision History -- REVISION "1102010000Z" DESCRIPTION "Rev 9.0 1 Feb 2011 00:00 9.0 release of the TIMETRA-VRTR-MIB." REVISION "0902280000Z" DESCRIPTION "Rev 7.0 28 Feb 2009 00:00 7.0 release of the TIMETRA-VRTR-MIB." REVISION "0807010000Z" DESCRIPTION "Rev 6.1 01 Jul 2008 00:00 6.1 release of the TIMETRA-VRTR-MIB." REVISION "0801010000Z" DESCRIPTION "Rev 6.0 01 Jan 2008 00:00 6.0 release of the TIMETRA-VRTR-MIB." REVISION "0701010000Z" DESCRIPTION "Rev 5.0 01 Jan 2007 00:00 5.0 release of the TIMETRA-VRTR-MIB." REVISION "0602280000Z" DESCRIPTION "Rev 4.0 28 Feb 2006 00:00 4.0 release of the TIMETRA-VRTR-MIB." REVISION "0508310000Z" DESCRIPTION "Rev 3.0 31 Aug 2005 00:00 3.0 release of the TIMETRA-VRTR-MIB." REVISION "0501240000Z" DESCRIPTION "Rev 2.1 24 Jan 2005 00:00 2.1 release of the TIMETRA-VRTR-MIB." REVISION "0401150000Z" DESCRIPTION "Rev 2.0 15 Jan 2004 00:00 2.0 release of the TIMETRA-VRTR-MIB." REVISION "0308150000Z" DESCRIPTION "Rev 1.2 15 Aug 2003 00:00 1.2 release of the TIMETRA-VRTR-MIB." REVISION "0301200000Z" DESCRIPTION "Rev 1.0 20 Jan 2003 00:00 1.0 Release of the TIMETRA-VRTR-MIB." REVISION "0008140000Z" DESCRIPTION "Rev 0.1 14 Aug 2000 00:00 Initial version of the TIMETRA-VRTR-MIB." ::= { timetraSRMIBModules 3 } tmnxVRtrObjs OBJECT IDENTIFIER ::= { tmnxSRObjs 3 } tmnxVRtrMobGatewayObjs OBJECT IDENTIFIER ::= { tmnxVRtrObjs 69 } tmnxVRtrConformance OBJECT IDENTIFIER ::= { tmnxSRConfs 3 } tmnxVRtrNotifyPrefix OBJECT IDENTIFIER ::= { tmnxSRNotifyPrefix 3} tmnxVRtrNotifications OBJECT IDENTIFIER ::= { tmnxVRtrNotifyPrefix 0 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-VRTR-MIB textual conventions -- TmnxVPNId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The purpose of a VPN-ID is to identify a VPN. The global VPN Identifier format is: 3-octet VPN Authority, organizationally unique ID followed by a 4-octet VPN index identifying the VPN according to OUI." REFERENCE "RFC 2685, Fox & Gleeson, 'Virtual Private Networks Identifier', September 1999." SYNTAX OCTET STRING (SIZE (0..7)) TmnxInetAddrState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxInetAddrState is the state of an ipv6 address." SYNTAX INTEGER { unknown (0), tentative (1), duplicated (2), inaccessible (3), deprecated (4), preferred (5) } TDSCPAppId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "DSCP Application identifiers for protocols that generate control traffic on the the Alcatel-Lucent SROS router." SYNTAX INTEGER { bgp (1), cflowd (2), dhcp (3), dns (4), ftp (5), icmp (6), igmp (7), l2tp (8), ldp (9), mld (10), msdp (11), ndis (12), ntp (13), ospf (14), pim (15), radius (16), rip (17), rsvp (18), snmp (19), snmp-notification (20), srrp (21), ssh (22), syslog (23), tacplus (24), telnet (25), tftp (26), traceroute (27), vrrp (28), ptp (29), igmp-reporter (30), gtp (31) } TDot1pAppId ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "IEEE 802.1p priority (Dot1p) Application identifiers for Layer-2 protocols that generate control traffic on the the Alcatel-Lucent SROS router." SYNTAX INTEGER { arp (1), isis (2), pppoe (3) } TmnxVrtrSingleSfmOverloadState ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxVrtrSingleSfmOverloadState data type is an enumerated integer that describes the values used to identify the IGP single-SFM-overload state (SFM:Switch-Fabric/Control Processor Module). notApplicable : the IGP overload reaction to the single-SFM condition is disabled; normal : the full system multicast capacity of a dual-SFM chassis is available; overload : only reduced system multicast capacity is available, and IGP protocols are in overload." SYNTAX INTEGER { notApplicable (0), normal (1), overload (2) } TmnxInetCidrNextHopType ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxInetCidrNextHopType is the type of next hop for a route. regular : Next hop is an IPv4 destination address for an IPv4 prefix or and IPv6 destination address for and IPv6 prefix. tunneled : Next hop refers to a LDP/RSVP/GRE tunnel for IPv4 prefix. sixOverMPLS : Next hop is a MPLS tunnel for IPv6 prefix. sixOverFour : Next hop is a IPv4 destination for IPv6 prefix." SYNTAX INTEGER { regular (1), tunneled (2), sixOverMPLS (3), sixOverFour (4) } TmnxInetCidrNextHopOwner ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxInetCidrNextHopOwner is the owner of the next hop for a route. unknown : Next hop owner is unknown. rsvp : Next hop owner is RSVP. ldp : Next hop owner is LDP. ldpOverRsvp : Next hop owner is LDP over RSVP." SYNTAX INTEGER { unknown (0), rsvp (1), ldp (2), ldpOverRsvp (3) } TmnxL3RouteOwner ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "The TmnxL3RouteOwner is the owner of the next hop for a Layer 3 route." SYNTAX INTEGER { unknown (0), local (1), host (2), static (5), bgp (16) } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- The ALcatel 7x50 SR series Virtual Router Group -- -- -- Virtual Router Table -- tmnxVRtrGlobalObjs OBJECT IDENTIFIER ::= { tmnxVRtrObjs 15 } vRtrNextVRtrID OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-create STATUS current DESCRIPTION "The vRtrNextVRtrID object is used to assign values to vRtrID to be used to create a new row in the vRtrConfTable as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrConfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions." ::= { tmnxVRtrGlobalObjs 1 } vRtrConfiguredVRtrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrConfiguredVRtrs indicates the current number of virtual routers configured in the system and represented as rows in the vRtrConfTable." ::= { tmnxVRtrGlobalObjs 2 } vRtrActiveVRtrs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrActiveVRtrs indicates the current number of virtual routers in the system with vRtrAdminState equal 'inService'." ::= { tmnxVRtrGlobalObjs 3 } vRtrRouteThresholdSoakTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "Following the generation of a tmnxVRtrHighRouteTCA notification, the value of vRtrRouteThresholdSoakTime indicates the soak interval in seconds before another tmnxVRtrHighRouteTCA notification will be re-issued. Imposing this soak period prevents continuous generation of notifications by the agent in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrHighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrMidRouteThreshold." DEFVAL { 600 } -- 10 minutes ::= { tmnxVRtrGlobalObjs 4 } vRtrMaxARPEntries OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrMaxARPEntries indicates the maximum number of active and inactive ARP entries supported across all virtual routers in the system." ::= { tmnxVRtrGlobalObjs 5 } vRtrIPv6RouteThresholdSoakTime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of object vRtrIPv6RouteThresholdSoakTime specifies the soak interval in seconds before another tmnxVRtrIPv6HighRouteTCA notification will be re-issued, after the generation of a tmnxVRtrIPv6HighRouteTCA notification. Imposing this soak period prevents continuous generation of notifications by the agent, in the event that routes are continually added to a VRF after it has reached its maximum capacity. When this object has a value of 0, it indicates that the agent should issue a single notification at the time that the value of vRtrIPv6HighRouteThreshold is exceeded and another notification should not be sent until the number of routes has fallen below the value configured in vRtrIPv6MidRouteThreshold." DEFVAL { 600 } -- 10 minutes ::= { tmnxVRtrGlobalObjs 6 } vRtrConfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrConfTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 1 } vRtrConfEntry OBJECT-TYPE SYNTAX VRtrConfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a virtual router in the system. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing vRtrRowStatus, vRtrName and vRtrType. Note that rows in this table are usually created by the agent itself as a side affect of some other configuration; for example, when a service vprn is created by setting the appropriate objects in the TIMETRA-SERV-MIB. There will always be at least two row entries in this table, one of these entries represents the base or transport router and the other represents the management router. These entries are created when the system is initialized and can never be deleted." INDEX { vRtrID } ::= { vRtrConfTable 1 } VRtrConfEntry ::= SEQUENCE { vRtrID TmnxVRtrID, vRtrRowStatus RowStatus, vRtrAdminState TmnxAdminState, vRtrName TNamedItemOrEmpty, vRtrMaxNumRoutes Integer32, vRtrBgpStatus TmnxStatus, vRtrMplsStatus TmnxStatus, vRtrOspfStatus TmnxStatus, vRtrRipStatus TmnxStatus, vRtrRsvpStatus TmnxStatus, vRtrEcmpMaxRoutes Unsigned32, vRtrAS TmnxBgpAutonomousSystem, vRtrNewIfIndex TestAndIncr, vRtrLdpStatus TmnxStatus, vRtrIsIsStatus TmnxStatus, vRtrRouterId IpAddress, vRtrTriggeredPolicy TruthValue, vRtrConfederationAS TmnxBgpAutonomousSystem, vRtrRouteDistinguisher TmnxVPNRouteDistinguisher, vRtrMidRouteThreshold Unsigned32, vRtrHighRouteThreshold Unsigned32, vRtrIllegalLabelThreshold Unsigned32, vRtrVpnId TmnxVPNId, vRtrDescription TItemDescription, vRtrGracefulRestart TruthValue, vRtrGracefulRestartType INTEGER, vRtrType INTEGER, vRtrServiceId TmnxServId, vRtrCustId TmnxCustId, vRtrIgmpStatus TmnxStatus, vRtrMaxNumRoutesLogOnly TruthValue, vRtrVrfTarget TNamedItemOrEmpty, vRtrVrfExportTarget TNamedItemOrEmpty, vRtrVrfImportTarget TNamedItemOrEmpty, vRtrPimStatus TmnxStatus, vRtrMaxMcastNumRoutes Integer32, vRtrMaxMcastNumRoutesLogOnly TruthValue, vRtrMcastMidRouteThreshold Unsigned32, vRtrIgnoreIcmpRedirect TruthValue, vRtrOspfv3Status TmnxStatus, vRtrMsdpStatus TmnxStatus, vRtrVprnType INTEGER, vRtrSecondaryVrfId TmnxVRtrIDOrZero, vRtrMldStatus TmnxStatus, vRtrIPv6MaxNumRoutes Integer32, vRtrIPv6MidRouteThreshold Unsigned32, vRtrIPv6HighRouteThreshold Unsigned32, vRtrIPv6MaxNumRoutesLogOnly TruthValue, vRtrIPv6IgnoreIcmpRedirect TruthValue, vRtrMcPathMgmtPlcyName TNamedItem, vRtrIgnoreNextHopMetric TruthValue, vRtrMvpnVrfTarget TNamedItemOrEmpty, vRtrMvpnVrfExportTarget TNamedItemOrEmpty, vRtrMvpnVrfImportTarget TNamedItemOrEmpty, vRtrMvpnVrfTargetUnicast TruthValue, vRtrMvpnVrfExportTargetUnicast TruthValue, vRtrMvpnVrfImportTargetUnicast TruthValue, vRtrAS4Byte InetAutonomousSystemNumber, vRtrConfederationAS4Byte InetAutonomousSystemNumber, vRtrMvpnCMcastImportRT TNamedItemOrEmpty, vRtrInterASMvpn TruthValue } vRtrID OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique value which identifies this virtual router in the Tmnx system. The vRtrID value for each virtual router must remain constant at least from one re-initialization of the system management processor (CPM) to the next. There will always be at least one router entry defined by the agent with vRtrID=1 which represents the transport router." ::= { vRtrConfEntry 1 } vRtrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status. The creation or deletion of a virtual router entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID value. Note that it is not allowed to 'destroy' the row entry for vRtrID = 1. In order for row creation to succeed, values for vRtrName and vRtrType must be included in the same SNMP SET PDU as vRtrRowStatus." ::= { vRtrConfEntry 2 } vRtrAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state for this virtual router. Note that it is not allowed to set vRtrAdminState to 'outOfService for the row entry with vRtrID = 1." DEFVAL { outOfService } ::= { vRtrConfEntry 3 } vRtrName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The administritive name for this virtual router. The router name must be unique among all virtual routers in the system. For row creation to succeed a value must be specified for vRtrName. When a row is created in the vRtrConfTable for a service vprn (i.e. when vRtrType is set to 'vprn'), the agent automatically assigns the name 'vprn'." ::= { vRtrConfEntry 4 } vRtrMaxNumRoutes OBJECT-TYPE SYNTAX Integer32 (-1..'7FFFFFFF'h) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of routes that can be configured on this virtual router. If the value is -1, then there is no limit." DEFVAL { -1 } ::= { vRtrConfEntry 5 } vRtrBgpStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for BGP on this virtual router. An attempt to set vRtrBgpStatus to 'delete' will fail if the BGP protocol is not in the administrative outOfService state." DEFVAL { delete } ::= { vRtrConfEntry 6 } vRtrMplsStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for MPLS on this virtual router. An attempt to set vRtrMplsStatus to 'delete' will fail if the MPLS protocol is not in the administrative outOfService state, i.e. TIMETRA-MPLS-MIB::vRtrMplsGeneralAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 7 } vRtrOspfStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The desired state for OSPFv2 on this virtual router. An attempt to set vRtrOspfStatus to 'delete' will fail if the OSPFv2 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0." DEFVAL { delete } ::= { vRtrConfEntry 8 } vRtrRipStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for RIP on this virtual router. An attempt to set vRtrRipStatus to 'delete' will fail if the RIP protocol is not in the admininistrative outOfService state." DEFVAL { delete } ::= { vRtrConfEntry 9 } vRtrRsvpStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for RSVP on this virtual router. An attempt to set vRtrRsvpStatus to 'delete' will fail if the RSVP protocol is not in the administrative outOfService state, i.e. TIMETRA-RSVP-MIB::vRtrRsvpGeneralAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 10 } vRtrEcmpMaxRoutes OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrEcmpMaxRoutes specifies the maximum number of equal cost routes allowed on this routing table instance. When the number ecmp routes available at the best preference value exceed the number of vRtrEcmpMaxRoutes allowed, then the lowest next-hop IP address algorithm is used to select the ecmp routes used. When vRtrEcmpMaxRoutes is set to zero (0), and multiple routes are available with the same best preference value and equal cost values, then the route with the lowest next-hop IP address is used." DEFVAL { 1 } ::= { vRtrConfEntry 11 } vRtrAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrAS specifies the autonomous system number to be advertised to this peer. This object is MUST be set before BGP can be activated. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by vRtrAS4Byte." REFERENCE "" DEFVAL { 0 } ::= { vRtrConfEntry 12 } vRtrNewIfIndex OBJECT-TYPE SYNTAX TestAndIncr MAX-ACCESS read-create STATUS current DESCRIPTION "This object is used to assign values to vRtrIfIndex as described in 'Textual Conventions for SNMPv2'. The network manager reads the object, and then writes the value back in the SET request that creates a new instance of vRtrIfEntry. If the SET fails with the code 'inconsistentValue', then the process must be repeated. If the the SET succeeds, then the object is incremented and the new instance is created according to the manager's directions." ::= { vRtrConfEntry 13 } vRtrLdpStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for LDP on this virtual router. An attempt to set vRtrLdpStatus to 'delete' will fail if the LDP protocol is not in the administrative outOfService state, i.e. TIMETRA-LDP-MIB::vRtrLdpGenAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 14 } vRtrIsIsStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The desired state for ISIS on this virtual router. An attempt to set vRtrIsIsStatus to 'delete' will fail if the ISIS protocol is not in the administrative outOfService state." DEFVAL { delete } ::= { vRtrConfEntry 15 } vRtrRouterId OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "A 32-bit integer uniquely identifying the router in the Autonomous System. By convention, to ensure uniqueness, this should default to the value of one of the router's IP interface addresses." ::= { vRtrConfEntry 16 } vRtrTriggeredPolicy OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrTriggeredPolicy is 'false', all routing protocols automatically reevaluate their routes when the route policies are changed. If this value is 'true', then the user must trigger the recalculation of routes when the route policies are changed." DEFVAL { false } ::= { vRtrConfEntry 17 } vRtrConfederationAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrConfederationAS specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by vRtrConfederationAS4Byte." DEFVAL { 0 } ::= { vRtrConfEntry 18 } vRtrRouteDistinguisher OBJECT-TYPE SYNTAX TmnxVPNRouteDistinguisher MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRouteDistinguisher is an identifier attached to routes that distinguishes to which VPN it belongs. The VPRN cannot be operationally 'inService' until a route distinguisher has been assigned." DEFVAL { '0000000000000000'H } ::= { vRtrConfEntry 19 } vRtrMidRouteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMidRouteThreshold specifies the mid-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." DEFVAL { 0 } ::= { vRtrConfEntry 20 } vRtrHighRouteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrHighRouteThreshold specifies the high-level water marker for the number of routes which this VRF may hold. When this limit is exceeded a tmnxVRtrHighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." ::= { vRtrConfEntry 21 } vRtrIllegalLabelThreshold OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIllegalLabelThreshold specifies the allowed limit for illegal label violations on this VRF. When this limit is exceeded a tmnxVRtrIllegalLabelTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." DEFVAL { 0 } ::= { vRtrConfEntry 22 } vRtrVpnId OBJECT-TYPE SYNTAX TmnxVPNId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVpnId is the Virtual Private Network Identifier of this virtual router." DEFVAL { ''H } -- the empty string ::= { vRtrConfEntry 23 } vRtrDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDescription is a user provided description string for this virtual router. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } -- the empty string ::= { vRtrConfEntry 25 } vRtrGracefulRestart OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGracefulRestart indicates whether or not graceful restart capabilities are enabled on this virtual router. In order for any protocol to perform graceful restart vRtrGracefulRestart must have a value of 'true'. Graceful restart capabilities can then be enabled or disabled on an individual protocol basis." DEFVAL { false } ::= { vRtrConfEntry 26 } vRtrGracefulRestartType OBJECT-TYPE SYNTAX INTEGER { never (0), manual (1), automatic (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGracefulRestartType specifies when to include grace restart of routing protocols as a result of a switchover from primary CPM in a redundant system. 'never' - always switch without graceful restart 'manual' - perform graceful restart only on a forced switchover 'automatic' - perform graceful restart on either a switchover caused by an error or a forced switchover" DEFVAL { never } ::= { vRtrConfEntry 27 } vRtrType OBJECT-TYPE SYNTAX INTEGER { unknown (0), baseRouter (1), vprn (2), vr (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrType specifies the type of virtual router represented by this row entry. When a row is created in this table using 'createAndGo', vRtrType must be specified or the row creation will fail. Only the value of 'vr (3)' can be set with a SNMP SET request. The other values are used for row entries created internally by the agent. The value of vRtrType cannot be modified if vRtrRowStatus has a value of 'active'." ::= { vRtrConfEntry 28 } vRtrServiceId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-only STATUS current DESCRIPTION "When vRtrType has a value of 'vprn', the value of vRtrServiceId indicates the service-id of the associated service that created this row entry." ::= { vRtrConfEntry 29 } vRtrCustId OBJECT-TYPE SYNTAX TmnxCustId MAX-ACCESS read-only STATUS current DESCRIPTION "When vRtrType has a value of 'vprn', the value of vRtrCustId indicates the customer-id of the associated service that created this row entry." ::= { vRtrConfEntry 30 } vRtrIgmpStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for IGMP on this virtual router. An attempt to set vRtrIgmpStatus to 'delete' will fail if the IGMP protocol is not in the administrative outOfService state, i.e. TIMETRA-IGMP-MIB::vRtrIgmpGenAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 31 } vRtrMaxNumRoutesLogOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMaxNumRoutesLogOnly specifies the action to be taken when the maximum number of routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled." DEFVAL { false } ::= { vRtrConfEntry 32 } vRtrVrfTarget OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfTarget specifies the extended community name for the default vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrVrfExportTarget or vRtrVrfImportTarget has been set." ::= { vRtrConfEntry 33 } vRtrVrfExportTarget OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportTarget specifies the extended community name for the default vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set." ::= { vRtrConfEntry 34 } vRtrVrfImportTarget OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportTarget specifies the extended community name for the default vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrVrfTarget has been set." ::= { vRtrConfEntry 35 } vRtrPimStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for PIM on this virtual router. When the object is set to 'create', PIM protocol instance is enabled on the virtual router. Setting the value to 'delete' disables PIM on the virtual router." DEFVAL { delete } ::= { vRtrConfEntry 36 } vRtrMaxMcastNumRoutes OBJECT-TYPE SYNTAX Integer32 (-1..'7FFFFFFF'h) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of multicast routes that can be configured on this virtual router. If the value is -1, then there is no limit." DEFVAL { -1 } ::= { vRtrConfEntry 37 } vRtrMaxMcastNumRoutesLogOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMaxMcastNumRoutesLogOnly specifies the action to be taken when the maximum number of multicast routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new multicast routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled." DEFVAL { false } ::= { vRtrConfEntry 38 } vRtrMcastMidRouteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMcastMidRouteThreshold specifies the mid-level water marker for the number of multicast routes which this VRF may hold. When this limit is exceeded a tmnxVRtrMcastMidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." DEFVAL { 0 } ::= { vRtrConfEntry 39 } vRtrIgnoreIcmpRedirect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrIgnoreIcmpRedirect is 'true', the virtual router will drop all ICMP Redirects received on the management interface. If the value of vRtrIgnoreIcmpRedirect is 'false' and an ICMP Redirect is received on the management interface, a /32 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIgnoreIcmpRedirect will fail with an 'inconsistentValue' error." DEFVAL { true } ::= { vRtrConfEntry 40 } vRtrOspfv3Status OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The desired state for OSPFv3 on this virtual router. An attempt to set vRtrOspfv3Status to 'delete' will fail if the OSPFv3 protocol is not in the administrative outOfService state, i.e. TIMETRA-OSPF-NG-MIB::tmnxOspfAdminState must be set to 'disabled'. This object was obsoleted in release 5.0." DEFVAL { delete } ::= { vRtrConfEntry 41 } vRtrMsdpStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for Msdp on this virtual router. An attempt to set vRtrMsdpStatus to 'delete' will fail if the Msdp protocol is not in the administrative outOfService state, i.e. TIMETRA-MSDP-MIB::tmnxMsdpAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 42 } vRtrVprnType OBJECT-TYPE SYNTAX INTEGER { regular (1), hub (2), spoke (3), subscriberSplitHorizon (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVprnType specifies how traffic is routed. regular (1) - All traffic is routed to all destinations. hub (2) - Network traffic is routed only to the access side. Access traffic is routed to all destinations. spoke (3) - Networks traffic is routed to all destinations. Access traffic is routed only to the network side. subscriberSplitHorizon (4) - Subscriber-interface traffic is routed only to the network side. All other traffic is routed to all destinations. This object cannot be modified if vRtrType is not 'vprn'." DEFVAL { regular } ::= { vRtrConfEntry 43 } vRtrSecondaryVrfId OBJECT-TYPE SYNTAX TmnxVRtrIDOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The unique value of vRtrSecondaryVrfId specifies the secondary vrf-id for hub and spoke vprn. Non-zero value of vRtrSecondaryVrfId indicates that two route-tables exist for hub and spoke vprn system one each for hub and spoke. One of which is indexed by vRtrSecondaryVrfId. If the value of vRtrSecondaryVrfId is zero, it indicates that there is only one route-table for hub and spoke vprn system." ::= { vRtrConfEntry 44 } vRtrMldStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The desired state for Multicast Listener Discovery (MLD) Protocol on this virtual router. An attempt to set vRtrMldStatus to 'delete' will fail if the MLD protocol is not in the administrative outOfService state, i.e. TIMETRA-MLD-MIB::vRtrMldGenAdminState must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrConfEntry 45 } vRtrIPv6MaxNumRoutes OBJECT-TYPE SYNTAX Integer32 (-1..'7FFFFFFF'h) MAX-ACCESS read-create STATUS current DESCRIPTION "The maximum number of IPv6 routes that can be configured on this virtual router. If the value is -1, then there is no limit. This object is not supported on SR-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5'." DEFVAL { -1 } ::= { vRtrConfEntry 46 } vRtrIPv6MidRouteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIPv6MidRouteThreshold specifies the mid-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6MidRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." DEFVAL { 0 } ::= { vRtrConfEntry 47 } vRtrIPv6HighRouteThreshold OBJECT-TYPE SYNTAX Unsigned32 (0..100) UNITS "percent" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIPv6HighRouteThreshold specifies the high-level water marker for the number of IPv6 routes which this VRF may hold. When this limit is exceeded a tmnxVRtrIPv6HighRouteTCA notification is generated. A value of 0 (zero) for this object indicates that the threshold is infinite, and the notification will never be sent." ::= { vRtrConfEntry 48 } vRtrIPv6MaxNumRoutesLogOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIPv6MaxNumRoutesLogOnly specifies the action to be taken when the maximum number of IPv6 routes that can be held within a given VRF context is reached. If the value is 'true' the event is logged (a trap is sent) and the learning of new routes is not disabled. If the value is 'false' the event is logged and the learning of new routes is disabled." DEFVAL { false } ::= { vRtrConfEntry 49 } vRtrIPv6IgnoreIcmpRedirect OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrIPv6IgnoreIcmpRedirect is 'true', the virtual router will drop all IPv6 ICMP Redirects received on the management interface. If the value of vRtrIPv6IgnoreIcmpRedirect is 'false' and an IPv6 ICMP Redirect is received on the management interface, a /128 route will be created in the route table. If the value of vRtrName is not 'management', an SNMP set request to vRtrIPv6IgnoreIcmpRedirect will fail with an 'inconsistentValue' error." DEFVAL { true } ::= { vRtrConfEntry 50 } vRtrMcPathMgmtPlcyName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMcPathMgmtPlcyName specifies the multicast policy name configured on this virtual router." DEFVAL { "default" } ::= { vRtrConfEntry 51 } vRtrIgnoreNextHopMetric OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIgnoreNextHopMetric specifies whether next-hop metric should be ignored when computing ECMP paths for VPRN routes." DEFVAL { false } ::= { vRtrConfEntry 52 } vRtrMvpnVrfTarget OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-import or vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if either vRtrMvpnVrfExportTarget or vRtrMvpnVrfImportTarget has been set." DEFVAL { ''H } ::= { vRtrConfEntry 53 } vRtrMvpnVrfExportTarget OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-export policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrMvpnVrfTarget has been set." DEFVAL { ''H } ::= { vRtrConfEntry 54 } vRtrMvpnVrfImportTarget OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportTarget specifies the extended community name for the Multicast VPN (MVPN) vrf-import policy to use for the vRtrID if no entries are configured in the vRtrPolicyTable for this vRtrID instance. This object can not be set if vRtrMvpnVrfTarget has been set." DEFVAL { ''H } ::= { vRtrConfEntry 55 } vRtrMvpnVrfTargetUnicast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfTargetUnicast specifies whether unicast vrf-target extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfTarget extended community is used for MVPN." DEFVAL { false } ::= { vRtrConfEntry 56 } vRtrMvpnVrfExportTargetUnicast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportTargetUnicast specifies whether unicast vrf-target import extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfExportTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfExportTarget extended community is used for MVPN." DEFVAL { false } ::= { vRtrConfEntry 57 } vRtrMvpnVrfImportTargetUnicast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportTargetUnicast specifies whether unicast vrf-target export extended community is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrVrfImportTarget extended community is used for MVPN. If the value is 'false', vRtrMvpnVrfImportTarget extended community is used for MVPN." DEFVAL { false } ::= { vRtrConfEntry 58 } vRtrAS4Byte OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrAS4Byte specifies the autonomous system number to be advertised to this peer. This object MUST be set before BGP can be activated." DEFVAL { 0 } ::= { vRtrConfEntry 59 } vRtrConfederationAS4Byte OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrConfederationAS4Byte specifies the confederation AS number for the virtual router. A value of 0 means no confederation AS." DEFVAL { 0 } ::= { vRtrConfEntry 60 } vRtrMvpnCMcastImportRT OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMvpnCMcastImportRT indicates C-multicast Import Route that uniquely identifies a VRF. vRtrMvpnCMcastImportRT controls imports of C-multicast routes into a particular VRF. A PE that has sites of a given MVPN connected to it needs to communicate the value of the C-multicast Import RT associated with the VRF of that MVPN on the PE to all other PEs that have sites of that MVPN. A PE that originates a (unicast) route to VPN-IP addresses must include in the BGP Update message the value of the C-multicast Import RT of the VRF associated with the route." DEFVAL { ''H } ::= { vRtrConfEntry 61 } vRtrInterASMvpn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "When the object vRtrType has a value of 'vprn', the value of vRtrInterASMvpn indicates whether the VPRN service is used for inter-AS MVPN or not. If the value of the object is 'true', it indicates that the vprn service is used for inter-AS MVPN only. If the value of the object is 'false', it indicates that the vprn service is not used for inter-AS MVPN." ::= { vRtrConfEntry 64 } -- -- Alcatel-Lucent SROS series Virtual Router Policy Table -- -- Augmentation of the vRtrConfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, vRtrConfTable, and the augmenting table, vRtrPolicyTable. -- This in effect extends the vRtrConfTable with additional columns. -- Creation (or deletion) of a row in the vRtrConfTable results in the same -- fate for the row in the vRtrPolicyTable. -- vRtrPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrPolicyTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 16 } vRtrPolicyEntry OBJECT-TYPE SYNTAX VRtrPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrConfEntry } ::= { vRtrPolicyTable 1 } VRtrPolicyEntry ::= SEQUENCE { vRtrImportPolicy1 TPolicyStatementNameOrEmpty, vRtrImportPolicy2 TPolicyStatementNameOrEmpty, vRtrImportPolicy3 TPolicyStatementNameOrEmpty, vRtrImportPolicy4 TPolicyStatementNameOrEmpty, vRtrImportPolicy5 TPolicyStatementNameOrEmpty, vRtrExportPolicy1 TPolicyStatementNameOrEmpty, vRtrExportPolicy2 TPolicyStatementNameOrEmpty, vRtrExportPolicy3 TPolicyStatementNameOrEmpty, vRtrExportPolicy4 TPolicyStatementNameOrEmpty, vRtrExportPolicy5 TPolicyStatementNameOrEmpty, vRtrMvpnImportPolicy1 TPolicyStatementNameOrEmpty, vRtrMvpnImportPolicy2 TPolicyStatementNameOrEmpty, vRtrMvpnImportPolicy3 TPolicyStatementNameOrEmpty, vRtrMvpnImportPolicy4 TPolicyStatementNameOrEmpty, vRtrMvpnImportPolicy5 TPolicyStatementNameOrEmpty, vRtrMvpnExportPolicy1 TPolicyStatementNameOrEmpty, vRtrMvpnExportPolicy2 TPolicyStatementNameOrEmpty, vRtrMvpnExportPolicy3 TPolicyStatementNameOrEmpty, vRtrMvpnExportPolicy4 TPolicyStatementNameOrEmpty, vRtrMvpnExportPolicy5 TPolicyStatementNameOrEmpty, vRtrMvpnImportPolicyUnicast TruthValue, vRtrMvpnExportPolicyUnicast TruthValue, vRtrGrtMaxExportRoutes Unsigned32, vRtrGrtExportPolicy1 TPolicyStatementNameOrEmpty, vRtrGrtExportPolicy2 TPolicyStatementNameOrEmpty, vRtrGrtExportPolicy3 TPolicyStatementNameOrEmpty, vRtrGrtExportPolicy4 TPolicyStatementNameOrEmpty, vRtrGrtExportPolicy5 TPolicyStatementNameOrEmpty, vRtrGrtMaxIpv6ExportRoutes Unsigned32 } vRtrImportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrImportPolicy1 is the name of the first policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy1." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 1 } vRtrImportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrImportPolicy2 is the name of the second policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy2." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 2 } vRtrImportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrImportPolicy3 is the name of the third policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy3." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 3 } vRtrImportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrImportPolicy4 is the name of the fourth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy4." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 4 } vRtrImportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrImportPolicy5 is the name of the fifth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrImportPolicy1 through vRtrImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfImportPolicy5." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 5 } vRtrExportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrExportPolicy1 is the name of the first policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy1." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 6 } vRtrExportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrExportPolicy2 is the name of the second policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy2." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 7 } vRtrExportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrExportPolicy3 is the name of the third policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy3." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 8 } vRtrExportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrExportPolicy4 is the name of the fourth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy4." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 9 } vRtrExportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrExportPolicy4 is the name of the fifth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrExportPolicy1 through vRtrExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrVrfExportPolicy5." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 10 } vRtrMvpnImportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMvpnImportPolicy1 is the name of the first policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy1." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 11 } vRtrMvpnImportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMvpnImportPolicy2 is the name of the second policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy2." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 12 } vRtrMvpnImportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMvpnImportPolicy3 is the name of the third policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy3." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 13 } vRtrMvpnImportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMvpnImportPolicy4 is the name of the fourth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy4." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 14 } vRtrMvpnImportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMvpnImportPolicy5 is the name of the fifth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfImportPolicy5." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 15 } vRtrMvpnExportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMvpnExportPolicy1 is the name of the first policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy1." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 16 } vRtrMvpnExportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMvpnExportPolicy2 is the name of the second policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy2." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 17 } vRtrMvpnExportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMvpnExportPolicy3 is the name of the third policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy3." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 18 } vRtrMvpnExportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMvpnExportPolicy4 is the name of the fourth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy4." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 19 } vRtrMvpnExportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrMvpnExportPolicy5 is the name of the fifth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU. This object was obsoleted in release 10.0. It is replaced by object vRtrMvpnVrfExportPolicy5." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 20 } vRtrMvpnImportPolicyUnicast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnImportPolicyUnicast specifies whether unicast vrf-import policy is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrImportPolicy1 through vRtrImportPolicy5 are used for MVPN. If the value is 'false', vRtrMvpnImportPolicy1 through vRtrMvpnImportPolicy5 are used for MVPN." DEFVAL { false } ::= { vRtrPolicyEntry 21 } vRtrMvpnExportPolicyUnicast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnExportPolicyUnicast specifies whether unicast vrf-export policy is used for the Multicast VPN (MVPN) as well. If the value is 'true', vRtrExportPolicy1 through vRtrExportPolicy5 is used for MVPN. If the value is 'false', vRtrMvpnExportPolicy1 through vRtrMvpnExportPolicy5 is used for MVPN." DEFVAL { false } ::= { vRtrPolicyEntry 22 } vRtrGrtMaxExportRoutes OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGrtMaxExportRoutes specifies the maximum number of routes that can be exported from the VRF to the GRT." DEFVAL { 5 } ::= { vRtrPolicyEntry 23 } vRtrGrtExportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGrtExportPolicy1 specifies the name of the first policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 24 } vRtrGrtExportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGrtExportPolicy2 specifies the name of the second policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 25 } vRtrGrtExportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGrtExportPolicy3 specifies the name of the third policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 26 } vRtrGrtExportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGrtExportPolicy4 specifies the name of the fourth policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 27 } vRtrGrtExportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGrtExportPolicy5 specifies the name of the fifth policy to be used for determining which routes are exported from the VRF to the GRT. These entries will be marked as BGP-VPN routes in the GRT. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrGrtExportPolicy1 through vRtrGrtExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrPolicyEntry 28 } vRtrGrtMaxIpv6ExportRoutes OBJECT-TYPE SYNTAX Unsigned32 (0..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGrtMaxIpv6ExportRoutes specifies the maximum number of IPv6 routes that can be exported from the VRF to the GRT. When the value of this object is set to '0', there is no limit on the number of routes exported from the VRF to the GRT." DEFVAL { 5 } ::= { vRtrPolicyEntry 29 } -- -- Alcatel-Lucent SROS series Virtual Router Statistics Table -- -- Augmentation of the vRtrConfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, vRtrConfTable, and the augmenting table, vRtrStatTable. -- This in effect extends the vRtrConfTable with additional columns. -- Creation (or deletion) of a row in the vRtrConfTable results in the same -- fate for the row in the vRtrStatTable. -- vRtrStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrStatTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 2 } vRtrStatEntry OBJECT-TYPE SYNTAX VRtrStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrConfEntry } ::= { vRtrStatTable 1 } VRtrStatEntry ::= SEQUENCE { vRtrOperState TmnxOperState, vRtrDirectRoutes Gauge32, vRtrDirectActiveRoutes Gauge32, vRtrStaticRoutes Gauge32, vRtrStaticActiveRoutes Gauge32, vRtrOSPFRoutes Gauge32, vRtrOSPFActiveRoutes Gauge32, vRtrBGPRoutes Gauge32, vRtrBGPActiveRoutes Gauge32, vRtrISISRoutes Gauge32, vRtrISISActiveRoutes Gauge32, vRtrRIPRoutes Gauge32, vRtrRIPActiveRoutes Gauge32, vRtrAggregateRoutes Gauge32, vRtrAggregateActiveRoutes Gauge32, vRtrStatConfiguredIfs Gauge32, vRtrStatActiveIfs Gauge32, vRtrStatIllegalLabels Counter32, vRtrStatCurrNumRoutes Gauge32, vRtrStatBGPVpnRoutes Gauge32, vRtrStatBGPVpnActiveRoutes Gauge32, vRtrStatTotalLdpTunnels Gauge32, vRtrStatTotalSdpTunnels Gauge32, vRtrStatActiveLdpTunnels Gauge32, vRtrStatActiveSdpTunnels Gauge32, vRtrMulticastRoutes Gauge32, vRtrStatActiveARPEntries Gauge32, vRtrStatTotalARPEntries Gauge32, vRtrV6DirectRoutes Gauge32, vRtrV6DirectActiveRoutes Gauge32, vRtrV6StaticRoutes Gauge32, vRtrV6StaticActiveRoutes Gauge32, vRtrV6OSPFRoutes Gauge32, vRtrV6OSPFActiveRoutes Gauge32, vRtrV6BGPRoutes Gauge32, vRtrV6BGPActiveRoutes Gauge32, vRtrV6ISISRoutes Gauge32, vRtrV6ISISActiveRoutes Gauge32, vRtrV6RIPRoutes Gauge32, vRtrV6RIPActiveRoutes Gauge32, vRtrV6AggregateRoutes Gauge32, vRtrV6AggregateActiveRoutes Gauge32, vRtrV6StatConfiguredIfs Gauge32, vRtrV6StatActiveIfs Gauge32, vRtrV6StatIllegalLabels Counter32, vRtrV6StatCurrNumRoutes Gauge32, vRtrV6StatBGPVpnRoutes Gauge32, vRtrV6StatBGPVpnActiveRoutes Gauge32, vRtrV6StatTotalLdpTunnels Gauge32, vRtrV6StatTotalSdpTunnels Gauge32, vRtrV6StatActiveLdpTunnels Gauge32, vRtrV6StatActiveSdpTunnels Gauge32, vRtrV6MulticastRoutes Gauge32, vRtrV6StatActiveNbrEntries Gauge32, vRtrV6StatTotalNbrEntries Gauge32, vRtrSubMgmtRoutes Gauge32, vRtrSubMgmtActiveRoutes Gauge32, vRtrStatTotalRsvpTunnels Gauge32, vRtrStatActiveRsvpTunnels Gauge32, vRtrV6StatTotalRsvpTunnels Gauge32, vRtrV6StatActiveRsvpTunnels Gauge32, vRtrHostRoutes Gauge32, vRtrHostActiveRoutes Gauge32, vRtrV6HostRoutes Gauge32, vRtrV6HostActiveRoutes Gauge32, vRtrStatLocalARPEntries Gauge32, vRtrStatStaticARPEntries Gauge32, vRtrStatDynamicARPEntries Gauge32, vRtrStatManagedARPEntries Gauge32, vRtrStatInternalARPEntries Gauge32, vRtrManagedRoutes Gauge32, vRtrManagedActiveRoutes Gauge32, vRtrLDPRoutes Gauge32, vRtrLDPActiveRoutes Gauge32, vRtrVPNLeakRoutes Gauge32, vRtrVPNLeakActiveRoutes Gauge32, vRtrV6VPNLeakRoutes Gauge32, vRtrV6VPNLeakActiveRoutes Gauge32, vRtrV6SubMgmtRoutes Gauge32, vRtrV6SubMgmtActiveRoutes Gauge32, vRtrMobileHostRoutes Gauge32, vRtrMobileHostActiveRoutes Gauge32, vRtrV6MobileHostRoutes Gauge32, vRtrV6MobileHostActiveRoutes Gauge32, vRtrStatTotalBgpTunnels Gauge32, vRtrStatActiveBgpTunnels Gauge32, vRtrNatRoutes Gauge32, vRtrNatActiveRoutes Gauge32, vRtrV6NatRoutes Gauge32, vRtrV6NatActiveRoutes Gauge32, vRtrPeriodicRoutes Gauge32, vRtrPeriodicActiveRoutes Gauge32, vRtrV6PeriodicRoutes Gauge32, vRtrV6PeriodicActiveRoutes Gauge32, vRtrStatTotalMplsTpTunnels Gauge32, vRtrStatActiveMplsTpTunnels Gauge32 } vRtrOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrOperState indicates current operational status of this virtual router." ::= { vRtrStatEntry 1 } vRtrDirectRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrDirectRoutes indicates the current number of direct routes for this instance of the route table." ::= { vRtrStatEntry 2 } vRtrDirectActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrDirectActiveRoutes indicates the current number of active direct routes for this instance of the route table." ::= { vRtrStatEntry 3 } vRtrStaticRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStaticRoutes indicates the current number of static routes for this instance of the route table." ::= { vRtrStatEntry 4 } vRtrStaticActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStaticActiveRoutes indicates the current number of active static routes for this instance of the route table." ::= { vRtrStatEntry 5 } vRtrOSPFRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrOSPFRoutes indicates the current number of ospf routes for this instance of the route table." ::= { vRtrStatEntry 6 } vRtrOSPFActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrOSPFActiveRoutes indicates the current number of active ospf routes for this instance of the route table." ::= { vRtrStatEntry 7 } vRtrBGPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrBGPRoutes indicates the current number of bgp routes for this instance of the route table." ::= { vRtrStatEntry 8 } vRtrBGPActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrBGPActiveRoutes indicates the current number of active bgp routes for this instance of the route table." ::= { vRtrStatEntry 9 } vRtrISISRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrISISRoutes indicates the current number of isis routes for this instance of the route table." ::= { vRtrStatEntry 10 } vRtrISISActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrISISActiveRoutes indicates the current number of active isis routes for this instance of the route table." ::= { vRtrStatEntry 11 } vRtrRIPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrRIPRoutes indicates the current number of rip routes for this instance of the route table." ::= { vRtrStatEntry 12 } vRtrRIPActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrRIPActiveRoutes indicates the current number of active rip routes for this instance of the route table." ::= { vRtrStatEntry 13 } vRtrAggregateRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrAggregateRoutes indicates the current number of aggregate routes for this instance of the route table." ::= { vRtrStatEntry 14 } vRtrAggregateActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrAggregateActiveRoutes indicates the current number of active aggregate routes for this instance of the route table." ::= { vRtrStatEntry 15 } vRtrStatConfiguredIfs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatConfiguredIfs indicates the current number of router interfaces configured on this virtual router." ::= { vRtrStatEntry 16 } vRtrStatActiveIfs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatActiveIfs indicates the current number of router interfaces with vRtrIfAdminState equal 'inService' on this virtual router." ::= { vRtrStatEntry 17 } vRtrStatIllegalLabels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatIllegalLabels indicates the number of illegally received labels on this virtual router." ::= { vRtrStatEntry 18 } vRtrStatCurrNumRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatCurrNumRoutes indicates the current number of routes in the VRF for this virtual router." ::= { vRtrStatEntry 19 } vRtrStatBGPVpnRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatBGPVpnRoutes indicates the current number of VPN-IPV4 routes learned by MP-BGP for this virtual router." ::= { vRtrStatEntry 20 } vRtrStatBGPVpnActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatBGPVpnActiveRoutes indicates the current number of active VPN-IPV4 routes learned by MP-BGP for this virtual router." ::= { vRtrStatEntry 21 } vRtrStatTotalLdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatTotalLdpTunnels indicates the current number of both active and inactive LDP tunnels." ::= { vRtrStatEntry 22 } vRtrStatTotalSdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatTotalSdpTunnels indicates the current number of both active and inactive SDP tunnels." ::= { vRtrStatEntry 23 } vRtrStatActiveLdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatActiveLdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'." ::= { vRtrStatEntry 24 } vRtrStatActiveSdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatActiveSdpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'." ::= { vRtrStatEntry 25 } vRtrMulticastRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrMulticastRoutes indicates the current number of rows in the vRtrPimNgGrpSrcTable." ::= { vRtrStatEntry 26 } vRtrStatActiveARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatActiveARPEntries indicates the number of active ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 27 } vRtrStatTotalARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatTotalARPEntries indicates the total number of active and inactive ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 28 } vRtrV6DirectRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6DirectRoutes indicates the current number of v6 direct routes for this instance of the route table." ::= { vRtrStatEntry 29 } vRtrV6DirectActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6DirectActiveRoutes indicates the current number of v6 active direct routes for this instance of the route table." ::= { vRtrStatEntry 30 } vRtrV6StaticRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StaticRoutes indicates the current number of v6 static routes for this instance of the route table." ::= { vRtrStatEntry 31 } vRtrV6StaticActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StaticActiveRoutes indicates the current number of v6 active static routes for this instance of the route table." ::= { vRtrStatEntry 32 } vRtrV6OSPFRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6OSPFRoutes indicates the current number of v6 ospf routes for this instance of the route table." ::= { vRtrStatEntry 33 } vRtrV6OSPFActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6OSPFActiveRoutes indicates the current number of v6 active ospf routes for this instance of the route table." ::= { vRtrStatEntry 34 } vRtrV6BGPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6BGPRoutes indicates the current number of v6 bgp routes for this instance of the route table." ::= { vRtrStatEntry 35 } vRtrV6BGPActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6BGPActiveRoutes indicates the current number of v6 active bgp routes for this instance of the route table." ::= { vRtrStatEntry 36 } vRtrV6ISISRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6ISISRoutes indicates the current number of v6 isis routes for this instance of the route table." ::= { vRtrStatEntry 37 } vRtrV6ISISActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6ISISActiveRoutes indicates the current number of v6 active isis routes for this instance of the route table." ::= { vRtrStatEntry 38 } vRtrV6RIPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6RIPRoutes indicates the current number of v6 rip routes for this instance of the route table." ::= { vRtrStatEntry 39 } vRtrV6RIPActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6RIPActiveRoutes indicates the current number of active v6 rip routes for this instance of the route table." ::= { vRtrStatEntry 40 } vRtrV6AggregateRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6AggregateRoutes indicates the current number of v6 aggregate routes for this instance of the route table." ::= { vRtrStatEntry 41 } vRtrV6AggregateActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6AggregateActiveRoutes indicates the current number of active v6 aggregate routes for this instance of the route table." ::= { vRtrStatEntry 42 } vRtrV6StatConfiguredIfs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatConfiguredIfs indicates the current number of v6 router interfaces configured on this virtual router." ::= { vRtrStatEntry 43 } vRtrV6StatActiveIfs OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatActiveIfs indicates the current number of v6 router interfaces with vRtrIfAdminState equal 'inService' on this virtual router." ::= { vRtrStatEntry 44 } vRtrV6StatIllegalLabels OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatIllegalLabels indicates the number of illegally received v6 labels on this virtual router." ::= { vRtrStatEntry 45 } vRtrV6StatCurrNumRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatCurrNumRoutes indicates the current number of v6 routes in the VRF for this virtual router." ::= { vRtrStatEntry 46 } vRtrV6StatBGPVpnRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatBGPVpnRoutes indicates the current number of VPN-IPV6 routes learned by MP-BGP for this virtual router." ::= { vRtrStatEntry 47 } vRtrV6StatBGPVpnActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatBGPVpnActiveRoutes indicates the current number of active VPN-IPV6 routes learned by MP-BGP for this virtual router." ::= { vRtrStatEntry 48 } vRtrV6StatTotalLdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatTotalLdpTunnels indicates the current number of both active and inactive v6 LDP tunnels." ::= { vRtrStatEntry 49 } vRtrV6StatTotalSdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatTotalSdpTunnels indicates the current number of both active and inactive v6 SDP tunnels." ::= { vRtrStatEntry 50 } vRtrV6StatActiveLdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatActiveLdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'ldp'." ::= { vRtrStatEntry 51 } vRtrV6StatActiveSdpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatActiveSdpTunnels indicates the current number of v6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'sdp'." ::= { vRtrStatEntry 52 } vRtrV6MulticastRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6MulticastRoutes indicates the current number of v6 rows in the vRtrPimNgGrpSrcTable." ::= { vRtrStatEntry 53 } vRtrV6StatActiveNbrEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatActiveNbrEntries indicates the number of active V6 neighbor discovery entries for the specified virtual router in the system." ::= { vRtrStatEntry 54 } vRtrV6StatTotalNbrEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6StatTotalNbrEntries indicates the total number of active and inactive v6 neighbor discovery entries for the specified virtual router in the system." ::= { vRtrStatEntry 55 } vRtrSubMgmtRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrSubMgmtRoutes indicates the total number of subscriber management routes in the route Table." ::= { vRtrStatEntry 56 } vRtrSubMgmtActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrSubMgmtActiveRoutes indicates the number of active subscriber management routes." ::= { vRtrStatEntry 57 } vRtrStatTotalRsvpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatTotalRsvpTunnels indicates the current number of both active and inactive RSVP tunnels." ::= { vRtrStatEntry 58 } vRtrStatActiveRsvpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatActiveRsvpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'." ::= { vRtrStatEntry 59 } vRtrV6StatTotalRsvpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6StatTotalRsvpTunnels indicates the current number of both active and inactive IPv6 RSVP tunnels." ::= { vRtrStatEntry 60 } vRtrV6StatActiveRsvpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6StatActiveRsvpTunnels indicates the current number of IPv6 rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'rsvp'." ::= { vRtrStatEntry 61 } vRtrHostRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrHostRoutes indicates the current number of direct routes with prefix value 32 for this instance of the route table." ::= { vRtrStatEntry 62 } vRtrHostActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrHostActiveRoutes indicates the current number of active direct routes with prefix value 32 for this instance of the route table." ::= { vRtrStatEntry 63 } vRtrV6HostRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6HostRoutes indicates the current number of v6 direct routes with prefix value 128 for this instance of the route table." ::= { vRtrStatEntry 64 } vRtrV6HostActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6HostActiveRoutes indicates the current number of v6 active direct routes with prefix value 128 for this instance of the route table." ::= { vRtrStatEntry 65 } vRtrStatLocalARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatLocalARPEntries indicates the total number of active and inactive local ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 66 } vRtrStatStaticARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatStaticARPEntries indicates the total number of active and inactive static ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 67 } vRtrStatDynamicARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatDynamicARPEntries indicates the total number of active and inactive dynamic ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 68 } vRtrStatManagedARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatManagedARPEntries indicates the total number of active and inactive managed ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 69 } vRtrStatInternalARPEntries OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatInternalARPEntries indicates the total number of active and inactive internal ARP entries for the specified virtual router in the system." ::= { vRtrStatEntry 70 } vRtrManagedRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrManagedRoutes indicates the total number of active and inactive managed routes for the specified virtual router in the system." ::= { vRtrStatEntry 71 } vRtrManagedActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrManagedActiveRoutes indicates the total number of active managed routes for the specified virtual router in the system." ::= { vRtrStatEntry 72 } vRtrLDPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrLDPRoutes indicates the current number of ldp routes for this instance of the route table." ::= { vRtrStatEntry 73 } vRtrLDPActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrLDPActiveRoutes indicates the current number of active ldp routes for this instance of the route table." ::= { vRtrStatEntry 74 } vRtrVPNLeakRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrVPNLeakRoutes indicates the current number of VPN Leak routes for this instance of the route table." ::= { vRtrStatEntry 75 } vRtrVPNLeakActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrVPNLeakActiveRoutes indicates the current number of active VPN Leak routes for this instance of the route table." ::= { vRtrStatEntry 76 } vRtrV6VPNLeakRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6VPNLeakRoutes indicates the current number of v6 VPN Leak routes for this instance of the route table." ::= { vRtrStatEntry 77 } vRtrV6VPNLeakActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6VPNLeakActiveRoutes indicates the current number of v6 active VPN Leak routes for this instance of the route table." ::= { vRtrStatEntry 78 } vRtrV6SubMgmtRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6SubMgmtRoutes indicates the current number of v6 subscriber management routes for this instance of the route table." ::= { vRtrStatEntry 79 } vRtrV6SubMgmtActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrV6SubMgmtActiveRoutes indicates the current number of v6 active subscriber management routes for this instance of the route table." ::= { vRtrStatEntry 80 } vRtrMobileHostRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMobileHostRoutes indicates the current number of IPv4 Mobile Host routes for this instance of the route table." ::= { vRtrStatEntry 81 } vRtrMobileHostActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMobileHostActiveRoutes indicates the current number of IPv4 active Mobile Host routes for this instance of the route table." ::= { vRtrStatEntry 82 } vRtrV6MobileHostRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6MobileHostRoutes indicates the current number of IPv6 Mobile Host routes for this instance of the route table." ::= { vRtrStatEntry 83 } vRtrV6MobileHostActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6MobileHostActiveRoutes indicates the current number of IPv6 active Mobile Host routes for this instance of the route table." ::= { vRtrStatEntry 84 } vRtrStatTotalBgpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatTotalBgpTunnels indicates the current number of both active and inactive BGP tunnels." ::= { vRtrStatEntry 85 } vRtrStatActiveBgpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatActiveBgpTunnels indicates the current number of rows in the vRtrTunnelTable where vRtrTunnelType has a value of 'bgp'." ::= { vRtrStatEntry 86 } vRtrNatRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrNatRoutes indicates the current number of IPv4 NAT (Network Address Translation) routes for this instance of the route table." ::= { vRtrStatEntry 87 } vRtrNatActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrNatActiveRoutes indicates the current number of IPv4 NAT routes for this instance of the route table." ::= { vRtrStatEntry 88 } vRtrV6NatRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6NatRoutes indicates the current number of IPv6 NAT routes for this instance of the route table." ::= { vRtrStatEntry 89 } vRtrV6NatActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6NatActiveRoutes indicates the current number of IPv6 active NAT routes for this instance of the route table." ::= { vRtrStatEntry 90 } vRtrPeriodicRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPeriodicRoutes indicates the current number of periodic routes for this instance of the route table." ::= { vRtrStatEntry 91 } vRtrPeriodicActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPeriodicActiveRoutes indicates the current number of active periodic routes for this instance of the route table." ::= { vRtrStatEntry 92 } vRtrV6PeriodicRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6PeriodicRoutes indicates the current number of IPv6 periodic routes for this instance of the route table." ::= { vRtrStatEntry 93 } vRtrV6PeriodicActiveRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6PeriodicActiveRoutes indicates the current number of active IPv6 periodic routes for this instance of the route table." ::= { vRtrStatEntry 94 } vRtrStatTotalMplsTpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatTotalMplsTpTunnels indicates the current number of both active and inactive MPLS-TP tunnels." ::= { vRtrStatEntry 97 } vRtrStatActiveMplsTpTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrStatActiveMplsTpTunnels indicates the current number of active MPLS-TP tunnels." ::= { vRtrStatEntry 98 } -- -- Virtual Router Interfaces Table -- vRtrIfTotalNumber OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The number of router interfaces configured in this system." ::= { tmnxVRtrObjs 3 } vRtrIfTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfTable has an entry for each router interface configured in the system." ::= { tmnxVRtrObjs 4 } vRtrIfEntry OBJECT-TYPE SYNTAX VRtrIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable." INDEX { vRtrID, vRtrIfIndex } ::= { vRtrIfTable 1 } VRtrIfEntry ::= SEQUENCE { vRtrIfIndex InterfaceIndex, vRtrIfRowStatus RowStatus, vRtrIfType INTEGER, vRtrIfName TNamedItem, vRtrIfPortID TmnxPortID, vRtrIfChannelID Unsigned32, vRtrIfEncapValue TmnxEncapVal, vRtrIfAdminState TmnxAdminState, vRtrIfOperState TmnxOperState, vRtrIfAlias DisplayString, vRtrIfPhysicalAddress MacAddress, vRtrIfArpTimeout Unsigned32, vRtrIfIcmpMaskReply TruthValue, vRtrIfIcmpRedirects TruthValue, vRtrIfIcmpNumRedirects Unsigned32, vRtrIfIcmpRedirectsTime Unsigned32, vRtrIfIcmpUnreachables TruthValue, vRtrIfIcmpNumUnreachables Unsigned32, vRtrIfIcmpUnreachablesTime Unsigned32, vRtrIfIcmpTtlExpired TruthValue, vRtrIfIcmpNumTtlExpired Unsigned32, vRtrIfIcmpTtlExpiredTime Unsigned32, vRtrIfNtpBroadcast TruthValue, vRtrIfUnnumbered IpAddress, vRtrIfMtu Unsigned32, vRtrIfQosPolicyId TNetworkPolicyID, vRtrIfIngressFilterId TIPFilterID, vRtrIfEgressFilterId TIPFilterID, vRtrIfDirectedBroadcast TruthValue, vRtrIfMplsStatus TmnxStatus, vRtrIfUnnumberedIf DisplayString, vRtrIfCflowd INTEGER, vRtrIfVPNClass INTEGER, vRtrIfDescription TItemLongDescription, vRtrIfProtocol BITS, vRtrIfTosMarkingTrusted TruthValue, vRtrIfServiceId TmnxServId, vRtrIfArpPopulate INTEGER, vRtrIfIPv6ConfigAllowed TruthValue, vRtrIfIPv6OperState TmnxOperState, vRtrIfIPv6IngressFilterId TIPFilterID, vRtrIfIPv6EgressFilterId TIPFilterID, vRtrIfIcmpV6Redirects TruthValue, vRtrIfIcmpV6NumRedirects Unsigned32, vRtrIfIcmpV6RedirectsTime Unsigned32, vRtrIfIcmpV6Unreachables TruthValue, vRtrIfIcmpV6NumUnreachables Unsigned32, vRtrIfIcmpV6UnreachablesTime Unsigned32, vRtrIfIcmpV6TimeExceeded TruthValue, vRtrIfIcmpV6NumTimeExceeded Unsigned32, vRtrIfIcmpV6TimeExceededTime Unsigned32, vRtrIfIcmpV6PktTooBig TruthValue, vRtrIfIcmpV6NumPktTooBig Unsigned32, vRtrIfIcmpV6PktTooBigTime Unsigned32, vRtrIfIcmpV6ParamProblem TruthValue, vRtrIfIcmpV6NumParamProblem Unsigned32, vRtrIfIcmpV6ParamProblemTime Unsigned32, vRtrIfLinkLocalAddressType InetAddressType, vRtrIfLinkLocalAddress InetAddress, vRtrIfLinkLocalAddressState TmnxInetAddrState, vRtrIfLastOperStateChange TimeStamp, vRtrIfOperMtu Unsigned32, vRtrIfGlobalIndex Unsigned32, vRtrIfDelaySeconds Unsigned32, vRtrIfDelayUpTimer Integer32, vRtrIfLocalDhcpServerName TNamedItemOrEmpty, vRtrIfInitDelayEnable TruthValue, vRtrIfCpmProtPolicyId TCpmProtPolicyID, vRtrIfCpmProtUncfgdProtoDropCnt Gauge32, vRtrIfLdpSyncTimer Unsigned32, vRtrIfStripLabel TruthValue, vRtrIfuRPFCheckState TmnxEnabledDisabled, vRtrIfuRPFCheckMode INTEGER, vRtrIfQosQGrp TNamedItemOrEmpty, vRtrIfAdminLinkLocalAddrType InetAddressType, vRtrIfAdminLinkLocalAddr InetAddress, vRtrIfAdmLnkLclAddrPreferred TruthValue, vRtrIfOperDownReason BITS } vRtrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The unique value which identifies this interface of this virtual router in the Tmnx system. This field provides an identifier for virtual router interfaces similar to the ifIndex values used in the mib-2 interfaces table for physical interfaces. The vRtrIfIndex values can be reused for different virtual routers, but are unique within those entries with the same vRtrID. The vRtrIfIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next." ::= { vRtrIfEntry 1 } vRtrIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status. The creation or deletion of a router interface entry causes creation or deletion of corresponding entries in other Tmnx MIB tables with the same vRtrID and vRtrIfIndex values, such as the vRtrIpAddrTable. The router interface is associated to a physical port interface through the vRtrIfPortID and vRtrIfEncapValue variables. The RowStatus cannot be SET to 'active' unless vRtrIfName has been initialized." ::= { vRtrIfEntry 2 } vRtrIfType OBJECT-TYPE SYNTAX INTEGER { network(1), service(2), serviceIes(3), serviceRtdVpls(4), --obsolete serviceVprn(5), serviceIesSubscriber(6), serviceIesGroup(7), serviceVprnSubscriber(8), serviceVprnGroup(9), serviceIesRedundant(10), serviceVprnRedundant(11), serviceVpls(12), serviceIesCem(13), --not supported serviceVprnCem(14), --not supported serviceVprnIPsec(15), serviceVprnIPMirror(16), serviceVideo(17), serviceVplsVideo(18), multiHomingPrimary(19), multiHomingSecondary(20), serviceIesTunnel(21), serviceIpReas(22), networkIpReas(23), networkVprn(24), tmsService(25), serviceIesAarp(26), serviceVprnAarp(27), serviceIesAa(28), serviceVprnAa(29), unnumMplsTp(30) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfType specifies the type of this interface. Different virtual router interface types are defined as follows: network - defined on a network port. service - used internally. serviceIes - defined on a SAP or Spoke SDP. serviceRtdVpls - obsoleted. serviceVprn - defined on a SAP or Spoke SDP. serviceIesSubscriber - used internally. serviceIesGroup - defined on a SAP serviceVprnSubscriber - used internally. serviceVprnGroup - defined on a SAP. serviceIesRedundant - defined on a Spoke SDP. serviceVprnRedundant - defined on a Spoke SDP. serviceVpls - defined on an IP endpoint for VPLS. serviceIesCem - defined on a SAP. --not supported serviceVprnCem - defined on a SAP. --not supported serviceVprnIPsec - defined on a SAP. serviceVprnIPMirror - defined on a Mirror. serviceVideo - defined on a video SAP. serviceVplsVideo - defined on an IP endpoint for video interface for VPLS. multiHomingPrimary - defined for a primary interface. multiHomingSecondary - defined for a secondary interface. serviceIesTunnel - defined on a SAP. serviceIpReas - defined on a network port. networkIpReas - defined on a network port. networkVprn - network interface defined in a VPRN. tmsService - threat management service interface. serviceIesAarp - defined on an AARP (Assymetry Removal) Spoke SDP. serviceVprnAarp - defined on an AARP Spoke SDP. serviceIesAa - defined on an AA (Application Assurance) SAP. serviceVprnAa - defined on an AA SAP. unnumMplsTp - defined for an unummbered mpls tp interface." ::= { vRtrIfEntry 3 } vRtrIfName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The administrative name assigned this router interface. The interface name must be unique among entries with the same vRtrID value. In order for row creation to succeed, a value must also be assigned to vRtrIfName." ::= { vRtrIfEntry 4 } vRtrIfPortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-create STATUS current DESCRIPTION "The physical port to which this interface is bound. If vRtrIfPortID is zero (0), then there is no binding between this virtual router interface and a physical port. Once an interface has been bound to a port, several steps are required to change the binding to some other TmnxPortID value. vRtrIfAdminState must be 'outOfService'; vRtrIfPortID must be set to zero (0) to disassociate the interface from the original port binding; finally, set vRtrIfPortID to the value for the new port binding. Setting vRtrIfPortID to 0x20000001 indicates that this interface is the system interface for the device." DEFVAL { 0 } ::= { vRtrIfEntry 5 } vRtrIfChannelID OBJECT-TYPE SYNTAX Unsigned32 (0..64) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When the physical port, vRtrIfPortID, is a SONET port, vRtrIfChannelID is the STSx channel number used by this interface. If vRtrIfPortID is not a SONET port or the interface has not yet been bound to a physical port, vRtrIfChannelID will be zero (0). This object was obsoleted in release 5.0." DEFVAL { 0 } ::= { vRtrIfEntry 6 } vRtrIfEncapValue OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the label used along with vRtrIfPortID to identify a SAP on the specified access port." ::= { vRtrIfEntry 7 } vRtrIfAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state for this router interface." DEFVAL { outOfService } ::= { vRtrIfEntry 8 } vRtrIfOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status of this router interface." ::= { vRtrIfEntry 9 } vRtrIfAlias OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "An alternative administrative name assigned this router interface." ::= { vRtrIfEntry 10 } vRtrIfPhysicalAddress OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The interface's address at its protocol sub-layer. For example, for an 802.x interface, this object normally contains a MAC address. The interface's media-specific MIB must define the bit and byte ordering and the format of the value of this object. For interfaces which do not have such an address (e.g., a serial line), this object should contain an octet string of zero length." ::= { vRtrIfEntry 11 } vRtrIfArpTimeout OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfArpTimeout determines how long an ARP entry associated with this interface remains in the ARP cache. When vRtrIfArpTimeout has a value of zero, '0', the entry will never be cleared from the cache." DEFVAL { 14400 } ::= { vRtrIfEntry 12 } vRtrIfIcmpMaskReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpMaskReply is set to 'true', a reply will be issued when this node is requested for the network mask for this subnet. The requesting node must be attached to the local network. When vRtrIfIcmpMaskReply is set to 'false', no reply is issued if an ICMP mask request is received." DEFVAL { true } ::= { vRtrIfEntry 13 } vRtrIfIcmpRedirects OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpRedirects is set to 'true', ICMP redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpRedirects is set to 'false', ICMP redirects are not generated." DEFVAL { true } ::= { vRtrIfEntry 14 } vRtrIfIcmpNumRedirects OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpNumRedirects limits the number of redirects issued per the time frame specified in vRtrIfIcmpRedirectsTime." DEFVAL { 100 } ::= { vRtrIfEntry 15 } vRtrIfIcmpRedirectsTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpRedirectsTime determines the time frame in seconds that is used to limit the number of redirects issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 16 } vRtrIfIcmpUnreachables OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpUnreachables is set to 'true', ICMP host and network unreachable messages are generated by this interface. When vRtrIfIcmpUnreachables is set to 'false', ICMP host and network unreachable messages are not sent." DEFVAL { true } ::= { vRtrIfEntry 17 } vRtrIfIcmpNumUnreachables OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpNumUnreachables determines how many destination unreachable messages are issued in the time frame specified by vRtrIfIcmpUnreachablesTime." DEFVAL { 100 } ::= { vRtrIfEntry 18 } vRtrIfIcmpUnreachablesTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpUnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable messages issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 19 } vRtrIfIcmpTtlExpired OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpTtlExpired is set to 'true', the rate that ttl-expired messages by this interface is throttled based on the values of vRtrIfIcmpNumTtlExpired and vRtrIfIcmpTtlExpiredTime. When vRtrIfIcmpTtlExpired is set to 'false', unlimited ttl-expired messages are sent." DEFVAL { true } ::= { vRtrIfEntry 20 } vRtrIfIcmpNumTtlExpired OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpNumTtlExpired defines how many ttl-expired messages will be issued in the time frame specified by vRtrIfIcmpTtlExpiredTime." DEFVAL { 100 } ::= { vRtrIfEntry 21 } vRtrIfIcmpTtlExpiredTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpTtlExpiredTime sets the time frame in seconds that is used to limit the number of ttl-expired messages issued by this interface with the specified time frame." DEFVAL { 10 } ::= { vRtrIfEntry 22 } vRtrIfNtpBroadcast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfNtpBroadcast is set to 'true', NTP/SNTP broadcasts will be received on this interface." DEFVAL { false } ::= { vRtrIfEntry 23 } vRtrIfUnnumbered OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address to be used when generating packets on this interface. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0.0.0.0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null. A value of '255.255.255.255' implies the use of system-ip. It is strongly suggested to use the node's system IP address as it is not associated with a particular physical interface and is therefore always reachable." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { vRtrIfEntry 24 } vRtrIfMtu OBJECT-TYPE SYNTAX Unsigned32(0|512..9000) UNITS "bytes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfMtu is used to reflect the MTU size of this interface in the header of an ICMP MTU exceeded message when a packet is too large to be transmitted on this interface. The default size is calculated by subtracting the DLC header size from the physical MTU size of the interface. When a SNMP SET request is received with a value of zero (0), the agent actually sets vRtrIfMtu to the calculated default size." DEFVAL { 0 } ::= { vRtrIfEntry 25 } vRtrIfQosPolicyId OBJECT-TYPE SYNTAX TNetworkPolicyID MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrIfQosPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface. This object is obsoleted in release 10.0 and replaced with object vRtrIfQosNetworkPolicyId." DEFVAL { 1 } ::= { vRtrIfEntry 26 } vRtrIfIngressFilterId OBJECT-TYPE SYNTAX TIPFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIngressFilterId associates an ip-filter-id with an ingress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface." DEFVAL { 0 } ::= { vRtrIfEntry 27 } vRtrIfEgressFilterId OBJECT-TYPE SYNTAX TIPFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfEgressFilterId associates an ip-filter-id with an egress interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface." DEFVAL { 0 } ::= { vRtrIfEntry 28 } vRtrIfDirectedBroadcast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfDirectedBroadcast is set to 'true', allows broadcasts directed to this interface to be accepted. When 'false', directed broadcasts are dropped. This is of particular use when preventing denial of service attacks." DEFVAL { false } ::= { vRtrIfEntry 29 } vRtrIfMplsStatus OBJECT-TYPE SYNTAX TmnxStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Setting this variable to 'create' causes this interface to be used with MPLS. It also causes a row to be created in the vRtrMplsIfTable. Setting it to 'delete' removes the interface from MPLS and causes the corresponding row in the vRtrMplsIfTable to be removed. However, an attempt to set vRtrIfMplsStatus to 'delete' will fail if MPLS activity on this interface is not administratively in the outOfService state, i.e. vRtrMplsIfAdminState of the vRtrMplsIfTable must be set to 'outOfService'." DEFVAL { delete } ::= { vRtrIfEntry 30 } vRtrIfUnnumberedIf OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the interface to which this unnumbered interface will refer to. This variable is complemented by vRtrIfUnnumbered. If vRtrIfUnnumberedIf is a null-string and vRtrIfUnnumbered is '0' it implies that no unnumbered interface is configured. At any instant only one of the two members can be non-null." ::= { vRtrIfEntry 31 } vRtrIfCflowd OBJECT-TYPE SYNTAX INTEGER { none (1), aclIngressOnly (2), interfaceIngressOnly (3), aclEgressOnly (4), interfaceEgressOnly (5), aclIngressEgress (6), interfaceIngressEgress (7) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfCflowd specifies the type and direction of Cflowd analysis applied to this interface. A Cflowd profile controls the sampling and analysis of data flows through the router. A value of 'none (1)' indicates that there is no Cflowd analysis associated with this interface." DEFVAL { none } ::= { vRtrIfEntry 32 } vRtrIfVPNClass OBJECT-TYPE SYNTAX INTEGER { unknown (0), carrierOfCarrier (1), enterprise (2), interProvider (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfVPNClass specifies the type of VPN scenario supported on this virtual router interface." ::= { vRtrIfEntry 33 } vRtrIfDescription OBJECT-TYPE SYNTAX TItemLongDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDescription is a user provided description string for this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } -- the empty string ::= { vRtrIfEntry 34 } vRtrIfProtocol OBJECT-TYPE SYNTAX BITS { ospfv2 (0), rip (1), isis (2), bgp (3), mpls (4), rsvp (5), ldp (6), igmp (7), pim (8), ospf3 (9), mld (10) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfProtocol indicates which protocols are running on this virtual router interface. If the bit corresponding to a protocol is set, then the protocol is enabled on this interface." ::= { vRtrIfEntry 35 } vRtrIfTosMarkingTrusted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfTosMarkingTrusted specifies whether the TOS bits on the packets ingressing on the interface should be trusted by the system or not. If the value is set to 'true', the TOS bits should be trusted. If the system does not trust these packets, it will remark the packets upon egress as indicated by the value of the egress remark flag, TIMETRA-QOS-MIB:: tNetworkPolicyEgressRemark. The egress remark flag is part of the QoS policy applied to the network interface. The interfaces belonging to the IES service have the egress remark flag set to not trusted, 'false', by default. For all other interface types, the TOS bits are trusted by default." DEFVAL { true } ::= { vRtrIfEntry 36 } vRtrIfServiceId OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfServiceId specifies the service id for this interface. This object must always be set at row creation when the vRtrIfType is not network(1). This object cannot be modified once the row is created." DEFVAL { 0 } ::= { vRtrIfEntry 37 } vRtrIfArpPopulate OBJECT-TYPE SYNTAX INTEGER { disabled (1), enabled (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfArpPopulate specifies the ARP populate action. The value disabled means that the normal ARP protocol is active. The value enabled means that the system will not originate ARP requests on this interface. The ARP cache is only populated with MAC addresses learned via the DHCP protocol. If the value of vRtrIfType is network, this object can only be set to disabled." DEFVAL { disabled } ::= { vRtrIfEntry 38 } vRtrIfIPv6ConfigAllowed OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIPv6ConfigAllowed specifies whether IPv6 can be configured on this router interface. When the value is 'true', IPv6 can be configured on this interface. When it is 'false', IPv6 cannot be configured. Object iesIfIPv6ConfigAllowed should be set if vRtrIfType is 'subscriber' or 'group'." DEFVAL { false } ::= { vRtrIfEntry 39 } vRtrIfIPv6OperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The current operational status for IPv6 on this router interface." ::= { vRtrIfEntry 40 } vRtrIfIPv6IngressFilterId OBJECT-TYPE SYNTAX TIPFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIPv6IngressFilterId associates an ip-filter-id with an ingress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface." DEFVAL { 0 } ::= { vRtrIfEntry 41 } vRtrIfIPv6EgressFilterId OBJECT-TYPE SYNTAX TIPFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIPv6EgressFilterId associates an ip-filter-id with an egress v6 interface. Filters control the forwarding and dropping of packets based on IP criteria. A value of zero (0) indicates that there is no ip-filter-id associated with this interface. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface." DEFVAL { 0 } ::= { vRtrIfEntry 42 } vRtrIfIcmpV6Redirects OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpV6Redirects is set to 'true', ICMPv6 redirects are generated when routes are not optimal on this router and another router on the same subnetwork has a better route in order to alert that node that a better route is available. When vRtrIfIcmpV6Redirects is set to 'false', ICMPv6 redirects are not generated." DEFVAL { true } ::= { vRtrIfEntry 43 } vRtrIfIcmpV6NumRedirects OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6NumRedirects limits the number of v6 redirects issued per the time frame specified in vRtrIfIcmpV6RedirectsTime." DEFVAL { 100 } ::= { vRtrIfEntry 44 } vRtrIfIcmpV6RedirectsTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6RedirectsTime determines the time frame in seconds that is used to limit the number of v6 redirects issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 45 } vRtrIfIcmpV6Unreachables OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrIfIcmpV6Unreachables is set to 'true', ICMPv6 host and network unreachable messages are generated by this interface. When vRtrIfIcmpV6Unreachables is set to 'false', ICMPv6 host and network unreachable messages are not sent." DEFVAL { true } ::= { vRtrIfEntry 46 } vRtrIfIcmpV6NumUnreachables OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6NumUnreachables determines how many destination unreachable ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6UnreachablesTime." DEFVAL { 100 } ::= { vRtrIfEntry 47 } vRtrIfIcmpV6UnreachablesTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6UnreachablesTime sets the time frame in seconds that is used to limit the number of destination unreachable ICMPv6 messages issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 48 } vRtrIfIcmpV6TimeExceeded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6TimeExceeded specifies whether time-exceeded ICMP messages should be sent. When it is set to 'true', ICMPv6 time-exceeded messages are generated by this interface. When vRtrIfIcmpV6TimeExceeded is set to 'false', ICMPv6 time-exceeded messages are not sent." DEFVAL { true } ::= { vRtrIfEntry 49 } vRtrIfIcmpV6NumTimeExceeded OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6NumTimeExceeded specifies how many time-exceeded ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6TimeExceededTime." DEFVAL { 100 } ::= { vRtrIfEntry 50 } vRtrIfIcmpV6TimeExceededTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6TimeExceededTime specifies the time frame in seconds that is used to limit the number of time-exceeded ICMPv6 messages issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 51 } vRtrIfIcmpV6PktTooBig OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6PktTooBig specifies whether packet-too-big ICMP messages should be sent. When it is set to 'true', ICMPv6 packet-too-big messages are generated by this interface. When vRtrIfIcmpV6PktTooBig is set to 'false', ICMPv6 packet-too-big messages are not sent." DEFVAL { true } ::= { vRtrIfEntry 52 } vRtrIfIcmpV6NumPktTooBig OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6NumPktTooBig specifies how many packet-too-big ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6PktTooBigTime." DEFVAL { 100 } ::= { vRtrIfEntry 53 } vRtrIfIcmpV6PktTooBigTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6PktTooBigTime specifies the time frame in seconds that is used to limit the number of packet-too-big ICMPv6 messages issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 54 } vRtrIfIcmpV6ParamProblem OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6ParamProblem specifies whether parameter-problem ICMP messages should be sent. When it is set to 'true', ICMPv6 parameter-problem messages are generated by this interface. When vRtrIfIcmpV6ParamProblem is set to 'false', ICMPv6 parameter-problem messages are not sent." DEFVAL { true } ::= { vRtrIfEntry 55 } vRtrIfIcmpV6NumParamProblem OBJECT-TYPE SYNTAX Unsigned32 (10..1000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6NumParamProblem specifies how many parameter-problem ICMPv6 messages are issued in the time frame specified by vRtrIfIcmpV6ParamProblemTime." DEFVAL { 100 } ::= { vRtrIfEntry 56 } vRtrIfIcmpV6ParamProblemTime OBJECT-TYPE SYNTAX Unsigned32 (1..60) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIcmpV6ParamProblemTime specifies the time frame in seconds that is used to limit the number of parameter-problem ICMPv6 messages issued per time frame." DEFVAL { 10 } ::= { vRtrIfEntry 57 } vRtrIfLinkLocalAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfLinkLocalAddressType indicates the IP address type of the link local address of this virtual router interface. When the value of vRtrIfIPv6OperState is 'inService', this object will have a value of 'ipv6z', and 'unknown' otherwise." ::= { vRtrIfEntry 58 } vRtrIfLinkLocalAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|20)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfLinkLocalAddress indicates the link local IP address of this virtual router interface. This address valid when the value of vRtrIfIPv6OperState is 'inService'." ::= { vRtrIfEntry 59 } vRtrIfLinkLocalAddressState OBJECT-TYPE SYNTAX TmnxInetAddrState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfLinkLocalAddressState indicates the address state of vRtrIfLinkLocalAddress. When vRtrIfIPv6OperState is 'outOfService', the value of this object is 'unknown'." ::= { vRtrIfEntry 60 } vRtrIfLastOperStateChange OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfLastOperStateChange indicates the sysUpTime when the operational state of this interface last changed." ::= { vRtrIfEntry 61 } vRtrIfOperMtu OBJECT-TYPE SYNTAX Unsigned32 UNITS "bytes" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfOperMtu indicates the operational value of the IP MTU on this interface. It is the minimum of the vRtrIfMtu and the MTU of the physical port this interface is bound to." ::= { vRtrIfEntry 62 } vRtrIfGlobalIndex OBJECT-TYPE SYNTAX Unsigned32 (0..262144) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfGlobalIndex uniquely identifies this interface in the tmnx system. This field provides an identifier for router interfaces similar to the vRtrIfIndex value, except that vRtrIfIndex is unique within each virtual router. The vRtrIfGlobalIndex is unique system wide regardless of the vRtrID. The vRtrIfGlobalIndex value for each virtual interface must remain constant at least from one re-initialization of the system management processor to the next." ::= { vRtrIfEntry 63 } vRtrIfDelaySeconds OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDelaySeconds specifies the time in seconds that is used to bring up the interface. When interface comes up, it will not become operational until after the specified delay. When used to configure delayed-enable for a router interface, the values specified for vRtrIfDelaySeconds can be in the range of 0..1200. When used to configure hold-time of a Multi-homing secondary interface, the values specified can be in the range of 0..65535. The default value of vRtrIfDelaySeconds is also based on the router interface type. When used for a regular interface its default value is 0. When used for a Multi-homing secondary interface, its default value is 30." ::= { vRtrIfEntry 64 } vRtrIfDelayUpTimer OBJECT-TYPE SYNTAX Integer32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfDelayUpTimer indicates the time left before the interface comes up when vRtrIfDelaySeconds is configured to a non-zero value. When the interface is down, this object will return the value -1. It's value can be in the range 0 to vRtrIfDelaySeconds's value if the interface is 'about to come up'. If the interface is up, the value of vRtrIfDelayUpTimer will be 0." ::= { vRtrIfEntry 65 } vRtrIfLocalDhcpServerName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfLocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an ip-address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router." DEFVAL { ''H } ::= { vRtrIfEntry 66 } vRtrIfInitDelayEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfInitDelayEnable specifies whether vRtrIfDelaySeconds is used only the next time or everytime the system attempts to bring the interface operationally up. The value of vRtrIfInitDelayEnable is ignored if the value of vRtrIfDelaySeconds is set to 0. The value of vRtrIfInitDelayEnable is only set when interface is of type subscriber-interface. When the value vRtrIfInitDelayEnable is set to 'false', everytime the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds. When the value vRtrIfInitDelayEnable is set to 'true', only the next time the system attempts to bring the interface operationally up, it will be delayed by the value of vRtrIfDelaySeconds." DEFVAL { false } ::= { vRtrIfEntry 67 } vRtrIfCpmProtPolicyId OBJECT-TYPE SYNTAX TCpmProtPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfCpmProtPolicyId associates a CPM Protection policy with an interface. A value of zero (0) specifies that no CPM Protection policy is associated with this interface. A value of one (1) specifies that the default CPM Protection policy is associated with this interface. If no value for vRtrIfCpmProtPolicyId is specified when the vRtrIfEntry is created, the system assigns a default value, derived from the value of the object vRtrIfType, as follows: vRtrIfType vRtrIfCpmProtPolicyId --------------------------------------------------------------------- network 1 service used internally. serviceIes 1 serviceRtdVpls obsoleted. serviceVprn 1 serviceIesSubscriber 0 serviceIesGroup 0 serviceVprnSubscriber used internally. serviceVprnGroup 0 serviceIesRedundant 0 serviceVprnRedundant 0 serviceVpls 0 serviceIesCem defined on a SAP. --not supported serviceVprnCem defined on a SAP. --not supported serviceVprnIPsec 0 serviceVprnIPMirror 0 If an interface would get a default value of 'one', it is not allowed to set the value of vRtrIfCpmProtPolicyId to 'zero'. If an interface would get a default value of 'zero', it is not allowed to modify the value of vRtrIfCpmProtPolicyId. This object is not supported on SR-1 and ESS-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'." ::= { vRtrIfEntry 68 } vRtrIfCpmProtUncfgdProtoDropCnt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfCpmProtUncfgdProtoDropCnt indicates the number of network control protocol messages dropped due to the operation of the protocol protection facility. The protocol protection facility can be enabled and disabled by means of the object TIMETRA-SECURITY-MIB::tmnxCpmProtDropUncfgdProtocolMsg. When the protocol protection facility is enabled, network control protocol traffic received on this virtual router interface is dropped if the protocol is not configured on this virtual router interface. The value of vRtrIfProtocol indicates which protocols are configured on this virtual router interface. This object is not supported on SR-1 and ESS-1, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '5', and 7710, where the value of TIMETRA-CHASSIS-MIB::tmnxChassisType is '7' or '9'." ::= { vRtrIfEntry 69 } vRtrIfLdpSyncTimer OBJECT-TYPE SYNTAX Unsigned32 (0|1..1800) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfLdpSyncTimer specifies a time interval used for IGP-LDP synchronization. The timer is started from the time the LDP session to the neighbor is up over the interface. This is to allow for the label FEC bindings to be exchanged. When the timer expires, the link cost is restored and is re-advertised. IGP will announce a new best next-hop and LDP will use it if the label binding for the neighbor's FEC is available." DEFVAL { 0 } ::= { vRtrIfEntry 70 } vRtrIfStripLabel OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfStripLabel specifies whether a packet received on the interface will have it's MPLS labels stripped from the packet (true) or not (false)." DEFVAL { false} ::= { vRtrIfEntry 71 } vRtrIfuRPFCheckState OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfuRPFCheckState specifies whether unicast RPF (uRPF) Check is enabled on this interface." DEFVAL { disabled } ::= { vRtrIfEntry 72 } vRtrIfuRPFCheckMode OBJECT-TYPE SYNTAX INTEGER { strict (1), loose (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfuRPFCheckMode specifies the mode of unicast RPF check. In 'strict' mode, uRPF checks whether incoming packet has a source address that matches a prefix in the routing table, and whether the interface expects to receive a packet with this source address prefix. In 'loose' mode, uRPF checks whether incoming packet has source address with a corresponding prefix in the routing table, however 'loose' mode does not check whether the interface expects to receive a packet with a specific source address prefix. This object is valid only when value of vRtrIfuRPFCheckState is set to 'enabled'." DEFVAL { strict } ::= { vRtrIfEntry 73 } vRtrIfQosQGrp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrIfQosQGrp specifies the name of the QoS queue-group (TIMETRA-QOS-MIB::tQosEgrQGroupName) used with this interface. An 'inconsistentValue' error is returned if this object is set to a non-default value and an entry corresponding to vRtrIfPortID does not exist in TIMETRA-PORT-MIB::tPortNetEgrQGrpTable. This object is obsoleted in release 10.0 and replaced with object vRtrIfQosEgrPortRedirectQGrp." DEFVAL { ''H } ::= { vRtrIfEntry 74 } vRtrIfAdminLinkLocalAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfAdminLinkLocalAddrType specifies the IP address type of the link local address of this virtual router interface." DEFVAL { unknown } ::= { vRtrIfEntry 75 } vRtrIfAdminLinkLocalAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (0|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfAdminLinkLocalAddr specifies the link local IP address of this virtual router interface." DEFVAL { ''H } ::= { vRtrIfEntry 76 } vRtrIfAdmLnkLclAddrPreferred OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfAdmLnkLclAddrPreferred specifies whether vRtrIfAdminLinkLocalAddr specified for this interface should be treated as preferred." DEFVAL { false } ::= { vRtrIfEntry 77 } vRtrIfOperDownReason OBJECT-TYPE SYNTAX BITS { ifAdminDown (0), svcAdminDown (1), portOperDown (2), addrOrIfNotReady (3), assocObjNotReady (4), rvplsDown (5), operGrpDown (6), ifAdminDestroy (7), noIfAddress (8), noIfInfo (9), delayedStartEnabled (10), ifProtoOperDown (11), invalidPortCfg (12), unknown (13), ipv6Misconfig (14) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfOperDownReason specifies the reason why the interface is operationally down. The bit values are: 'ifAdminDown (0)' - Interface is administratively down 'svcAdminDown (1)' - Service is administratively down 'portOperDown (2)' - SAP port is operationally down 'addrOrIfNotReady (3)' - Address or Parent interface is not ready 'assocObjNotReady (4)' - Associated object is not ready 'rvplsDown (5)' - R-VPLS service is down 'operGrpDown (6)' - Associated Operational Group is down 'ifAdminDestroy (7)' - Interface is being deleted 'noIfAddress (8)' - Interface address is not configured 'noIfInfo (9)' - Interface info not present 'delayedStartEnabled (10)' - Delayed start timer is enabled on the interface 'ifProtoOperDown (11)' - Protocols on interface are operationally down 'invalidPortCfg (12)' - Port configuration is not valid 'unknown (13)' - Reason is unknown 'ipv6Misconfig (14)' - Ipv6 misconfiguration." ::= { vRtrIfEntry 78 } -- -- Virtual Router ICMPv6 Statistics Table -- vRtrIcmp6Table OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIcmp6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router instance." ::= { tmnxVRtrObjs 31 } vRtrIcmp6Entry OBJECT-TYPE SYNTAX VRtrIcmp6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the ICMP statistics of a virtual router instance. Entries are created and deleted when entries in the vRtrConfEntry are created and deleted." AUGMENTS { vRtrConfEntry } ::= { vRtrIcmp6Table 1 } VRtrIcmp6Entry ::= SEQUENCE { vRtrIcmp6InMsgs Counter32, vRtrIcmp6InErrors Counter32, vRtrIcmp6InDestUnreachs Counter32, vRtrIcmp6InAdminProhibs Counter32, vRtrIcmp6InTimeExcds Counter32, vRtrIcmp6InParmProblems Counter32, vRtrIcmp6InPktTooBigs Counter32, vRtrIcmp6InEchos Counter32, vRtrIcmp6InEchoReplies Counter32, vRtrIcmp6InRtrSolicits Counter32, vRtrIcmp6InRtrAdvertisements Counter32, vRtrIcmp6InNbrSolicits Counter32, vRtrIcmp6InNbrAdvertisements Counter32, vRtrIcmp6InRedirects Counter32, vRtrIcmp6InGrpMembQueries Counter32, vRtrIcmp6InGrpMembResponses Counter32, vRtrIcmp6InGrpMembReductions Counter32, vRtrIcmp6OutMsgs Counter32, vRtrIcmp6OutErrors Counter32, vRtrIcmp6OutDestUnreachs Counter32, vRtrIcmp6OutAdminProhibs Counter32, vRtrIcmp6OutTimeExcds Counter32, vRtrIcmp6OutParmProblems Counter32, vRtrIcmp6OutPktTooBigs Counter32, vRtrIcmp6OutEchos Counter32, vRtrIcmp6OutEchoReplies Counter32, vRtrIcmp6OutRtrSolicits Counter32, vRtrIcmp6OutRtrAdvertisements Counter32, vRtrIcmp6OutNbrSolicits Counter32, vRtrIcmp6OutNbrAdvertisements Counter32, vRtrIcmp6OutRedirects Counter32, vRtrIcmp6OutGrpMembQueries Counter32, vRtrIcmp6OutGrpMembResponses Counter32, vRtrIcmp6OutGrpMembReductions Counter32 } vRtrIcmp6InMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InMsgs indicates the total number of ICMP messages received by this router instance which includes all those counted by vRtrIcmp6InErrors." ::= { vRtrIcmp6Entry 1 } vRtrIcmp6InErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InErrors indicates the number of ICMP messages which this router instance received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.)." ::= { vRtrIcmp6Entry 2 } vRtrIcmp6InDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this router instance." ::= { vRtrIcmp6Entry 3 } vRtrIcmp6InAdminProhibs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this router instance." ::= { vRtrIcmp6Entry 4 } vRtrIcmp6InTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this router instance." ::= { vRtrIcmp6Entry 5 } vRtrIcmp6InParmProblems OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this router instance." ::= { vRtrIcmp6Entry 6 } vRtrIcmp6InPktTooBigs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this router instance." ::= { vRtrIcmp6Entry 7 } vRtrIcmp6InEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this router instance." ::= { vRtrIcmp6Entry 8 } vRtrIcmp6InEchoReplies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this router instance." ::= { vRtrIcmp6Entry 9 } vRtrIcmp6InRtrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this router instance." ::= { vRtrIcmp6Entry 10 } vRtrIcmp6InRtrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this router instance." ::= { vRtrIcmp6Entry 11 } vRtrIcmp6InNbrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this router instance." ::= { vRtrIcmp6Entry 12 } vRtrIcmp6InNbrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this router instance." ::= { vRtrIcmp6Entry 13 } vRtrIcmp6InRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InRedirects indicates number of ICMP Redirect messages received by this router instance." ::= { vRtrIcmp6Entry 14 } vRtrIcmp6InGrpMembQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this router instance." ::= { vRtrIcmp6Entry 15 } vRtrIcmp6InGrpMembResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this router instance." ::= { vRtrIcmp6Entry 16 } vRtrIcmp6InGrpMembReductions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this router instance." ::= { vRtrIcmp6Entry 17 } vRtrIcmp6OutMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutMsgs indicates the total number of ICMP messages which this router instance attempted to send. Note that this counter includes all those counted by icmpOutErrors." ::= { vRtrIcmp6Entry 18 } vRtrIcmp6OutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutErrors indicates the number of ICMP messages which this router instance did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtr IPv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value." ::= { vRtrIcmp6Entry 19 } vRtrIcmp6OutDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this router instance." ::= { vRtrIcmp6Entry 20 } vRtrIcmp6OutAdminProhibs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this router instance." ::= { vRtrIcmp6Entry 21 } vRtrIcmp6OutTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this router instance." ::= { vRtrIcmp6Entry 22 } vRtrIcmp6OutParmProblems OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this router instance." ::= { vRtrIcmp6Entry 23 } vRtrIcmp6OutPktTooBigs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this router instance." ::= { vRtrIcmp6Entry 24 } vRtrIcmp6OutEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this router instance." ::= { vRtrIcmp6Entry 25 } vRtrIcmp6OutEchoReplies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this router instance." ::= { vRtrIcmp6Entry 26 } vRtrIcmp6OutRtrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this router instance." ::= { vRtrIcmp6Entry 27 } vRtrIcmp6OutRtrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this router instance." ::= { vRtrIcmp6Entry 28 } vRtrIcmp6OutNbrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this router instance." ::= { vRtrIcmp6Entry 29 } vRtrIcmp6OutNbrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this router instance." ::= { vRtrIcmp6Entry 30 } vRtrIcmp6OutRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this router instance." ::= { vRtrIcmp6Entry 31 } vRtrIcmp6OutGrpMembQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this router instance." ::= { vRtrIcmp6Entry 32 } vRtrIcmp6OutGrpMembResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this router instance." ::= { vRtrIcmp6Entry 33 } vRtrIcmp6OutGrpMembReductions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this router instance." ::= { vRtrIcmp6Entry 34 } -- -- Virtual Router Interface ICMPv6 Statistics Table -- vRtrIfIcmp6Table OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfIcmp6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfIcmp6Table table contains statistics of ICMPv6 messages that are received and sourced by a router interface." ::= { tmnxVRtrObjs 32 } vRtrIfIcmp6Entry OBJECT-TYPE SYNTAX VRtrIfIcmp6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the ICMP statistics of a virtual router interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted." AUGMENTS { vRtrIfEntry } ::= { vRtrIfIcmp6Table 1 } VRtrIfIcmp6Entry ::= SEQUENCE { vRtrIfIcmp6InMsgs Counter32, vRtrIfIcmp6InErrors Counter32, vRtrIfIcmp6InDestUnreachs Counter32, vRtrIfIcmp6InAdminProhibs Counter32, vRtrIfIcmp6InTimeExcds Counter32, vRtrIfIcmp6InParmProblems Counter32, vRtrIfIcmp6InPktTooBigs Counter32, vRtrIfIcmp6InEchos Counter32, vRtrIfIcmp6InEchoReplies Counter32, vRtrIfIcmp6InRtrSolicits Counter32, vRtrIfIcmp6InRtrAdvertisements Counter32, vRtrIfIcmp6InNbrSolicits Counter32, vRtrIfIcmp6InNbrAdvertisements Counter32, vRtrIfIcmp6InRedirects Counter32, vRtrIfIcmp6InGrpMembQueries Counter32, vRtrIfIcmp6InGrpMembResponses Counter32, vRtrIfIcmp6InGrpMembReductions Counter32, vRtrIfIcmp6OutMsgs Counter32, vRtrIfIcmp6OutErrors Counter32, vRtrIfIcmp6OutDestUnreachs Counter32, vRtrIfIcmp6OutAdminProhibs Counter32, vRtrIfIcmp6OutTimeExcds Counter32, vRtrIfIcmp6OutParmProblems Counter32, vRtrIfIcmp6OutPktTooBigs Counter32, vRtrIfIcmp6OutEchos Counter32, vRtrIfIcmp6OutEchoReplies Counter32, vRtrIfIcmp6OutRtrSolicits Counter32, vRtrIfIcmp6OutRtrSolicitsTime TimeStamp, vRtrIfIcmp6OutRtrAdvertisements Counter32, vRtrIfIcmp6OutRtrAdvTime TimeStamp, vRtrIfIcmp6OutNbrSolicits Counter32, vRtrIfIcmp6OutNbrSolicitsTime TimeStamp, vRtrIfIcmp6OutNbrAdvertisements Counter32, vRtrIfIcmp6OutNbrAdvTime TimeStamp, vRtrIfIcmp6OutRedirects Counter32, vRtrIfIcmp6OutGrpMembQueries Counter32, vRtrIfIcmp6OutGrpMembResponses Counter32, vRtrIfIcmp6OutGrpMembReductions Counter32 } vRtrIfIcmp6InMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InMsgs indicates the total number of ICMP messages received by this interface which includes all those counted by vRtrIfIcmp6InErrors. Note that this interface is the interface to which the ICMP messages were addressed which may not be necessarily the input interface for the messages." ::= { vRtrIfIcmp6Entry 1 } vRtrIfIcmp6InErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InErrors indicates the number of ICMP messages which this interface received but determined as having ICMP-specific errors (bad ICMP checksums, bad length , etc.)." ::= { vRtrIfIcmp6Entry 2 } vRtrIfIcmp6InDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InDestUnreachs indicates the number of ICMP Destination Unreachable messages received by this interface." ::= { vRtrIfIcmp6Entry 3 } vRtrIfIcmp6InAdminProhibs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages received by this interface." ::= { vRtrIfIcmp6Entry 4 } vRtrIfIcmp6InTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InTimeExcds indicates the number of ICMP Time Exceeded messages received by this interface." ::= { vRtrIfIcmp6Entry 5 } vRtrIfIcmp6InParmProblems OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InParmProblems indicates the number of ICMP Parameter Problem messages received by this interface." ::= { vRtrIfIcmp6Entry 6 } vRtrIfIcmp6InPktTooBigs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InPktTooBigs indicates the number of ICMP Packet Too Big messages received by this interface." ::= { vRtrIfIcmp6Entry 7 } vRtrIfIcmp6InEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InEchos indicates the number of ICMP Echo (request) messages received by this interface." ::= { vRtrIfIcmp6Entry 8 } vRtrIfIcmp6InEchoReplies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InEchoReplies indicates the number of ICMP Echo Reply messages received by this interface." ::= { vRtrIfIcmp6Entry 9 } vRtrIfIcmp6InRtrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InRtrSolicits indicates the number of ICMP Router Solicit messages received by this interface." ::= { vRtrIfIcmp6Entry 10 } vRtrIfIcmp6InRtrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InRtrAdvertisements indicates the number of ICMP Router Advertisement messages received by this interface." ::= { vRtrIfIcmp6Entry 11 } vRtrIfIcmp6InNbrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InNbrSolicits indicates the number of ICMP Neighbor Solicit messages received by this interface." ::= { vRtrIfIcmp6Entry 12 } vRtrIfIcmp6InNbrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages received by this interface." ::= { vRtrIfIcmp6Entry 13 } vRtrIfIcmp6InRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InRedirects indicates number of ICMP Redirect messages received by this interface." ::= { vRtrIfIcmp6Entry 14 } vRtrIfIcmp6InGrpMembQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InGrpMembQueries indicates the number of ICMP Group Membership Query messages received by this interface." ::= { vRtrIfIcmp6Entry 15 } vRtrIfIcmp6InGrpMembResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InGrpMembResponses indicates the number of ICMP Group Membership Response messages received by this interface." ::= { vRtrIfIcmp6Entry 16 } vRtrIfIcmp6InGrpMembReductions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6InGrpMembReductions indicates the number of ICMP Group Membership Reduction messages received by this interface." ::= { vRtrIfIcmp6Entry 17 } vRtrIfIcmp6OutMsgs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutMsgs indicates the total number of ICMP messages which this interface attempted to send. Note that this counter includes all those counted by icmpOutErrors." ::= { vRtrIfIcmp6Entry 18 } vRtrIfIcmp6OutErrors OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutErrors indicates the number of ICMP messages which this interface did not send due to problems discovered within ICMP such as a lack of buffers. This value should not include errors discovered outside the ICMP layer such as the inability of VRtr IPv6 to route the resultant datagram. In some implementations there may be no types of error which contribute to this counter's value." ::= { vRtrIfIcmp6Entry 19 } vRtrIfIcmp6OutDestUnreachs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutDestUnreachs indicates the number of ICMP Destination Unreachable messages sent by this interface." ::= { vRtrIfIcmp6Entry 20 } vRtrIfIcmp6OutAdminProhibs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutAdminProhibs indicates the number of ICMP destination unreachable/communication administratively prohibited messages sent by this interface." ::= { vRtrIfIcmp6Entry 21 } vRtrIfIcmp6OutTimeExcds OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutTimeExcds indicates the number of ICMP Time Exceeded messages sent by this interface." ::= { vRtrIfIcmp6Entry 22 } vRtrIfIcmp6OutParmProblems OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutParmProblems indicates the number of ICMP Parameter Problem messages sent by this interface." ::= { vRtrIfIcmp6Entry 23 } vRtrIfIcmp6OutPktTooBigs OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutPktTooBigs indicates the number of ICMP Packet Too Big messages sent by this interface." ::= { vRtrIfIcmp6Entry 24 } vRtrIfIcmp6OutEchos OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutEchos indicates the number of ICMP Echo Request messages sent by this interface." ::= { vRtrIfIcmp6Entry 25 } vRtrIfIcmp6OutEchoReplies OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutEchoReplies indicates the number of ICMP Echo Reply messages sent by this interface." ::= { vRtrIfIcmp6Entry 26 } vRtrIfIcmp6OutRtrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutRtrSolicits indicates the number of ICMP Router Solicitation messages sent by this interface." ::= { vRtrIfIcmp6Entry 27 } vRtrIfIcmp6OutRtrSolicitsTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutRtrSolicitsTime indicates the system time when the last router solicitation message was sent by this interface." ::= { vRtrIfIcmp6Entry 28 } vRtrIfIcmp6OutRtrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutRtrAdvertisements indicates the number of ICMP Router Advertisement messages sent by this interface." ::= { vRtrIfIcmp6Entry 29 } vRtrIfIcmp6OutRtrAdvTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutRtrAdvTime indicates the system time when the last router advertisement message was sent by this interface." ::= { vRtrIfIcmp6Entry 30 } vRtrIfIcmp6OutNbrSolicits OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutNbrSolicits indicates the number of ICMP Neighbor Solicitation messages sent by this interface." ::= { vRtrIfIcmp6Entry 31 } vRtrIfIcmp6OutNbrSolicitsTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutNbrSolicitsTime indicates the system time when the last neighbor solicitation message was sent by this interface." ::= { vRtrIfIcmp6Entry 32 } vRtrIfIcmp6OutNbrAdvertisements OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutNbrAdvertisements indicates the number of ICMP Neighbor Advertisement messages sent by this interface." ::= { vRtrIfIcmp6Entry 33 } vRtrIfIcmp6OutNbrAdvTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutNbrAdvTime indicates the system time when the last neighbor advertisement message was sent by this interface." ::= { vRtrIfIcmp6Entry 34 } vRtrIfIcmp6OutRedirects OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutRedirects indicates the number of ICMP Redirect messages sent by this interface." ::= { vRtrIfIcmp6Entry 35 } vRtrIfIcmp6OutGrpMembQueries OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutGrpMembQueries indicates the number of ICMP Group Membership Query messages sent by this interface." ::= { vRtrIfIcmp6Entry 36 } vRtrIfIcmp6OutGrpMembResponses OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutGrpMembResponses indicates the number of ICMP Group Membership Response messages sent by this interface." ::= { vRtrIfIcmp6Entry 37 } vRtrIfIcmp6OutGrpMembReductions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIcmp6OutGrpMembReductions indicates the number of ICMP Group Membership Reduction messages sent by this interface." ::= { vRtrIfIcmp6Entry 38 } -- -- Virtual Router Interface Bi-directional Forwarding Detection table -- vRtrIfBfdTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfBfdEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The vRtrIfBfdTable table contains the configuration for Bi-directional Forwarding Detection (BFD) on the vRtrIfEntry with the same indices. The vRtrIfBfdTable is obsoleted and replaced with vRtrIfBfdExtTable in 9.0 Release." ::= { tmnxVRtrObjs 33 } vRtrIfBfdEntry OBJECT-TYPE SYNTAX VRtrIfBfdEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each row entry represents the BFD configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted. The vRtrIfBfdEntry is obsoleted and replaced with vRtrIfBfdExtEntry in 9.0 Release." AUGMENTS { vRtrIfEntry } ::= { vRtrIfBfdTable 1 } VRtrIfBfdEntry ::= SEQUENCE { vRtrIfBfdAdminState TmnxAdminState, vRtrIfBfdTransmitInterval Unsigned32, vRtrIfBfdReceiveInterval Unsigned32, vRtrIfBfdMultiplier Unsigned32, vRtrIfBfdEchoInterval Unsigned32, vRtrIfBfdType INTEGER } vRtrIfBfdAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of vRtrIfBfdAdminState specifies the admin state of BFD on this interface. When it is 'inService', BFD sessions can be established on this interface. When it is 'outOfService', they cannot. The vRtrIfBfdAdminState object is obsoleted and replaced with vRtrIfBfdExtAdminState object in 9.0 Release." ::= { vRtrIfBfdEntry 1 } vRtrIfBfdTransmitInterval OBJECT-TYPE SYNTAX Unsigned32 (10..100000) UNITS "milliseconds" MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of vRtrIfBfdTransmitInterval specifies the BFD transmit interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds. The vRtrIfBfdTransmitInterval object is obsoleted and replaced with vRtrIfBfdExtTransmitInterval object in 9.0 Release." DEFVAL { 100 } ::= { vRtrIfBfdEntry 2 } vRtrIfBfdReceiveInterval OBJECT-TYPE SYNTAX Unsigned32 (10..100000) UNITS "milliseconds" MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of vRtrIfBfdReceiveInterval specifies the BFD receive interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds. The vRtrIfBfdReceiveInterval object is obsoleted and replaced with vRtrIfBfdExtReceiveInterval object in 9.0 Release." DEFVAL { 100 } ::= { vRtrIfBfdEntry 3 } vRtrIfBfdMultiplier OBJECT-TYPE SYNTAX Unsigned32 (3..20) MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of vRtrIfBfdMultiplier specifies the the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault. The vRtrIfBfdMultiplier object is obsoleted and replaced with vRtrIfBfdExtMultiplier object in 9.0 Release." DEFVAL { 3 } ::= { vRtrIfBfdEntry 4 } vRtrIfBfdEchoInterval OBJECT-TYPE SYNTAX Unsigned32 (0|100..100000) UNITS "milliseconds" MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of vRtrIfBfdEchoInterval specifies the BFD echo interval over this interface. The vRtrIfBfdEchoInterval object is obsoleted and replaced with vRtrIfBfdExtEchoInterval object in 9.0 Release." DEFVAL { 0 } ::= { vRtrIfBfdEntry 5 } vRtrIfBfdType OBJECT-TYPE SYNTAX INTEGER { cpmNp(1), auto(2), iomHw(3) } MAX-ACCESS read-write STATUS obsolete DESCRIPTION "The value of vRtrIfBfdType specifies the configured termination of a BFD session on this interface. 'cpmNp(1)' specifies termination on the CPM card's Network Processor. 'auto(2)' specifies a system-selected termination other than the CPM Network Processor. The vRtrIfBfdType object is obsoleted and replaced with vRtrIfBfdExtType object in 9.0 Release." DEFVAL { auto } ::= { vRtrIfBfdEntry 6 } -- -- Virtual Router BFD session table -- vRtrIfBfdSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfBfdSessionEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The vRtrIfBfdSessionTable table contains per BFD session statistics and operational settings." ::= { tmnxVRtrObjs 34 } vRtrIfBfdSessionEntry OBJECT-TYPE SYNTAX VRtrIfBfdSessionEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Each row entry represents a BFD session. Entries are created automatically by the system, or when a static-route is configured to use BFD." INDEX { vRtrID, vRtrIfIndex, vRtrIfBfdSessionLclAddrType, vRtrIfBfdSessionLclAddr, vRtrIfBfdSessionRemAddrType, vRtrIfBfdSessionRemAddr } ::= { vRtrIfBfdSessionTable 1 } VRtrIfBfdSessionEntry ::= SEQUENCE { vRtrIfBfdSessionLclAddrType InetAddressType, vRtrIfBfdSessionLclAddr InetAddress, vRtrIfBfdSessionRemAddrType InetAddressType, vRtrIfBfdSessionRemAddr InetAddress, vRtrIfBfdSessionOperState TmnxOperState, vRtrIfBfdSessionState INTEGER, vRtrIfBfdSessionOperFlags BITS, vRtrIfBfdSessionMesgRecv Counter32, vRtrIfBfdSessionMesgSent Counter32, vRtrIfBfdSessionLastDownTime TimeStamp, vRtrIfBfdSessionLastUpTime TimeStamp, vRtrIfBfdSessionUpCount Counter32, vRtrIfBfdSessionDownCount Counter32, vRtrIfBfdSessionLclDisc Unsigned32, vRtrIfBfdSessionRemDisc Unsigned32, vRtrIfBfdSessionProtocols BITS, vRtrIfBfdSessionTxInterval Unsigned32, vRtrIfBfdSessionRxInterval Unsigned32, vRtrIfBfdSessionType INTEGER, vRtrIfBfdSessionVerMismatch Counter32, vRtrIfBfdSessionTimeSinceLastRx Unsigned32, vRtrIfBfdSessionTimeSinceLastTx Unsigned32 } vRtrIfBfdSessionLclAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionLclAddrType indicates the address type in vRtrIfBfdSessionLclAddr." ::= { vRtrIfBfdSessionEntry 1 } vRtrIfBfdSessionLclAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16|20)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionLclAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionLclAddrType." ::= { vRtrIfBfdSessionEntry 2 } vRtrIfBfdSessionRemAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionRemAddrType indicates the address type in vRtrIfBfdSessionRemAddr." ::= { vRtrIfBfdSessionEntry 3 } vRtrIfBfdSessionRemAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16|20)) MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionRemAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessionRemAddrType." ::= { vRtrIfBfdSessionEntry 4 } vRtrIfBfdSessionOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionOperState indicates the operational state of BFD on this interface." ::= { vRtrIfBfdSessionEntry 5 } vRtrIfBfdSessionState OBJECT-TYPE SYNTAX INTEGER { adminDown (0), --Session is administratively down down (1), --Session is down init (2), --Session is initializing up (3) --Session is up } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionState indicates the state of the BFD protocol on this interface." ::= { vRtrIfBfdSessionEntry 6 } vRtrIfBfdSessionOperFlags OBJECT-TYPE SYNTAX BITS { noProtocols (0), noHeartBeat (1), echoFailed (2), nbrSignalDown (3), fwdPlaneReset (4), pathDown (5), nbrAdminDown (6), adminClear (7) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionOperFlags indicates the reasons why a BFD session is not up." ::= { vRtrIfBfdSessionEntry 7 } vRtrIfBfdSessionMesgRecv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionMesgRecv indicates the number of messages received in this session. This object is applicable if vRtrIfBfdSessionType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned." ::= { vRtrIfBfdSessionEntry 8 } vRtrIfBfdSessionMesgSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionMesgSent indicates the number of messages sent in this session. This object is applicable if vRtrIfBfdSessionType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned." ::= { vRtrIfBfdSessionEntry 9 } vRtrIfBfdSessionLastDownTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionLastDownTime indicates the system time when this session last went down." ::= { vRtrIfBfdSessionEntry 10 } vRtrIfBfdSessionLastUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionLastUpTime indicates the system time when this session last came up." ::= { vRtrIfBfdSessionEntry 11 } vRtrIfBfdSessionUpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionUpCount indicates the number of times vRtrIfBfdSessionOperState changed from 'outOfService' to 'inService'." ::= { vRtrIfBfdSessionEntry 12 } vRtrIfBfdSessionDownCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionDownCount indicates the number of times vRtrIfBfdSessionOperState changed from 'inService' to 'outOfService'." ::= { vRtrIfBfdSessionEntry 13 } vRtrIfBfdSessionLclDisc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionLclDisc indicates the unique local discriminator for this session." ::= { vRtrIfBfdSessionEntry 14 } vRtrIfBfdSessionRemDisc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionRemDisc indicates the remote discriminator for this session." ::= { vRtrIfBfdSessionEntry 15 } vRtrIfBfdSessionProtocols OBJECT-TYPE SYNTAX BITS { ospfv2 (0), pim (1), isis (2), staticRoute (3), mcRing (4), rsvp (5), bgp (6), vrrp (7), srrp (8), mcep (9), ldp (10), ipsecTunnel(11), ospfv3 (12), mcIpsec (13), mcMobile (14), mplsTp (15), lag (16) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionProtocols indicates which protocols are using this BFD session." ::= { vRtrIfBfdSessionEntry 16 } vRtrIfBfdSessionTxInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionTxInterval indicates the negotiated transmit interval. This value is the minimum of the local node's 'vRtrIfBfdExtTransmitInterval' and the remote node's receive interval." ::= { vRtrIfBfdSessionEntry 17 } vRtrIfBfdSessionRxInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionRxInterval indicates the negotiated receive interval. This value is the minimum of the local node's 'vRtrIfBfdExtReceiveInterval' and the remote node's transmit interval." ::= { vRtrIfBfdSessionEntry 18 } vRtrIfBfdSessionType OBJECT-TYPE SYNTAX INTEGER { iom (1), cpm (2), cpmNp (3), iomHw(4) } MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionType indicates the termination of the BFD session, as follows: 'iom (1)' - termination on the IOM card main processor, 'cpm (2)' - termination on the CPM card main processor, 'cpmNp (3)' - termination on the CPM card Network Processor." ::= { vRtrIfBfdSessionEntry 19 } vRtrIfBfdSessionVerMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionVerMismatch indicates the number of version mismatch errors for the bfd session." ::= { vRtrIfBfdSessionEntry 20 } vRtrIfBfdSessionTimeSinceLastRx OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionTimeSinceLastRx indicates the number of milliseconds elapsed since the most recent message was received on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessionType equal to 'cpmNp(3)'. Otherwise, zero is returned." ::= { vRtrIfBfdSessionEntry 21 } vRtrIfBfdSessionTimeSinceLastTx OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfBfdSessionTimeSinceLastTx indicates the number of milliseconds elapsed since the most recent message was transmitted on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessionType equal to 'cpmNp(3)'. Otherwise, zero is returned." ::= { vRtrIfBfdSessionEntry 22 } -- -- Alcatel-Lucent SROS series Virtual Router Interface Proxy ARP Table -- -- Augmentation of the vRtrIfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrIfTable, and the augmenting table, -- vRtrIfProxyArpTable. This in effect extends the vRtrIfTable with -- additional columns. Creation (or deletion) of a row in the -- vRtrIfTable results in the same fate for the row in the -- vRtrIfProxyArpTable. -- vRtrIfProxyArpTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfProxyArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfProxyArpTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system." ::= { tmnxVRtrObjs 18 } vRtrIfProxyArpEntry OBJECT-TYPE SYNTAX VRtrIfProxyArpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to Proxy ARP for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrIfEntry } ::= { vRtrIfProxyArpTable 1 } VRtrIfProxyArpEntry ::= SEQUENCE { vRtrIfProxyArp TruthValue, vRtrIfProxyArpLocal TruthValue, vRtrIfProxyArpPolicy1 TPolicyStatementNameOrEmpty, vRtrIfProxyArpPolicy2 TPolicyStatementNameOrEmpty, vRtrIfProxyArpPolicy3 TPolicyStatementNameOrEmpty, vRtrIfProxyArpPolicy4 TPolicyStatementNameOrEmpty, vRtrIfProxyArpPolicy5 TPolicyStatementNameOrEmpty } vRtrIfProxyArp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrIfProxyArp is set to 'true', proxy ARP is enabled on this interface. If this value is 'false', proxy ARP is disabled on the interface." DEFVAL { false } ::= { vRtrIfProxyArpEntry 1 } vRtrIfProxyArpLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrIfProxyArpLocal is set to 'true', local proxy ARP is enabled, that is, the interface will reply to ARP requests even if both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyArpLocal is set to 'false', the interface will not reply to ARP requests if both the hosts are on the same subnet." DEFVAL { false } ::= { vRtrIfProxyArpEntry 2 } vRtrIfProxyArpPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyArpPolicy1 is used to specify the first proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy1 has no effect if vRtrIfProxyArp is set to 'false'." DEFVAL { ''H } -- the empty string ::= { vRtrIfProxyArpEntry 3 } vRtrIfProxyArpPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyArpPolicy2 is used to specify the second proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy2 has no effect if vRtrIfProxyArp is set to 'false'." DEFVAL { ''H } -- the empty string ::= { vRtrIfProxyArpEntry 4 } vRtrIfProxyArpPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyArpPolicy3 is used to specify the third proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy3 has no effect if vRtrIfProxyArp is set to 'false'." DEFVAL { ''H } -- the empty string ::= { vRtrIfProxyArpEntry 5 } vRtrIfProxyArpPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyArpPolicy4 is used to specify the fourth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy4 has no effect if vRtrIfProxyArp is set to 'false'." DEFVAL { ''H } -- the empty string ::= { vRtrIfProxyArpEntry 6 } vRtrIfProxyArpPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyArpPolicy5 is used to specify the fifth proxy ARP policy for this interface. This policy determines networks and sources for which proxy ARP will be attempted. If this value is set to an empty string, ''H, the interface does not have a proxy ARP policy associated with it. The value of vRtrIfProxyArpPolicy5 has no effect if vRtrIfProxyArp is set to 'false'." DEFVAL { ''H } -- the empty string ::= { vRtrIfProxyArpEntry 7 } -- -- Alcatel-Lucent SROS series Virtual Router Interface DHCP Relay Table -- -- Augmentation of the vRtrIfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrIfTable, and the augmenting table, -- vRtrIfDHCPTable. This in effect extends the vRtrIfTable with -- additional columns. Creation (or deletion) of a row in the -- vRtrIfTable results in the same fate for the row in the -- vRtrIfDHCPTable. -- vRtrIfDHCPTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfDHCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfDHCPTable is used to configure the interface parameters for the DHCP Relay agent." ::= { tmnxVRtrObjs 19 } vRtrIfDHCPEntry OBJECT-TYPE SYNTAX VRtrIfDHCPEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to DHCP Relay for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrIfEntry } ::= { vRtrIfDHCPTable 1 } VRtrIfDHCPEntry ::= SEQUENCE { vRtrIfDHCPRelayInfoOption TruthValue, vRtrIfDHCPRelayInfoAction INTEGER, vRtrIfDHCPRelayCircuitId INTEGER, vRtrIfDHCPRelayRemoteId INTEGER, vRtrIfDHCPAutoFilter Unsigned32, vRtrIfDHCPRelayServer1 IpAddress, vRtrIfDHCPRelayServer2 IpAddress, vRtrIfDHCPRelayServer3 IpAddress, vRtrIfDHCPRelayServer4 IpAddress, vRtrIfDHCPRelayServer5 IpAddress, vRtrIfDHCPRelayServer6 IpAddress, vRtrIfDHCPRelayServer7 IpAddress, vRtrIfDHCPRelayServer8 IpAddress, vRtrIfDHCPRelayTrusted TruthValue, vRtrIfDHCPAdminState TmnxAdminState, vRtrIfDHCPSnooping INTEGER, vRtrIfDHCPDescription TItemDescription, vRtrIfDHCPAutoFilterId TFilterID, vRtrIfDHCPOperAutoFilter Unsigned32, vRtrIfDHCPAuthPolicy TPolicyStatementNameOrEmpty, vRtrIfDHCPLeasePopulate Unsigned32, vRtrIfDHCPOperLeasePopulate Unsigned32, vRtrIfDHCPGiAddressType InetAddressType, vRtrIfDHCPGiAddress InetAddress, vRtrIfDHCPGiAddressAsSrc TruthValue, vRtrIfDHCPMatchOption82 TruthValue, vRtrIfDHCPRelayRemoteIdStr DisplayString, vRtrIfDHCPProxyAdminState TmnxAdminState, vRtrIfDHCPProxyServerAddr IpAddress, vRtrIfDHCPProxyLeaseTime Unsigned32, vRtrIfDHCPProxyLTRadiusOverride TruthValue, vRtrIfDHCPVendorIncludeOptions BITS, vRtrIfDHCPVendorOptionString DisplayString, vRtrIfDHCPLayer2Header TruthValue, vRtrIfDHCPAntiSpoofMacAddr MacAddress, vRtrIfDHCPClientApplications BITS, vRtrIfDHCPRelayPlainBootp INTEGER, vRtrIfDHCPUserDb TNamedItemOrEmpty, vRtrIfDHCPUseArpForReply TruthValue, -- vRtrIfDHCPCopyOption82 TruthValue vRtrIfDHCPFilterId TDHCPFilterID } vRtrIfDHCPRelayInfoOption OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "vRtrIfDHCPRelayInfoOption is used to enable/disable DHCP Option 82. If the value of this object is set to 'false', DHCP Relay is disabled." DEFVAL { false } ::= { vRtrIfDHCPEntry 1 } vRtrIfDHCPRelayInfoAction OBJECT-TYPE SYNTAX INTEGER { replace (1), drop (2), keep (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayInfoAction is used to configure the DHCP Relay reforwarding policy. replace(1) - replace existing information with DHCP relay information drop(2) - discard messages with existing relay information if the option-82 information is also present. keep(3) - retain the existing relay information." DEFVAL { keep } ::= { vRtrIfDHCPEntry 2 } vRtrIfDHCPRelayCircuitId OBJECT-TYPE SYNTAX INTEGER { none (0), ifIndex (1), asciiTuple (2), sapId (3), vlanAsciiTuple (4) -- portId (5), -- ifName (6) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCPRelayCircuitId specifies whether or not the circuit-id suboption is present, and if it is present what information goes in it. If the value of this object is set to 'none', the circuit-id suboption will not be part of the information option (option 82). If the value of this object is set to 'ifIndex', the value of the interface index is used. If the value of this object is set to 'asciiTuple', the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') is used. If the value of this object is set to 'sapId', the ASCII-encoded SAP-id is used. If the value of this object is set to 'vlan-ascii-tuple' - the format will include VLAN-id and dot1p bits in addition to what is included in ascii-tuple already. The format is supported on dot1q and qinq encapsulated ports only. Thus, when the option 82 bits are stripped, dot1p bits will be copied to the Ethernet header of an outgoing packet. -- -- The value 'sapId(3)' can only be used if the interface is a service -- interface. -- The values 'portId(5)' and 'ifName(6)' can only be used if the -- interface is a network interface. " DEFVAL { asciiTuple } ::= { vRtrIfDHCPEntry 3 } vRtrIfDHCPRelayRemoteId OBJECT-TYPE SYNTAX INTEGER { mac (1), none (2), remote-id (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPRelayRemoteId specifies what information goes into the remote-id suboption in the DHCP Relay packet. If the value of this object is set to 'none', the remote-id suboption is left blank. If the value of this object is set to 'mac', the MAC address of the remote end is encoded in the suboption. If the value of the object is set to 'remote-id', vRtrIfDHCPRelayRemoteIdStr will be the remote-id." DEFVAL { none } ::= { vRtrIfDHCPEntry 4 } vRtrIfDHCPAutoFilter OBJECT-TYPE SYNTAX Unsigned32 (0..2000) MAX-ACCESS read-create STATUS obsolete DESCRIPTION "vRtrIfDHCPAutoFilter allows the router to automatically build anti-spoofing filter lists. When this object is set to a non-zero value, auto-filtering is enabled and a filter allowing only PPPoE or DHCP traffic is established on the interface. The non-zero value indicates the maximum number of entries that the auto-filter can have. These entries are created by the agent upon snooping a valid DHCP Reply packet and are used to allow traffic sourced by the given DHCP-assigned IP address." DEFVAL { 0 } ::= { vRtrIfDHCPEntry 5 } vRtrIfDHCPRelayServer1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer1 is used to configure the first DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } -- 0.0.0.0 ::= { vRtrIfDHCPEntry 6 } vRtrIfDHCPRelayServer2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer2 is used to configure the second DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 7 } vRtrIfDHCPRelayServer3 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer3 is used to configure the third DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 8 } vRtrIfDHCPRelayServer4 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer4 is used to configure the fourth DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 9 } vRtrIfDHCPRelayServer5 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer5 is used to configure the fifth DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 10 } vRtrIfDHCPRelayServer6 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer6 is used to configure the sixth DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 11 } vRtrIfDHCPRelayServer7 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer7 is used to configure the seventh DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 12 } vRtrIfDHCPRelayServer8 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPRelayServer8 is used to configure the eighth DHCP server where the requests will be forwarded." DEFVAL { '00000000'H } ::= { vRtrIfDHCPEntry 13 } vRtrIfDHCPRelayTrusted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When the value of vRtrIfDHCPRelayTrusted is set to 'true(1)', the router will relay requests where the DHCP giaddr is zero." DEFVAL { false } ::= { vRtrIfDHCPEntry 14 } vRtrIfDHCPAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrIfDHCPAdminState is used to configure the desired administrative state of DHCP on this interface. If the value of vRtrIfType is network this object can only be set to 'outOfService'." DEFVAL { outOfService } ::= { vRtrIfDHCPEntry 15 } vRtrIfDHCPSnooping OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS obsolete DESCRIPTION "vRtrIfDHCPSnooping is used to enable/disable snooping of DHCP packets received on interface." DEFVAL { disabled } ::= { vRtrIfDHCPEntry 16 } vRtrIfDHCPDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPDescription is a user provided description string for DHCP on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } -- the empty string ::= { vRtrIfDHCPEntry 17 } vRtrIfDHCPAutoFilterId OBJECT-TYPE SYNTAX TFilterID MAX-ACCESS read-only STATUS obsolete DESCRIPTION "vRtrIfDHCPAutoFilterId maintains the auto-filter identifier being used for this interface." ::= { vRtrIfDHCPEntry 18 } vRtrIfDHCPOperAutoFilter OBJECT-TYPE SYNTAX Unsigned32 (0..2000) MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of vRtrIfDHCPOperAutoFilter indicates the number of active auto-filter entries per interface. These entries are created in the TIMETRA-FILTER-MIB::tIPFilterTable by the agent by snooping valid 'DHCP ACK' messages." DEFVAL { 0 } ::= { vRtrIfDHCPEntry 19 } vRtrIfDHCPAuthPolicy OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "Defines which subscriber authentication policy must be applied when a subscriber message (e.g. DHCP, PPPoE, ...) is received on the interface. The authentication policy must be defined in tmnxSubAuthPlcyTable." DEFVAL { ''H } ::= { vRtrIfDHCPEntry 20 } vRtrIfDHCPLeasePopulate OBJECT-TYPE SYNTAX Unsigned32 (0..32767) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCPLeasePopulate specifies the maximum number of DHCP lease states allowed on this interface." DEFVAL { 0 } ::= { vRtrIfDHCPEntry 21 } vRtrIfDHCPOperLeasePopulate OBJECT-TYPE SYNTAX Unsigned32 (0..32767) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCPOperLeasePopulate indicates the maximum number of DHCP lease states allocated on this interface." ::= { vRtrIfDHCPEntry 22 } vRtrIfDHCPGiAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPGiAddressType specifies the type of vRtrIfDHCPGiAddress, the gateway interface address." DEFVAL { unknown } ::= { vRtrIfDHCPEntry 23 } vRtrIfDHCPGiAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPGiAddress specifies the gateway interface address. The type of this address is specified by the value of vRtrIfDHCPGiAddressType." DEFVAL { ''H } ::= { vRtrIfDHCPEntry 24 } vRtrIfDHCPGiAddressAsSrc OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPGiAddressAsSrc specifies whether the DHCP relay should use the gateway interface address as the source IP address when communicating with the DHCP server. When it is set to 'true(1)', the source IP address used to communicate with the DHCP server is the gateway interface address. When it is 'false', the source IP is the IP of the egress interface the IP packet goes out on." DEFVAL { false } ::= { vRtrIfDHCPEntry 25 } vRtrIfDHCPMatchOption82 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPMatchOption82 specifies whether the DHCP relay should use the circuit ID in the option 82 field in DHCP packets to match DHCP messages. When it is set to 'true(1)', the option 82 circuit ID is used in addition to the MAC address and transaction ID. When it is set to 'false', only the MAC address and transaction ID are used." DEFVAL { false } ::= { vRtrIfDHCPEntry 26 } vRtrIfDHCPRelayRemoteIdStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPRelayRemoteIdStr specifies the remote-id in the DHCP Relay packet if value of vRtrIfDHCPRelayRemoteId is set to 'remote-id'." DEFVAL { "" } ::= { vRtrIfDHCPEntry 27 } vRtrIfDHCPProxyAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPProxyAdminState specifies the desired administrative state of the proxy server on this interface. When it is set to 'inService', the proxy server is enabled only if vRtrIfDHCPAdminState is also set to 'inService'." DEFVAL { outOfService } ::= { vRtrIfDHCPEntry 28 } vRtrIfDHCPProxyServerAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPProxyServerAddr specifies the IP address which will be used as the source address of the emulated DHCP server. If this IP address is not configured, the value of vRiaIpAddress will be used as the source address of the emulated DHCP server." DEFVAL { '00000000'H } -- 0.0.0.0 means not-set ::= { vRtrIfDHCPEntry 29 } vRtrIfDHCPProxyLeaseTime OBJECT-TYPE SYNTAX Unsigned32 (0|300..315446399) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPProxyLeaseTime specifies in seconds how long a DHCP client is allowed to use the offered IP address. Value 0 means the lease time provided by a RADIUS or an upstream DHCP server will not be overridden. A lease time of 7 days is used when RADIUS does not provide a lease time." DEFVAL { 0 } ::= { vRtrIfDHCPEntry 30 } vRtrIfDHCPProxyLTRadiusOverride OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPProxyLTRadiusOverride specifies whether or not the lease time provided by the RADIUS server is presented to the DHCP client. By default the proxy-server will always make use of vRtrIfDHCPProxyLeaseTime, regardless of what lease time information is provided from the RADIUS server. When vRtrIfDHCPProxyLTRadiusOverride is set to 'true(1)', the proxy-server will use the lease time information provided by the RADIUS server, regardless of the configured one." DEFVAL { false } ::= { vRtrIfDHCPEntry 31 } vRtrIfDHCPVendorIncludeOptions OBJECT-TYPE SYNTAX BITS { systemId (0), clientMac (1), serviceId (2), sapId (3), poolName (4) -- portId (5), -- ifName (6) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPVendorIncludeOptions specifies what is encoded in the Alcatel-Lucent vendor specific sub-option of option 82. -- The values 'serviceId(2)' and 'sapId(3)' can only be used if the -- interface is a service interface. -- The values 'portId(5)' and 'ifName(6)' can only be used if the -- interface is a network interface. -- The value of this object is only used when vRtrIfDHCPRelayInfoAction is 'replace(1)'." DEFVAL { '0'H } ::= { vRtrIfDHCPEntry 32 } vRtrIfDHCPVendorOptionString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPVendorOptionString specifies the string that goes into the Alcatel-Lucent vendor specific sub-option of option 82. This string is only used when vRtrIfDHCPRelayInfoAction is set to 'replace(1)'." DEFVAL { "" } ::= { vRtrIfDHCPEntry 33 } vRtrIfDHCPLayer2Header OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPLayer2Header specificies, together with the value of object vRtrIfDHCPAntiSpoofMacAddr, the MAC address that is used in anti-spoof entries for the lease states on this interface. When it is set to 'false (2)', the client hardware address from the DHCP payload, stored in TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When it is set to 'true (1)', the behavior depends on the value of vRtrIfDHCPAntiSpoofMacAddr. If vRtrIfDHCPAntiSpoofMacAddr is set to all zeros, the source MAC address in the L2 header of the DHCP packet is used. If vRtrIfDHCPAntiSpoofMacAddr is configured, then its value is used. Only if the corresponding row in the vRtrIfTable has the value of the object vRtrIfType equal to 'serviceIesGroup', it is allowed to set the value of vRtrIfDHCPLayer2Header to 'true'." DEFVAL { false } ::= { vRtrIfDHCPEntry 34 } vRtrIfDHCPAntiSpoofMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPAntiSpoofMacAddr specifies, together with the value of object vRtrIfDHCPLayer2Header, the MAC address that is used in anti-spoof entries for the lease states on this interface. When vRtrIfDHCPLayer2Header is 'false (2)', the client hardware address from the DHCP payload, stored in TIMETRA-SERV-MIB::svcDhcpLseStateChAddr, is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is all zeros, the source MAC address in the L2 header of the DHCP packet is used. When vRtrIfDHCPLayer2Header is 'true (1)' and the value of this object is not all zeros, then this value is used. This object can only be configured if the value of object vRtrIfDHCPLayer2Header is set to 'true (1)'." DEFVAL { '000000000000'H } ::= { vRtrIfDHCPEntry 35 } vRtrIfDHCPClientApplications OBJECT-TYPE SYNTAX BITS { dhcp (0), ppp (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPClientApplications specifies the set of client applications that can make use of the DHCP relay functionality on this interface." DEFVAL { { dhcp } } ::= { vRtrIfDHCPEntry 36 } vRtrIfDHCPRelayPlainBootp OBJECT-TYPE SYNTAX INTEGER { enabled(1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPRelayPlainBootp specifies whether plain bootp messages will be relayed. If set to 'disabled', the system will consider plain bootp packets as malformed DHCP packets and hence will not relay these messages." DEFVAL { disabled } ::= { vRtrIfDHCPEntry 37 } vRtrIfDHCPUserDb OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPUserDb specifies the local user database to authenticate against. If no authentication with the local user database is required, the value of this object must be set to the empty string." DEFVAL { "" } ::= { vRtrIfDHCPEntry 38 } vRtrIfDHCPUseArpForReply OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPUseArpForReply specifies, how the system determines the Hw address for outgoing IP packets. If set to 'false', the DHCP CHADDR (Client Hardware Address) is used. If set to 'true' the CHADDR is ignored, and ARP is used to determine the Hw address. Is set to TRUE, the system will accept all DHCP messages with CHADDR set to 00:00:00:00:00:00. This option only has effect on ethernet interfaces." DEFVAL { false } ::= { vRtrIfDHCPEntry 39 } vRtrIfDHCPFilterId OBJECT-TYPE SYNTAX TDHCPFilterID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCPFilterId specifies the DHCP filter to apply. If no filtering is required, the value of this object must be set to 0." DEFVAL { 0 } ::= { vRtrIfDHCPEntry 40 } --vRtrIfDHCPCopyOption82 OBJECT-TYPE -- SYNTAX TruthValue -- MAX-ACCESS read-create -- STATUS current -- DESCRIPTION "The value of the object vRtrIfDHCPCopyOption82 specifies -- whether the content of option82 will be copied to option43 -- when the option82 field is stripped." -- DEFVAL { false } -- ::= { vRtrIfDHCPEntry 40 } -- -- DHCP Relay Statistics Table -- vRtrIfDHCPRelayStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfDHCPRelayStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfDHCPRelayStatsTable contains the statistics for the DHCP Relay agent." ::= { tmnxVRtrObjs 20 } vRtrIfDHCPRelayStatsEntry OBJECT-TYPE SYNTAX VRtrIfDHCPRelayStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to DHCP Relay statistics for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrIfEntry } ::= { vRtrIfDHCPRelayStatsTable 1 } VRtrIfDHCPRelayStatsEntry ::= SEQUENCE { vRtrIfDHCPRelayRxPkts Counter32, vRtrIfDHCPRelayTxPkts Counter32, vRtrIfDHCPRelayRxMalformedPkts Counter32, vRtrIfDHCPRelayRxUntrustedPkts Counter32, vRtrIfDHCPRelayClientPktsDiscarded Counter32, vRtrIfDHCPRelayClientPktsRelayed Counter32, vRtrIfDHCPRelayServerPktsDiscarded Counter32, vRtrIfDHCPRelayServerPktsRelayed Counter32, vRtrIfDHCPRelayAuthPktsDiscarded Counter32, vRtrIfDHCPRelayAuthPktsSuccess Counter32, vRtrIfDHCPRelayClientPktsSnooped Counter32, vRtrIfDHCPRelayServerPktsSnooped Counter32, vRtrIfDHCPRelayClientPktsProxRad Counter32, vRtrIfDHCPRelayClientPktsProxLS Counter32, vRtrIfDHCPRelayPktsGenRelease Counter32, vRtrIfDHCPRelayPktsGenForceRenew Counter32 } vRtrIfDHCPRelayRxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayRxPkts indicates the total number of packets received by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 1 } vRtrIfDHCPRelayTxPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayTxPkts indicates the total number of packets transmitted by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 2 } vRtrIfDHCPRelayRxMalformedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayRxMalformedPkts indicates the total number of malformed packets received by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 3 } vRtrIfDHCPRelayRxUntrustedPkts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayRxUntrustedPkts indicates the total number of untrusted packets received by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 4 } vRtrIfDHCPRelayClientPktsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayClientPktsDiscarded indicates the total number of client packets dicarded by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 5 } vRtrIfDHCPRelayClientPktsRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayClientPktsRelayed indicates the total number of client packets relayed by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 6 } vRtrIfDHCPRelayServerPktsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayServerPktsDiscarded indicates the total number of server packets discarded by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 7 } vRtrIfDHCPRelayServerPktsRelayed OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayServerPktsRelayed indicates the total number of server packets relayed by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 8 } vRtrIfDHCPRelayAuthPktsDiscarded OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayAuthPktsDiscarded indicates the total number of packets discarded because authentication was not successful." ::= { vRtrIfDHCPRelayStatsEntry 9 } vRtrIfDHCPRelayAuthPktsSuccess OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayAuthPktsSuccess indicates the total number of packets for which authentication was successful." ::= { vRtrIfDHCPRelayStatsEntry 10 } vRtrIfDHCPRelayClientPktsSnooped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayClientPktsSnooped indicates the total number of client packets snooped by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 11 } vRtrIfDHCPRelayServerPktsSnooped OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayServerPktsSnooped indicates the total number of server packets snooped by the DHCP relay agent." ::= { vRtrIfDHCPRelayStatsEntry 12 } vRtrIfDHCPRelayClientPktsProxRad OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayClientPktsProxRad indicates the total number of client packets proxied by the DHCP relay agent based on data received from a RADIUS server." ::= { vRtrIfDHCPRelayStatsEntry 13 } vRtrIfDHCPRelayClientPktsProxLS OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayClientPktsProxLS indicates the total number of client packets proxied by the DHCP relay agent based on a lease state. The lease itself can have been obtained from a DHCP or RADIUS server. This is the so called lease split functionality." ::= { vRtrIfDHCPRelayStatsEntry 14 } vRtrIfDHCPRelayPktsGenRelease OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayPktsGenRelease indicates the total number of DHCP RELEASE messages spoofed by the DHCP relay agent to the DHCP server." ::= { vRtrIfDHCPRelayStatsEntry 15 } vRtrIfDHCPRelayPktsGenForceRenew OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrIfDHCPRelayPktsGenForceRenew indicates the total number of DHCP FORCERENEW messages spoofed by the DHCP relay agent to the DHCP clients." ::= { vRtrIfDHCPRelayStatsEntry 16 } -- -- Virtual Router Interface DHCP Lease State Table -- vRtrIfDHCPLeaseStateTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfDHCPLeaseStateEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "vRtrIfDHCPLeaseStateTable contains DHCP lease state info for a virtual router interface in the system. The content of this table is moved to the TIMETRA-SERV-MIB::svcDhcpLeaseStateTable." ::= { tmnxVRtrObjs 22 } vRtrIfDHCPLeaseStateEntry OBJECT-TYPE SYNTAX VRtrIfDHCPLeaseStateEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "DHCP lease state information for a virtual router interface." INDEX { vRtrID, vRtrIfIndex, vRtrIfDHCPLseStateCiAddr } ::= { vRtrIfDHCPLeaseStateTable 1 } VRtrIfDHCPLeaseStateEntry ::= SEQUENCE { vRtrIfDHCPLseStateCiAddr IpAddress, vRtrIfDHCPLseStateChAddr MacAddress, vRtrIfDHCPLseStateRemainLseTime Unsigned32, vRtrIfDHCPLseStateOption82 OCTET STRING, vRtrIfDHCPLseStatePersistKey Unsigned32 } vRtrIfDHCPLseStateCiAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The value of the object vRtrIfDHCPLseStateCiAddr indicates the IP address of the DHCP lease state." ::= { vRtrIfDHCPLeaseStateEntry 1 } vRtrIfDHCPLseStateChAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object vRtrIfDHCPLseStateChAddr indicates the MAC address of the DHCP lease state." ::= { vRtrIfDHCPLeaseStateEntry 2 } vRtrIfDHCPLseStateRemainLseTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object vRtrIfDHCPLseStateRemainLseTime indicates the remaining lease time of the IP address of the DHCP lease state." ::= { vRtrIfDHCPLeaseStateEntry 3 } vRtrIfDHCPLseStateOption82 OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS obsolete DESCRIPTION "vRtrIfDHCPLseStateOption82 indicates the content of the Option82 for this DHCP lease state." ::= { vRtrIfDHCPLeaseStateEntry 4 } vRtrIfDHCPLseStatePersistKey OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS obsolete DESCRIPTION "The value of the object vRtrIfDHCPLseStatePersistKey indicates a key value that can be used to track this lease state in the persistence file." ::= { vRtrIfDHCPLeaseStateEntry 5 } -- -- Alcatel-Lucent SROS series Virtual Router Interface IPv6 DHCP Relay Table -- -- Augmentation of the vRtrIfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrIfTable, and the augmenting table, -- vRtrIfDHCP6Table. This in effect extends the vRtrIfTable with -- additional columns. Creation (or deletion) of a row in the -- vRtrIfTable results in the same fate for the row in the -- vRtrIfDHCP6Table. -- vRtrIfDHCP6TableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6TableLastChanged indicates the time of the last change to any row of vRtrIfDHCP6Table" ::= { tmnxVRtrObjs 35 } vRtrIfDHCP6Table OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfDHCP6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfDHCP6Table is used to configure the interface parameters for DHCP6." ::= { tmnxVRtrObjs 36 } vRtrIfDHCP6Entry OBJECT-TYPE SYNTAX VRtrIfDHCP6Entry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to DHCP6 for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrIfEntry } ::= { vRtrIfDHCP6Table 1 } VRtrIfDHCP6Entry ::= SEQUENCE { vRtrIfDHCP6LastChanged TimeStamp, vRtrIfDHCP6AdminState TmnxAdminState, vRtrIfDHCP6OperState INTEGER, vRtrIfDHCP6Description TItemDescription, vRtrIfDHCP6RelayServer1 InetAddressIPv6z, vRtrIfDHCP6RelayServer2 InetAddressIPv6z, vRtrIfDHCP6RelayServer3 InetAddressIPv6z, vRtrIfDHCP6RelayServer4 InetAddressIPv6z, vRtrIfDHCP6RelayServer5 InetAddressIPv6z, vRtrIfDHCP6RelayServer6 InetAddressIPv6z, vRtrIfDHCP6RelayServer7 InetAddressIPv6z, vRtrIfDHCP6RelayServer8 InetAddressIPv6z, vRtrIfDHCP6RelayItfIdOption INTEGER, vRtrIfDHCP6LeasePopulate Unsigned32, vRtrIfDHCP6CurrLeasePopulate Unsigned32, vRtrIfDHCP6SourceAddress InetAddressIPv6, vRtrIfDHCP6EnableNgbrResolution TruthValue, vRtrIfDHCP6RemoteIdOption TruthValue, vRtrIfDHCP6PfxdAdminState INTEGER, vRtrIfDHCP6ServerMaxLeaseStates Unsigned32, vRtrIfDHCP6CurrServerLeaseStates Unsigned32, vRtrIfDHCP6ItfIdString DisplayString, vRtrIfDHCP6ProxyAdminState TmnxAdminState, vRtrIfDHCP6ProxyRenewTimer Unsigned32, vRtrIfDHCP6ProxyRebindTimer Unsigned32, vRtrIfDHCP6ProxyValidLifetime Unsigned32, vRtrIfDHCP6ProxyPrefLifetime Unsigned32, vRtrIfDHCP6ProxyApplications BITS, vRtrIfDHCP6UserDb TNamedItemOrEmpty, vRtrIfDHCP6LocalDhcpServerName TNamedItemOrEmpty, vRtrIfDHCP6RelayApplications BITS, vRtrIfDHCP6LinkAddress InetAddressIPv6 } vRtrIfDHCP6LastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6LastChanged indicates the time of the last change to this row of VRtrIfDHCP6Entry." ::= { vRtrIfDHCP6Entry 1 } vRtrIfDHCP6AdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6AdminState specifies the desired administrative status of the DHCP6 relay agent on this interface. The value can only be set to inService if the value of vRtrIfType is serviceIesGroup. The value noop(3) is never allowed." DEFVAL { outOfService } ::= { vRtrIfDHCP6Entry 2 } vRtrIfDHCP6OperState OBJECT-TYPE SYNTAX INTEGER { up (1), down (2), noIPv6Pfx (3), noServerConfigured (4), noValidSourceAddr (5) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6OperState indicates the current operational state of the DHCP6 relay agent on this interface. Following value are possible: up (1) - the DHCP6 relay agent is running. down (2), - the DHCP6 relay agent is administratively disabled. noIPv6Pfx (3), - the DHCP6 relay agent cannot be operational as no ipv6 prefix is assigned to this link. noServerConfigured(4) - the DHCP6 relay agent cannot be operational as no DHCP6 servers are configured. noValidSourceAddr(5) - the DHCP6 relay agent cannot be operational because a source address has been configured and the address is not local to this node." ::= { vRtrIfDHCP6Entry 3 } vRtrIfDHCP6Description OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6Description specifies a user provided description string for DHCP6 relay agent on this virtual router interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } -- the empty string ::= { vRtrIfDHCP6Entry 4 } vRtrIfDHCP6RelayServer1 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer1 specifies the first DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 5 } vRtrIfDHCP6RelayServer2 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer2 specifies the 2nd DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 6 } vRtrIfDHCP6RelayServer3 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer3 specifies the 3rd DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 7 } vRtrIfDHCP6RelayServer4 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer4 specifies the 4rd DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 8 } vRtrIfDHCP6RelayServer5 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer5 specifies the 5th DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 9 } vRtrIfDHCP6RelayServer6 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer6 specifies the 6th DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 10 } vRtrIfDHCP6RelayServer7 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer7 specifies the 7th DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 11 } vRtrIfDHCP6RelayServer8 OBJECT-TYPE SYNTAX InetAddressIPv6z MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayServer8 specifies the 8th DHCP6 server where the DHCP6 requests will be forwarded to." DEFVAL { '0000000000000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 12 } vRtrIfDHCP6RelayItfIdOption OBJECT-TYPE SYNTAX INTEGER { none (0), ifIndex (1), asciiTuple (2), sapId (3), string (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RelayItfIdOption specifies whether or not the interface-id option is added by the DHCP6 relay agent, and, if it is present, what information goes in it. If the value of this object is set to 'none', the option is not added by the relay agent. In all other cases the option is added to the relay message. The content of the option is defined as follows: - 'ifIndex' - the value of the interface index is used. - 'asciiTuple' - the ASCII-encoded concatenated tuple consisting of the - access-node-identifier - service-id - interface-name - SAP-id (only if the value of vRtrIfType is 'serviceIesGroup') - 'sapId' - the ASCII-encoded SAP-id is used. - 'string' - the value of the object vRtrIfDHCP6ItfIdString is used. If the value of vRtrIfType, associated with this interface, has a value of 'serviceIesGroup(7)' or 'serviceVprnGroup(9)', the value of the object vRtrIfDHCP6RelayItfIdOption may also be included in the RADIUS authentication request sent by the DHCPv6 proxy server." DEFVAL { none } ::= { vRtrIfDHCP6Entry 13 } vRtrIfDHCP6LeasePopulate OBJECT-TYPE SYNTAX Unsigned32 (0..8000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6LeasePopulate specifies the maximum number of lease states allocated by the DHCP6 relay function, allowed on this interface." DEFVAL { 0 } ::= { vRtrIfDHCP6Entry 14 } vRtrIfDHCP6CurrLeasePopulate OBJECT-TYPE SYNTAX Unsigned32 (0..8000) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6CurrLeasePopulate indicates the number of lease states currently allocated on this interface by the DHCP6 relay function." ::= { vRtrIfDHCP6Entry 15 } vRtrIfDHCP6SourceAddress OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6SourceAddress specifies the IPv6 address that will be used by the DHCP6 relay agent as source IP address in all messages sent to the DHCP6 servers. If set to ::, the system will use the IPv6 address assigned on the link on which the relay message is sent out, if such an address is defined. As a last resort the system IPv6 address is taken." DEFVAL { '00000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 16 } vRtrIfDHCP6EnableNgbrResolution OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6EnableNgbrResolution specifies whether or not neighbor resolution via DHCP6 Relay must be enabled on this interface. This feature is similar to the arp-populate feature in ipv4." DEFVAL { false } ::= { vRtrIfDHCP6Entry 17 } vRtrIfDHCP6RemoteIdOption OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6RemoteIdOption specifies whether or not the remote Id option is sent to the DHCP6 server. The client DUID is used as remoteId. If the value of vRtrIfType, associated with this interface, has a value of 'serviceIesGroup(7)' or 'serviceVprnGroup(9)', the value of the object vRtrIfDHCP6RemoteIdOption may also be included in the RADIUS authentication request sent by the DHCPv6 proxy server." DEFVAL { false } ::= { vRtrIfDHCP6Entry 18 } vRtrIfDHCP6PfxdAdminState OBJECT-TYPE SYNTAX INTEGER { enabled (1), disabled(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdAdminState specifies the administrative state of the row. If set to enabled, this IPv6 prefix will be delegated by the system." DEFVAL { disabled } ::= { vRtrIfDHCP6Entry 19 } vRtrIfDHCP6ServerMaxLeaseStates OBJECT-TYPE SYNTAX Unsigned32 (0..8000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6ServerMaxLeaseStates specifies the maximum number of lease states installed by the DHCP6 server function allowed on this interface." DEFVAL { 8000 } ::= { vRtrIfDHCP6Entry 20 } vRtrIfDHCP6CurrServerLeaseStates OBJECT-TYPE SYNTAX Unsigned32 (0..8000) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6CurrServerLeaseStates indicates the number of lease states currently allocated on this interface by the DHCP6 server function." ::= { vRtrIfDHCP6Entry 21 } vRtrIfDHCP6ItfIdString OBJECT-TYPE SYNTAX DisplayString (SIZE(0..80)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6ItfIdString specifies the string that will be put in the interface-id option added by the relay agent. This value is only meaningful if the object vRtrIfDHCP6RelayItfIdOption is set to string(4)." ::= { vRtrIfDHCP6Entry 22 } vRtrIfDHCP6ProxyAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCP6ProxyAdminState specifies the desired administrative state of the IPv6 Router Advertisements." DEFVAL { outOfService } ::= { vRtrIfDHCP6Entry 23 } vRtrIfDHCP6ProxyRenewTimer OBJECT-TYPE SYNTAX Unsigned32 (0..604800) -- max. 7 days UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCP6ProxyRenewTimer specifies the renew-timer (T1). The time at which the client contacts the server from which the addresses in the IA_NA or IA_PD were obtained to extend the lifetimes of the addresses or prefixes assigned to the client." DEFVAL { 1800 } -- 30 minutes ::= { vRtrIfDHCP6Entry 24 } vRtrIfDHCP6ProxyRebindTimer OBJECT-TYPE SYNTAX Unsigned32 (0..1209600) -- max. 14 days UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCP6ProxyRebindTimer specifies the rebind-timer (T2). The time at which the client contacts any available server to extend the lifetimes of the addresses or prefixes assigned to the client." DEFVAL { 2880 } -- 48 minutes ::= { vRtrIfDHCP6Entry 25 } vRtrIfDHCP6ProxyValidLifetime OBJECT-TYPE SYNTAX Unsigned32 (300..4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCP6ProxyValidLifetime specifies the valid lifetime for the IPv6 prefix or address in the option. A value of 0xFFFFFFFF represents infinity." DEFVAL { 86400 } -- 1 day ::= { vRtrIfDHCP6Entry 26 } vRtrIfDHCP6ProxyPrefLifetime OBJECT-TYPE SYNTAX Unsigned32 (300..4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCP6ProxyPrefLifetime specifies the preferred lifetime for the IPv6 prefix or address in the option. When preferred lifetime expires, then any derived addresses are deprecated. A value of 0xFFFFFFFF represents infinity." DEFVAL { 3600 } -- 1 hour ::= { vRtrIfDHCP6Entry 27 } vRtrIfDHCP6ProxyApplications OBJECT-TYPE SYNTAX BITS { dhcp (0), ppp (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCP6ProxyApplications specifies the set of client applications that can make use of the DHCP proxy functionality on this interface." DEFVAL { { dhcp } } ::= { vRtrIfDHCP6Entry 28 } vRtrIfDHCP6UserDb OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCP6UserDb specifies the local user database to authenticate against. If no authentication with the local user database is required, the value of this object must be set to the empty string." DEFVAL { "" } ::= { vRtrIfDHCP6Entry 29 } vRtrIfDHCP6LocalDhcpServerName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCP6LocalDhcpServerName specifies the local DHCP server that can be reached via this interface. The server itself is configured on virtual router level in object TIMETRA-DHCP-SERVER-MIB::tmnxDhcpServerCfgServerName. Assigning an ip-address to it is done here by linking it to an interface. A server can be linked to several interfaces on the same virtual router." DEFVAL { ''H } ::= { vRtrIfDHCP6Entry 30 } vRtrIfDHCP6RelayApplications OBJECT-TYPE SYNTAX BITS { dhcp (0), ppp (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfDHCP6RelayApplications specifies the set of client applications that can make use of the DHCP relay functionality on this interface. This object can only be set when the value of vRtrIfType, associated with this interface, has a value of 'serviceIesGroup(7)' or 'serviceVprnGroup(9)'." DEFVAL { { dhcp } } ::= { vRtrIfDHCP6Entry 31 } vRtrIfDHCP6LinkAddress OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6LinkAddress specifies the ipv6 address that will be used by the DHCP6 relay agent as link address in all messages sent to the DHCP6 servers. If set to ::, the system determines the link address based on the group interface configuration. This object can only be set when vRtrIfType is either 'serviceIesGroup(7)' or 'serviceVprnGroup(9)'." DEFVAL { '00000000000000000000000000000000'H } ::= { vRtrIfDHCP6Entry 32 } -- -- Alcatel-Lucent SROS series Virtual Router Interface Name to vRtrIfIndex Mapping -- Table -- vRtrIfNameTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a read-only table, each row of which represents a one to one equivalence between a router interface name (vRtrIfName) and its corresponding index in the vRtrIfTable (vRtrIfIndex)." ::= { tmnxVRtrObjs 5} vRtrIfNameEntry OBJECT-TYPE SYNTAX VRtrIfNameEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrIfNameTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table." INDEX { vRtrID, IMPLIED vRtrIfName } ::= { vRtrIfNameTable 1 } VRtrIfNameEntry ::= SEQUENCE { vRtrIfNameIndex InterfaceIndex } vRtrIfNameIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfNameIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface which has interface name as vRtrIfName. Every vRtrIfName is unique within a specific instance of vRtrID." ::= { vRtrIfNameEntry 1 } -- -- Virtual Router IP Address Table -- vRtrIpAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIpAddrTable has an entry for each IP address configured for a virtual router in the system. An interface on the virtual router may have more than one IP address assigned to it." ::= { tmnxVRtrObjs 6 } vRtrIpAddrEntry OBJECT-TYPE SYNTAX VRtrIpAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an IP address assigned a virtual router interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires a values for all column variables to have been assigned." INDEX { vRtrID, vRtrIfIndex, vRiaIndex } ::= { vRtrIpAddrTable 1 } VRtrIpAddrEntry ::= SEQUENCE { vRiaIndex INTEGER, vRiaRowStatus RowStatus, vRiaIpAddress IpAddress, vRiaNetMask IpAddress, vRiaBcastAddrFormat INTEGER, vRiaReasmMaxSize INTEGER, vRiaIgpInhibit TruthValue, vRiaInetAddressType InetAddressType, vRiaInetAddress InetAddress, vRiaInetPrefixLen InetAddressPrefixLength, vRiaInetAddrState TmnxInetAddrState, vRiaInetEui64 TruthValue, vRiaInetOperAddress InetAddress, vRiaInetGwAddressType InetAddressType, vRiaInetGwAddress InetAddress, vRiaInetRemoteIpType InetAddressType, vRiaInetRemoteIp InetAddress, vRiaInetAddrPreferred TruthValue, vRiaSubscrPrefix TruthValue, vRiaSubscrPrefixType BITS, vRiaSubscrHostRoutePopulate TruthValue, vRiaTrackSrrpInstance Unsigned32, vRiaHoldUpTime Unsigned32 } vRiaIndex OBJECT-TYPE SYNTAX INTEGER (1..256) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The unique value which identifies this IP address entry for this interface of this virtual router in the Tmnx system. Those row entries with vRiaIndex = 1 represent the primary IP address for the interface identified by the vRtrID and vRtrIfIndex pair. Row entries with other values for vRiaIndex are secondary IP addresses. There must always be a primary IP address assigned an interface. This implies that if the primary address row is deleted, the secondary rows are also deleted." ::= { vRtrIpAddrEntry 1 } vRiaRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status used for creation, deletion, or control of vRtrIpAddrTable entries. All the other row variables must have been assigned values before the row can be place into the 'active' state." ::= { vRtrIpAddrEntry 2 } vRiaIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address assigned to a router's interface." ::= { vRtrIpAddrEntry 3 } vRiaNetMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the host bits set to 0." DEFVAL { 'FFFFFF00'H } -- 255.255.255.0 ::= { vRtrIpAddrEntry 4 } vRiaBcastAddrFormat OBJECT-TYPE SYNTAX INTEGER { allOnes (1), hostOnes (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "When vRiaBcastAddrFormat is set to 'allOnes', the 255.255.255.255 address is used for local broadcast. When vRiaBcastAddrFormat is set to 'hostOnes', the -1 address is used for the local broadcast. For example for subnet 10.10.16.0/20 the -1 address is 10.10.31.255." DEFVAL { hostOnes } ::= { vRtrIpAddrEntry 5 } vRiaReasmMaxSize OBJECT-TYPE SYNTAX INTEGER (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The size of the largest IP datagram which this entry can reassemble from incoming IP fragmented datagrams received on this interface." ::= { vRtrIpAddrEntry 6 } vRiaIgpInhibit OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This variable should only be associated with secondary ip addresses, i.e., when the value of vRiaIndex is other than 1. When vRiaIgpInhibit has a value of 'true', it indicates that the given secondary IP address should not be recognized as a local interface by the running IGP. For OSPF and IS-IS, this means that the given secondary IP addresses will not be injected as passive interfaces and will not be advertised as internal IP interfaces into the IGP's link state database. For RIP this means these secondary IP interfaces will not source RIP updates." ::= { vRtrIpAddrEntry 7 } vRiaInetAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "vRiaInetAddressType specifies the type of the vRiaInetAddress address assigned to a router's interface." ::= { vRtrIpAddrEntry 8 } vRiaInetAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The type of this address is determined by the value of the vRiaInetAddressType object. vRiaInetAddress indicates the IPv4/IPv6 address assigned to a router's interface." ::= { vRtrIpAddrEntry 9 } vRiaInetPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetPrefixLen specifies the length of the IP netmask for this interface address." ::= { vRtrIpAddrEntry 10 } vRiaInetAddrState OBJECT-TYPE SYNTAX TmnxInetAddrState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRiaInetAddrState indicates the address state of the IPv6 address of the interface." ::= { vRtrIpAddrEntry 11 } vRiaInetEui64 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetEui64 specifies whether the vRiaInetOperAddress is an eui64 address. This object can only be set at creation time. When vRiaInetEui64 is 'true', then the vRiaInetOperAddress is derived from the vRiaInetAddress and the physical address of the interface this address is attached to. vRiaInetAddress has to have all zeros the least significant 8 bytes. Also, vRiaInetPrefixLen cannot be longer than 64. When vRiaInetEui64 is 'false', then the vRiaInetOperAddress is a copy of vRiaInetAddress. The value is always 'false' when vRiaInetAddressType is not 'ipv6'." DEFVAL { false } ::= { vRtrIpAddrEntry 12 } vRiaInetOperAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRiaInetOperAddress indicates the operational address of this entry. The type of this address is determined by the value of the vRiaInetAddressType object." ::= { vRtrIpAddrEntry 13 } vRiaInetGwAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetGwAddressType specifies the address type of vRiaInetGwAddress." DEFVAL { unknown } ::= { vRtrIpAddrEntry 14 } vRiaInetGwAddress OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetGwAddress specifies the gateway address for the subnet specified by vRiaInetAddress and vRiaInetPrefixLen. The address type is defined by vRiaInetGwAddressType. This field is only valid when the address is configured on a subscriber interface." DEFVAL { ''H } ::= { vRtrIpAddrEntry 15 } vRiaInetRemoteIpType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetRemoteIpType specifies the address type of vRiaInetRemoteIp." DEFVAL { unknown } ::= { vRtrIpAddrEntry 16 } vRiaInetRemoteIp OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetRemoteIp specifies the IP address of the remote redundant interface. This field is only valid when the address is configured on a redundant interface." DEFVAL { ''H } ::= { vRtrIpAddrEntry 17 } vRiaInetAddrPreferred OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaInetAddrPreferred specifies whether vRiaInetAddress specified for this interface should be treated as preferred." DEFVAL { false } ::= { vRtrIpAddrEntry 18 } vRiaSubscrPrefix OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaSubscrPrefix specifies whether the vRiaIpAddress specified for this interface should be treated as a subscriber prefix. This object cannot be modified once the row is created." DEFVAL { false } ::= { vRtrIpAddrEntry 19 } vRiaSubscrPrefixType OBJECT-TYPE SYNTAX BITS { pd (0), wan-host (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaSubscrPrefixType indicates the type of subscriber prefix contained in vRiaIpAddress if vRiaSubscrPrefix is TRUE. This object cannot be modified once the row is created." DEFVAL { { pd } } ::= { vRtrIpAddrEntry 20 } vRiaSubscrHostRoutePopulate OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaSubscrHostRoutePopulate specifies if subscriber host routes are populated in the FIB (Forwarding Information Base). This object can only be set to 'true' if the address is configured on a subscriber interface." DEFVAL { false } ::= { vRtrIpAddrEntry 21 } vRiaTrackSrrpInstance OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaTrackSrrpInstance specifies the SRRP instance whose state is tracked on this ipaddress." DEFVAL { 0 } ::= { vRtrIpAddrEntry 22 } vRiaHoldUpTime OBJECT-TYPE SYNTAX Unsigned32 (0|100..5000) UNITS "milli-seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRiaHoldUpTime specifies the time to wait for the route to accept new state of the SRRP instance which is being tracked with this address. An 'inconsistentValue' error is returned if vRiaHoldUpTime is set to non-default value when vRiaTrackSrrpInstance is set to its default value." DEFVAL { 0 } ::= { vRtrIpAddrEntry 23 } -- -- Augmentation of the IP-FORWARD-MIB ipCidrRouteTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, ipCidrRouteTable, and the augmenting table, -- vRtrIpCidrRouteTable. This in effect extends the ipCidrRouteTable with -- additional columns. Creation (or deletion) of a row in the -- ipCidrRouteTable results in the same fate for the row in the -- vRtrIpCidrRouteTable. -- vRtrIpCidrRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIpCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIpCidrRouteTable provides an extension of the ipCidrRouteTable in the IP-FORWARD-MIB." ::= { tmnxVRtrObjs 7 } vRtrIpCidrRouteEntry OBJECT-TYPE SYNTAX VRtrIpCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrIpCidrRouteTable represents additional columns for attributes specific to the Alcatel-Lucent SROS series implementation for the IP route table." AUGMENTS { ipCidrRouteEntry } ::= { vRtrIpCidrRouteTable 1 } VRtrIpCidrRouteEntry ::= SEQUENCE { vRtrIpCidrRouteLastEnabledTime TimeStamp, vRtrIpCidrRoutePreference Unsigned32, vRtrIpCidrRouteMetric Unsigned32 } vRtrIpCidrRouteLastEnabledTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The vRtrIpCidrRouteLastEnabledTime variable contains the sysUpTime value when ipCidrRouteStatus was last set to active (1) to allow IP forwarding on this route entry." ::= { vRtrIpCidrRouteEntry 1 } vRtrIpCidrRoutePreference OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-create STATUS current DESCRIPTION "When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrIpCidrRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes " DEFVAL { 5 } ::= { vRtrIpCidrRouteEntry 2 } vRtrIpCidrRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value." ::= { vRtrIpCidrRouteEntry 3 } -- Virtual router Static Route Table -- The Virtual router Static Route Table maintains both active and inactive -- static routes that have been configured by the network manager. -- It adds knowledge of the autonomous system of the next hop, multiple -- next hops, and policy routing, and Classless Inter-Domain Routing. -- Active entries are also represented in the IP-FORWARD-MIB ipCidrTable. vRtrStaticRouteNumber OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of current vRtrStaticRouteTable entries that are 'active'." ::= { tmnxVRtrObjs 8 } vRtrStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's Static Routing table." ::= { tmnxVRtrObjs 9 } vRtrStaticRouteEntry OBJECT-TYPE SYNTAX VRtrStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, through a particular next hop." INDEX { vRtrID, vRtrStaticRouteDest, vRtrStaticRouteMask, vRtrStaticRouteIndex } ::= { vRtrStaticRouteTable 1 } VRtrStaticRouteEntry ::= SEQUENCE { vRtrStaticRouteDest IpAddress, vRtrStaticRouteMask IpAddress, vRtrStaticRouteIndex INTEGER, vRtrStaticRouteRowStatus RowStatus, vRtrStaticRouteLastEnabledTime TimeStamp, vRtrStaticRouteStatus INTEGER, vRtrStaticRouteStaticType INTEGER, vRtrStaticRoutePreference Unsigned32, vRtrStaticRouteMetric Unsigned32, vRtrStaticRouteEgressIfIndex InterfaceIndexOrZero, vRtrStaticRouteNextHop IpAddress, vRtrStaticRouteNextHopUnnumberedIf DisplayString, vRtrStaticRouteAdminState TmnxAdminState, vRtrStaticRouteIgpShortcut BITS, vRtrStaticRouteDisallowIgp TruthValue, vRtrStaticRouteTag Unsigned32 } vRtrStaticRouteDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this route. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x." ::= { vRtrStaticRouteEntry 1 } vRtrStaticRouteMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest." ::= { vRtrStaticRouteEntry 2 } vRtrStaticRouteIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The quaternary index for the vRtrStaticRouteTable." ::= { vRtrStaticRouteEntry 3 } vRtrStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status variable, used according to row installation and removal conventions." ::= { vRtrStaticRouteEntry 4 } vRtrStaticRouteLastEnabledTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The vRtrStaticRouteLastEnabledTime variable contains the sysUpTime value when vRtrStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry." ::= { vRtrStaticRouteEntry 5 } vRtrStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'" ::= { vRtrStaticRouteEntry 6 } vRtrStaticRouteStaticType OBJECT-TYPE SYNTAX INTEGER { unknown (0), nextHop (1), indirect (2), blackHole (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrStaticRouteStaticType indicates the type of static route represented by this row entry." DEFVAL { unknown } ::= { vRtrStaticRouteEntry 7 } vRtrStaticRoutePreference OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrStaticRoutePreference determines the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes " DEFVAL { 5 } ::= { vRtrStaticRouteEntry 8 } vRtrStaticRouteMetric OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "When ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route, the value of vRtrStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed. " DEFVAL { 1 } ::= { vRtrStaticRouteEntry 9 } vRtrStaticRouteEgressIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrStaticRouteStatus is 'inactive' or if this static route is configured as a black hole." ::= { vRtrStaticRouteEntry 11 } vRtrStaticRouteNextHop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "In case of remote routes, the address of the next system en route. This member is complemented by vRtrStaticRouteNextHopUnnumberedIf. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole." ::= { vRtrStaticRouteEntry 12 } vRtrStaticRouteNextHopUnnumberedIf OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The name of the unnumbered Interface which will be the nexthop for this route. This member is complemented by vRtrStaticRouteNextHop. Atmost only one of them can be non-null. If vRtrStaticRouteNextHop is '0.0.0.0' and vRtrStaticRouteNextHopUnnumberedIf is a null string then this static route is configured as a black hole." ::= { vRtrStaticRouteEntry 13 } vRtrStaticRouteAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The desired administrative state for this virtual router static route" DEFVAL { inService } ::= { vRtrStaticRouteEntry 14 } vRtrStaticRouteIgpShortcut OBJECT-TYPE SYNTAX BITS { te(0), ldp(1), ip(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). The bits of vRtrStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop." DEFVAL { { } } ::= { vRtrStaticRouteEntry 15 } vRtrStaticRouteDisallowIgp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrStaticRouteStaticType is 'indirect'). If the value of vRtrStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort." DEFVAL { false } ::= { vRtrStaticRouteEntry 16 } vRtrStaticRouteTag OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrStaticRouteTag is used to add a 32-bit integer tag to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set." DEFVAL { 0 } ::= { vRtrStaticRouteEntry 17 } -- -- Virtual Router Service Interface IP Address Range table -- vRtrSvcIpRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrSvcIpRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address ranges assigned to it." ::= { tmnxVRtrObjs 10 } vRtrSvcIpRangeEntry OBJECT-TYPE SYNTAX VRtrSvcIpRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an IP address range assigned a virtual router service interface. Entries can be created and deleted via SNMP SET operations. Setting RowStatus to 'active' requires values for all column variables to have been assigned." INDEX { vRtrID, vRtrSvcIpRangeAddress, vRtrSvcIpRangeMask } ::= { vRtrSvcIpRangeTable 1 } VRtrSvcIpRangeEntry ::= SEQUENCE { vRtrSvcIpRangeAddress IpAddress, vRtrSvcIpRangeMask Unsigned32, vRtrSvcIpRangeRowStatus RowStatus, vRtrSvcIpRangeExclusive TruthValue } vRtrSvcIpRangeAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The IP address prefix range assigned to a router's service interface." ::= { vRtrSvcIpRangeEntry 1 } vRtrSvcIpRangeMask OBJECT-TYPE SYNTAX Unsigned32 (0..32) MAX-ACCESS read-create STATUS current DESCRIPTION "The subnet mask associated with the Service IP address of this entry. The value of the mask is an 32-bit integer with all the network bits set to 1 and all the host bits set to 0." ::= { vRtrSvcIpRangeEntry 2 } vRtrSvcIpRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status used for creation, deletion, or control of vRtrSvcIpRangeTable entries." ::= { vRtrSvcIpRangeEntry 3 } vRtrSvcIpRangeExclusive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "When vRtrSvcIpRangeExclusive has a value of 'true', this set of addresses is reserved for services only and cannot be assigned to network ports. When it has a value of 'false', it could be used for services as well as network ports." DEFVAL { false } ::= { vRtrSvcIpRangeEntry 4 } -- -- Augmentation of the IP-MIB ipNetToMediaTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, ipNetToMediaTable, and the augmenting table, -- vRtrIpNetToMediaTable. This in effect extends the ipNetToMediaTable with -- additional columns. Creation (or deletion) of a row in the -- ipNetToMediaTable results in the same fate for the row in the -- vRtrIpNetToMediaTable. -- vRtrIpNetToMediaTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIpNetToMediaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIpNetToMediaTable provides an extension of the ipNetToMediaTable in the IP-MIB." ::= { tmnxVRtrObjs 11 } vRtrIpNetToMediaEntry OBJECT-TYPE SYNTAX VRtrIpNetToMediaEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrIpNetToMediaTable represents additional columns for attributes specific to the Alcatel-Lucent SROS series implementation for the vRtrIpNetToMediaTable." AUGMENTS { ipNetToMediaEntry } ::= { vRtrIpNetToMediaTable 1 } VRtrIpNetToMediaEntry ::= SEQUENCE { vRtrIpNetToMediaTimer Unsigned32, vRtrIpNetToMediaOperState TmnxOperState } vRtrIpNetToMediaTimer OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpNetToMediaTimer determines how much longer an ARP entry associated with an vRtrIpNetToMediaTable entry remains in the ARP cache. It is initially set to vRtrIfArpTimeout. When vRtrIpNetToMediaTimer has a value of zero, '0', the entry is cleared from the cache." ::= { vRtrIpNetToMediaEntry 1 } vRtrIpNetToMediaOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpNetToMediaOperState specifies if the ARP entry is being used actively in the ARP Table. When ipNetToMediaType has a value 'dynamic', vRtrIpNetToMediaOperState will never have a value of 'outOfService'." ::= { vRtrIpNetToMediaEntry 2 } -- -- VRtr instance aggregation objects -- vRtrInstanceAggregationTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS obsolete DESCRIPTION "Timestamp of the last change to the vRtrInstanceAggregationTable either from adding a row or removing a row." ::= { tmnxVRtrObjs 12 } vRtrInstanceAggregationTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInstanceAggregationEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "The vRtrInstanceAggregationTable is the list of configured VRtr aggregations and their operational status information. Specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated. This table was obsoleted in release 7.0. It is replaced with the vRtrInetInstAggrTable to support ipv6 addresses." ::= { tmnxVRtrObjs 13 } vRtrInstanceAggregationEntry OBJECT-TYPE SYNTAX VRtrInstanceAggregationEntry MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "An entry (conceptual row) in the vRtrInstanceAggregationTable. Entries are created by user. Entries are destroyed by user." INDEX { vRtrID, vRtrAggregationIpPrefix, vRtrAggregationIpPrefixMask } ::= { vRtrInstanceAggregationTable 1 } VRtrInstanceAggregationEntry ::= SEQUENCE { vRtrAggregationIpPrefix IpAddress, vRtrAggregationIpPrefixMask IpAddressPrefixLength, vRtrAggregationRowStatus RowStatus, vRtrAggregationLastChanged TimeStamp, vRtrAggregationSummaryOnly TruthValue, vRtrAggregationASSet TruthValue, vRtrAggregationAggregatorAS TmnxBgpAutonomousSystem, vRtrAggregationAggregatorIPAddr IpAddress, vRtrAggregationOperState TmnxOperState } vRtrAggregationIpPrefix OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "IP address prefix to match for the aggregation." ::= { vRtrInstanceAggregationEntry 1 } vRtrAggregationIpPrefixMask OBJECT-TYPE SYNTAX IpAddressPrefixLength MAX-ACCESS not-accessible STATUS obsolete DESCRIPTION "Mask length for vRtrAggregationIpPrefix, to match for the aggregation." ::= { vRtrInstanceAggregationEntry 2 } vRtrAggregationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Row status for this entry." ::= { vRtrInstanceAggregationEntry 3 } vRtrAggregationLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-create STATUS obsolete DESCRIPTION "Time stamp of last change of any object for this entry." ::= { vRtrInstanceAggregationEntry 4 } vRtrAggregationSummaryOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When true(1), only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When false(2), both the aggregate and more specific components are advertised." DEFVAL { false } ::= { vRtrInstanceAggregationEntry 5 } vRtrAggregationASSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When true(1), the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When false(2), the AS-Path will contain no AS-SET and will be originated by the ESR." DEFVAL { false } ::= { vRtrInstanceAggregationEntry 6 } vRtrAggregationAggregatorAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID." DEFVAL { 0 } ::= { vRtrInstanceAggregationEntry 7 } vRtrAggregationAggregatorIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS obsolete DESCRIPTION "When vRtrAggregationAggregatorAS is set to non zero, and vRtrAggregationAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When omitted, automatically uses its own ASN & Router-ID." DEFVAL { '00000000'H } -- 0.0.0.0 means not-set ::= { vRtrInstanceAggregationEntry 8 } vRtrAggregationOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS obsolete DESCRIPTION "vRtrAggregationOperState specifies the current operational status of the aggregation entry." ::= { vRtrInstanceAggregationEntry 9 } -- -- Static Route Index Table -- -- A read-only table which suggests the available index - vRtrStaticRouteIndex -- for a given set of vRtrID, vRtrStaticRouteDest & vRtrStaticRouteMask. -- vRtrStaticRouteIndex will be the fourth index while configuring an entry -- into the vRtrStaticRouteTable. vRtrStaticRouteIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrStaticRouteIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's Static Route Index Table." ::= { tmnxVRtrObjs 14 } vRtrStaticRouteIndexEntry OBJECT-TYPE SYNTAX VRtrStaticRouteIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The available index for the vRtrStaticRouteTable for every destination per virtual router." INDEX { vRtrID, vRtrStaticRouteIndexDest, vRtrStaticRouteIndexMask } ::= { vRtrStaticRouteIndexTable 1 } VRtrStaticRouteIndexEntry ::= SEQUENCE { vRtrStaticRouteIndexDest IpAddress, vRtrStaticRouteIndexMask IpAddress, vRtrStaticRouteAvailableIndex TestAndIncr } vRtrStaticRouteIndexDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The destination IP address of this index entry. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteMask object is not equal to x." ::= { vRtrStaticRouteIndexEntry 1 } vRtrStaticRouteIndexMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrStaticRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrStaticRouteMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrStaticRouteDest object is not equal to vRtrStaticRouteDest." ::= { vRtrStaticRouteIndexEntry 2 } vRtrStaticRouteAvailableIndex OBJECT-TYPE SYNTAX TestAndIncr (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The available quaternary index for the vRtrStaticRouteTable." ::= { vRtrStaticRouteIndexEntry 3 } -- -- Tunnel Table -- vRtrTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrTunnelTable maintains a list of tunnels for the specific router instance." ::= { tmnxVRtrObjs 17 } vRtrTunnelEntry OBJECT-TYPE SYNTAX VRtrTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrTunnelEntry defines a tunnel to a particular destination in a specific router context. A tunnel to a specific destination could established using GRE, LDP, RSVP or could be a static LSP." INDEX { vRtrID, vRtrTunnelDest, vRtrTunnelMask, vRtrTunnelPreference, vRtrTunnelType, vRtrTunnelID, vRtrTunnelNexthop } ::= { vRtrTunnelTable 1 } VRtrTunnelEntry ::= SEQUENCE { vRtrTunnelDest IpAddress, vRtrTunnelMask IpAddress, vRtrTunnelPreference Unsigned32, vRtrTunnelType TmnxTunnelType, vRtrTunnelID TmnxTunnelID, vRtrTunnelNexthop IpAddress, vRtrTunnelMetric Unsigned32, vRtrTunnelAge Integer32 } vRtrTunnelDest OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrTunnelDest maintains the destination IP address of this tunnel. This object may not take a Multicast (Class D) address value. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the vRtrTunnelMask object is not equal to x." ::= { vRtrTunnelEntry 1 } vRtrTunnelMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrTunnelMask indicates the mask to be logical-ANDed with the destination address before being compared to the value in the vRtrTunnelDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the vRtrTunnelMask by reference to the IP Address Class. Any assignment (implicit or otherwise) of an instance of this object to a value x must be rejected if the bitwise logical-AND of x with the value of the corresponding instance of the ipCidrRouteDest object is not equal to ipCidrRouteDest." ::= { vRtrTunnelEntry 2 } vRtrTunnelPreference OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrTunnelPreference determines the priority of this tunnel versus the other tunnels from different sources such as LDP, RSVP, GRE etc. This is an absolute number used internally by the system to specify preferences for the tunnel. Lowest number signifies the most preferred entry in the table." ::= { vRtrTunnelEntry 3 } vRtrTunnelType OBJECT-TYPE SYNTAX TmnxTunnelType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The type of this tunnel entity." ::= { vRtrTunnelEntry 4 } vRtrTunnelID OBJECT-TYPE SYNTAX TmnxTunnelID MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional index provided to distinguish between multiple tunnels to same destination having same characteristics. There could be multiple tunnels for the type 'sdp'. In such cases the vRtrTunnelID will hold the SDP Id. There could be multiple tunnels for the type 'ldp'. In such cases the vRtrTunnelID will hold the LSPId of the LSP in use. For other vRtrTunnelType values this field will always be 0 as only a single tunnel is established using other tunnel types." ::= { vRtrTunnelEntry 5 } vRtrTunnelNexthop OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The address of the next system en route; Otherwise, 0.0.0.0." ::= { vRtrTunnelEntry 6 } vRtrTunnelMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrTunnelMetric maintains the metric of the tunnel. This is used in addition to the preference for this tunnel." ::= { vRtrTunnelEntry 7 } vRtrTunnelAge OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of seconds since this tunnel entry was last updated or otherwise determined to be correct. No semantics of `too old' can be implied except through knowledge of owner of the tunnel." ::= { vRtrTunnelEntry 8 } -- -- Router-Advertisement Prefix Table -- vRtrAdvPrefixTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrAdvPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows the user to configure IPv6 prefixes for router advertisements on an interface" ::= { tmnxVRtrObjs 23 } vRtrAdvPrefixEntry OBJECT-TYPE SYNTAX VRtrAdvPrefixEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the vRtrAdvPrefixTable." INDEX { vRtrID, vRtrAdvPrefixIfIndex, vRtrAdvPrefixPrefix, vRtrAdvPrefixLength } ::= { vRtrAdvPrefixTable 1 } VRtrAdvPrefixEntry ::= SEQUENCE { vRtrAdvPrefixIfIndex InterfaceIndex, vRtrAdvPrefixPrefix InetAddress, vRtrAdvPrefixLength InetAddressPrefixLength, vRtrAdvPrefixRowStatus RowStatus, vRtrAdvPrefixOnLinkFlag TruthValue, vRtrAdvPrefixAutonomousFlag TruthValue, vRtrAdvPrefixPreferredLifetime Unsigned32, vRtrAdvPrefixValidLifetime Unsigned32 } vRtrAdvPrefixIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value which uniquely identifies the interface on which this prefix is configured. The interface identified by a particular value of this index is the same interface as identified by the same value of the IF-MIB's ifIndex." ::= { vRtrAdvPrefixEntry 1 } vRtrAdvPrefixPrefix OBJECT-TYPE SYNTAX InetAddress (SIZE (16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The ipv6 address prefix. The length of this object is the standard length (16 bytes ) for IPv6 prefixes." ::= { vRtrAdvPrefixEntry 2 } vRtrAdvPrefixLength OBJECT-TYPE SYNTAX InetAddressPrefixLength (4..127) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The prefix length associated with this prefix. The value 0 has no special meaning for this object." ::= { vRtrAdvPrefixEntry 3 } vRtrAdvPrefixRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The row status used for creation and deletion of router advertisement prefix entries." ::= { vRtrAdvPrefixEntry 4 } vRtrAdvPrefixOnLinkFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "This object has the value 'true(1)', if this prefix can be used for on-link determination and the value 'false(2)' otherwise." REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462" DEFVAL { true } ::= { vRtrAdvPrefixEntry 5 } vRtrAdvPrefixAutonomousFlag OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "Autonomous address configuration flag. When true(1), indicates that this prefix can be used for autonomous address configuration (i.e. can be used to form a local interface address). If false(2), it is not used to auto- configure a local interface address." REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462" DEFVAL { true } ::= { vRtrAdvPrefixEntry 6 } vRtrAdvPrefixPreferredLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The remaining length of time in seconds that this prefix will continue to be preferred, i.e. time until deprecation. A value of 4,294,967,295 represents infinity. The address generated from a deprecated prefix should no longer be used as a source address in new communications, but packets received on such an interface are processed as expected." REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462" DEFVAL { 604800 } ::= { vRtrAdvPrefixEntry 7 } vRtrAdvPrefixValidLifetime OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The remaining length of time, in seconds, that this prefix will continue to be valid, i.e. time until invalidation. A value of 4,294,967,295 represents infinity. The address generated from an invalidated prefix should not appear as the destination or source address of a packet." REFERENCE "For IPv6 RFC2461, especially sections 2 and 4.6.2 and RFC2462" DEFVAL { 2592000 } ::= { vRtrAdvPrefixEntry 8 } -- -- Virtual router Static Route Table -- -- vRtrInetStaticRouteTable replaces the vRtrStaticRouteTable -- that supports configuration of static routes using only the -- IPv4 address style. The vRtrInetStaticRouteTable is IP version -- neutral and allows configuration of static routes using IPv4 or -- IPv6 InetAddress style. vRtrInetStaticRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of addressing information relevant to this entity's Static Routing table." ::= { tmnxVRtrObjs 24 } vRtrInetStaticRouteEntry OBJECT-TYPE SYNTAX VRtrInetStaticRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A particular route to a particular destination, through a particular next hop." INDEX { vRtrID, vRtrInetStaticRouteDestType, vRtrInetStaticRouteDest, vRtrInetStaticRouteDestPfxLen, vRtrInetStaticRouteIndex } ::= { vRtrInetStaticRouteTable 1 } VRtrInetStaticRouteEntry ::= SEQUENCE { vRtrInetStaticRouteDestType InetAddressType, vRtrInetStaticRouteDest InetAddress, vRtrInetStaticRouteDestPfxLen InetAddressPrefixLength, vRtrInetStaticRouteIndex INTEGER, vRtrInetStaticRouteRowStatus RowStatus, vRtrInetStaticRouteLastEnabledTime TimeStamp, vRtrInetStaticRouteStatus INTEGER, vRtrInetStaticRouteStaticType INTEGER, vRtrInetStaticRoutePreference Unsigned32, vRtrInetStaticRouteMetric Unsigned32, vRtrInetStaticRouteEgressIfIndex InterfaceIndexOrZero, vRtrInetStaticRouteNextHopType InetAddressType, vRtrInetStaticRouteNextHop InetAddress, vRtrInetStaticRouteNextHopIf DisplayString, vRtrInetStaticRouteAdminState TmnxAdminState, vRtrInetStaticRouteIgpShortcut BITS, vRtrInetStaticRouteDisallowIgp TruthValue, vRtrInetStaticRouteTag Unsigned32, vRtrInetStaticRouteEnableBfd TruthValue, vRtrInetStaticRouteCpeAddrType InetAddressType, vRtrInetStaticRouteCpeAddr InetAddress, vRtrInetStaticRouteCpeInterval Unsigned32, vRtrInetStaticRouteCpeDropCnt Unsigned32, vRtrInetStaticRouteCpeEnableLog TruthValue, vRtrInetStaticRouteNHTunnelName TNamedItemOrEmpty, vRtrInetStaticRoutePrefixListName TNamedItemOrEmpty, vRtrInetStaticRoutePrefixListFlag INTEGER, vRtrInetStaticRouteLdpSync TruthValue, vRtrInetStaticRouteFC TNamedItemOrEmpty, vRtrInetStaticRouteFCPriority TPriorityOrUndefined } vRtrInetStaticRouteDestType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetStaticRouteDestType indicates the address type of vRtrInetStaticRouteDest address." ::= { vRtrInetStaticRouteEntry 1 } vRtrInetStaticRouteDest OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetStaticRouteDest indicates the destination IP address of this static route." ::= { vRtrInetStaticRouteEntry 2 } vRtrInetStaticRouteDestPfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetStaticRouteDestPfxLen indicates the prefix length associated with the vRtrInetStaticRouteDest address." ::= { vRtrInetStaticRouteEntry 3 } vRtrInetStaticRouteIndex OBJECT-TYPE SYNTAX INTEGER (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetStaticRouteIndex indicates the fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address." ::= { vRtrInetStaticRouteEntry 4 } vRtrInetStaticRouteRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrInetStaticRouteRowStatus controls the creation and deletion of rows in the table." ::= { vRtrInetStaticRouteEntry 5 } vRtrInetStaticRouteLastEnabledTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStaticRouteLastEnabledTime indicates the sysUpTime value when vRtrInetStaticRouteStatus was last set to active (1) to allow IP forwarding on this static route entry." ::= { vRtrInetStaticRouteEntry 6 } vRtrInetStaticRouteStatus OBJECT-TYPE SYNTAX INTEGER { active (1), inactive (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStaticRouteStatus indicates whether or not this route entry is active in the system. When an interface transitions to the down state, any associated route entries are marked as 'inactive' and are usually not displayed in a standard route table listing. When the interface transitions to the up state, the agent marks the associated routes as 'active'" ::= { vRtrInetStaticRouteEntry 7 } vRtrInetStaticRouteStaticType OBJECT-TYPE SYNTAX INTEGER { unknown (0), nextHop (1), indirect (2), blackHole (3), grt (4) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteStaticType specifies the type of static route represented by this row entry. The values of vRtrInetStaticRouteNextHopType, vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName depends on the value of vRtrInetStaticRouteStaticType. For details please look at the following chart: vRtrInetStaticRouteStaticType unknown nexthop indirect blackHole grt --------------------------------------------------------------------- vRtrInetStaticRouteNextHopType unknown valid valid unknown unknown vRtrInetStaticRouteNextHop null valid valid null null vRtrInetStaticRouteNextHopIf null valid null null null vRtrInetStaticRouteNHTunnelName null valid null null null Though all the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be valid when the value of vRtrInetStaticRouteStaticType is 'nexthop', please note that at most only one of them can have a non null string." DEFVAL { unknown } ::= { vRtrInetStaticRouteEntry 8 } vRtrInetStaticRoutePreference OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRoutePreference specifies the priority of this static route versus the routes from different sources such as BGP or OSPF etc. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences. Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes " DEFVAL { 5 } ::= { vRtrInetStaticRouteEntry 9 } vRtrInetStaticRouteMetric OBJECT-TYPE SYNTAX Unsigned32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteMetric specifies the metric for the static route. When ipCidrRouteProto has a value of 'netmgmt' to specify that this entry is a static route, the value of vRtrInetStaticRouteMetric associates a metric value with the route. This value is used when importing this static route into other protocols such as OSPF. When the metric is configured as zero then the metric configured in OSPF, default-import-metric, applies. This value is also used to determine which static route to install in the forwarding table: If there are multiple static routes with the same preference but unequal metric then the lower cost (metric) route will be installed. If there are multiple static routes with equal preference and metrics then ecmp rules apply. If there are multiple routes with unequal preference then the lower preference route will be installed. " DEFVAL { 1 } ::= { vRtrInetStaticRouteEntry 10 } vRtrInetStaticRouteEgressIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStaticRouteEgressIfIndex indicates the outgoing ifIndex for this route as computed by the static-route module. This variable will have a value of 0 if vRtrInetStaticRouteStatus is 'inactive' or if this static route is configured as a black hole." ::= { vRtrInetStaticRouteEntry 11 } vRtrInetStaticRouteNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteNextHopType specifies the address type of vRtrInetStaticRouteNextHop address." DEFVAL { unknown } ::= { vRtrInetStaticRouteEntry 12 } vRtrInetStaticRouteNextHop OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16|20)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteNextHop specifies the ip address of the next hop for the static route and it depends on the value of vRtrInetStaticRouteStaticType. At most only one of the values of the three objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be a non null string. If the value of vRtrInetStaticRouteStaticType is 'unknown' or 'blackHole' then the value of vRtrInetStaticRouteNextHopType should be 'unknown' and the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteNHTunnelName should be null strings." ::= { vRtrInetStaticRouteEntry 13 } vRtrInetStaticRouteNextHopIf OBJECT-TYPE SYNTAX DisplayString (SIZE(0..32)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteNextHopIf specifies the name of the interface to be used for the next hop of this static route and it depends on the value of vRtrInetStaticRouteStaticType. At most only one of the values of the three objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be a non null string. If the value of vRtrInetStaticRouteStaticType is 'unknown' or 'blackHole' then the value of vRtrInetStaticRouteNextHopType should be 'unknown' and the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteNHTunnelName should be null strings." ::= { vRtrInetStaticRouteEntry 14 } vRtrInetStaticRouteAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteAdminState specifies the desired administrative state for this virtual router static route" DEFVAL { inService } ::= { vRtrInetStaticRouteEntry 15 } vRtrInetStaticRouteIgpShortcut OBJECT-TYPE SYNTAX BITS { te(0), ldp(1), ip(2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteIgpShortcut specifies the Layer 2 tunneling mechanism used for IGP shortcuts. The value of vRtrInetStaticRouteIgpShortcut is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). The bits of vRtrInetStaticRouteIgpShortcut identify Layer 2 tunneling mechanisms used for IGP shortcuts. If a bit is set, IGP shortcuts associated with that tunneling mechanism will be used to resolve next-hop for the static-route. If no bits are set, IGP shortcuts will not be used to resolve next-hop for the static routes. The tunneling mechanisms represented by each bit are: te(0) - RSVP Traffic Engineering ldp(1) - LDP /32 Route Forwarding Equivalence Class (FEC) ip(2) - IP (IP-in-IP or GRE) Evaluation of tunnel preference is based on the following order, in descending priority: 1. Traffic Engineered Shortcut (RSVP-TE) 2. LDP /32 Route FEC Shortcut 3. IP Shortcut (IP-in-IP or GRE) 4. Actual IGP Next-Hop." DEFVAL { { } } ::= { vRtrInetStaticRouteEntry 16 } vRtrInetStaticRouteDisallowIgp OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteDisallowIgp specifies if IGP shortcuts are to be used or not. The value of vRtrInetStaticRouteDisallowIgp is valid only for indirect static routes (i.e. vRtrInetStaticRouteStaticType is 'indirect'). If the value of vRtrInetStaticRouteDisallowIgp is set to 'true', and if none of the defined tunneling mechanisms (RSVP-TE, LDP or IP) qualify as a next-hop, the normal IGP next-hop to the indirect next-hop address will not be used. If the value is set to 'false', IGP next-hop to the indirect next-hop address can be used as the next-hop of the last resort." DEFVAL { false } ::= { vRtrInetStaticRouteEntry 17 } vRtrInetStaticRouteTag OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteTag specifies a 32-bit integer tag that is used to add to the static route. This tag could then be used in route policies to control distribution of the route into other protocols. A value of 0 indicates that the tag has not been set." DEFVAL { 0 } ::= { vRtrInetStaticRouteEntry 18 } vRtrInetStaticRouteEnableBfd OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteEnableBfd specifies whether or not Bi-directional Forwarding Detection is enabled on this static route. When the value is 'true', this static-route can establish BFD sessions and use BFD as a signalling mechanism. When it is 'false', it cannot use BFD." DEFVAL { false } ::= { vRtrInetStaticRouteEntry 19 } vRtrInetStaticRouteCpeAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteCpeAddrType specifies the address type of vRtrInetStaticRouteCpeAddr address. When the value of vRtrInetStaticRouteCpeAddrType is not 'unknown', statitistics for the Customer-Provided Equipment (CPE) host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable." DEFVAL { unknown } ::= { vRtrInetStaticRouteEntry 20 } vRtrInetStaticRouteCpeAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteCpeAddr specifies the IP address of the target CPE device. When this object is configured, ICMP pings will be sent to this target IP address to determine CPE connectivity and whether this static route should be active. When the value of vRtrInetStaticRouteCpeAddr is non-empty, statitistics for the CPE host checks for this static route entry will be found in the sparsely dependent table extension, vRtrInetStatRteCpeChkStatsTable." DEFVAL { ''H } ::= { vRtrInetStaticRouteEntry 21 } vRtrInetStaticRouteCpeInterval OBJECT-TYPE SYNTAX Unsigned32 (1..255) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteCpeInterval specifies the interval, in seconds, between ICMP pings to the target CPE IP address, vRtrInetStaticRouteCpeAddr." DEFVAL { 1 } ::= { vRtrInetStaticRouteEntry 22 } vRtrInetStaticRouteCpeDropCnt OBJECT-TYPE SYNTAX Unsigned32 (1..255) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteCpeDropCnt specifies the number of consecutive ping-replies that must be missed before concluding the CPE is down. If the CPE is determined to be down, the associated static route will be deactivated." DEFVAL { 3 } ::= { vRtrInetStaticRouteEntry 23 } vRtrInetStaticRouteCpeEnableLog OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteCpeEnableLog specifies whether to enable the logging of transitions between active and in-active based on the CPE connectivity check. A value of 'true (1)' indicates that logging should be enabled." DEFVAL { false } ::= { vRtrInetStaticRouteEntry 24 } vRtrInetStaticRouteNHTunnelName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteNHTunnelName specifies the name of the IPsec tunnel to be used for the nexthop of this static route and it depends on the value of vRtrInetStaticRouteStaticType. The value of vRtrInetStaticRouteNHTunnelName is valid only for static routes configured for a vprn service. An 'inconsistentValue' error is returned if an attempt is made to set this object for the base instance which can be identified by vRtrID value of '1'. At most only one of the values of the three objects: vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf and vRtrInetStaticRouteNHTunnelName can be a non null string. If the value of vRtrInetStaticRouteStaticType is 'blackHole' then the value of vRtrInetStaticRouteNextHopType should be 'unknown' and the values of vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteNHTunnelName should be null strings." ::= { vRtrInetStaticRouteEntry 25 } vRtrInetStaticRoutePrefixListName OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRoutePrefixListName specifies the name of a prefix list to match on. This value allows the existence of specified routes within the Route Table Manager (RTM) to trigger the addition of a static route in the RTM. If any of the routes specified in the vRtrInetStaticRoutePrefixListName exists in the RTM, then the associated static route should be added to the RTM." DEFVAL { "" } ::= { vRtrInetStaticRouteEntry 26 } vRtrInetStaticRoutePrefixListFlag OBJECT-TYPE SYNTAX INTEGER { any (0), all (1), none (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRoutePrefixListFlag specifies the routes to match on from vRtrInetStaticRoutePrefixListName. If 'all (1)' is specified, all of the routes specified in the vRtrInetStaticRoutePrefixListName should exist in the Route Table Manager (RTM) for the associated static-route to be added in the RTM. If 'none (2)' is specified, none of the routes specified in the vRtrInetStaticRoutePrefixListName should exist in the RTM for the associated static-route to be added in the RTM. The value of vRtrInetStaticRoutePrefixListFlag will be reset to the default value when vRtrInetStaticRoutePrefixListName is set to the default value." DEFVAL { any } ::= { vRtrInetStaticRouteEntry 27 } vRtrInetStaticRouteLdpSync OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteLdpSync specifies whether the the LDP synchronization timer for this route on an interface, vRtrIfLdpSyncTimer, is enabled or not. If the value of vRtrInetStaticRouteLdpSync is 'true (1)', this static route would not enable the preferred route immediately after the interface to the next-hop comes up but would wait for the LDP adjacency on the link to come up and start the ldp sync timer, vRtrIfLdpSyncTimer. On timer expiration, routing will enable the static route. If the value of vRtrInetStaticRouteLdpSync is 'false (2)', vRtrIfLdpSyncTimer would not be applied to this static route." DEFVAL { false } ::= { vRtrInetStaticRouteEntry 28 } vRtrInetStaticRouteFC OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteFC specifies the forwarding class associated with the static route. This object can take one of the following eight values - 'be', 'l2', 'af', 'l1', 'h2', 'ef', 'h1' or 'nc'. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when vRtrInetStaticRouteStaticType is not set to either 'indirect' or 'nexthop'." DEFVAL { ''H } ::= { vRtrInetStaticRouteEntry 29} vRtrInetStaticRouteFCPriority OBJECT-TYPE SYNTAX TPriorityOrUndefined MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetStaticRouteFCPriority specifies the priority to be assigned to the static routes. An 'inconsistentValue' error is returned if an attempt is made to set this object to a non-default value when vRtrInetStaticRouteStaticType is not set to either 'indirect' or 'nexthop'." DEFVAL { undefined } ::= { vRtrInetStaticRouteEntry 30} -- -- Inet Static Route Index Table -- -- A read-only table which suggests the available -- index - vRtrInetStaticRouteIndex -- for a given set of vRtrID, vRtrInetStaticRouteDestType, -- vRtrInetStaticRouteDest & vRtrInetStaticRouteDestPfxLen. -- vRtrInetStaticRouteIndex will be the fifth index while -- configuring an entry into the vRtrInetStaticRouteTable. -- vRtrInetStaticRouteIndexTable table replaces vRtrStaticRouteIndexTable vRtrInetStaticRouteIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetStaticRouteIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This entity's Static Route Index Table." ::= { tmnxVRtrObjs 25 } vRtrInetStaticRouteIndexEntry OBJECT-TYPE SYNTAX VRtrInetStaticRouteIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The available index for the vRtrInetStaticRouteTable for every destination per virtual router." INDEX { vRtrID, vRtrInetStaticRouteDestType, vRtrInetStaticRouteDest, vRtrInetStaticRouteDestPfxLen } ::= { vRtrInetStaticRouteIndexTable 1 } VRtrInetStaticRouteIndexEntry ::= SEQUENCE { vRtrInetStaticRouteAvailIndex TestAndIncr } vRtrInetStaticRouteAvailIndex OBJECT-TYPE SYNTAX TestAndIncr (1..2147483647) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStaticRouteAvailIndex indicates the available fifth index for the vRtrInetStaticRouteTable. The fifth index to vRtrInetStaticRouteTable identifies a specific next-hop route to distinguish it from other routes that share the same destination address." ::= { vRtrInetStaticRouteIndexEntry 1 } -- -- VRtr instance aggregation objects -- vRtrInetInstAggrTblLastChged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "Timestamp of the last change to the vRtrInetInstAggrTable either from adding a row or removing a row." ::= { tmnxVRtrObjs 26 } -- vRtrInetInstAggrTable replaces the vRtrInstanceAggregationTable -- that supports configuration of aggregate routes using only the -- IPv4 address style. The vRtrInetInstAggrTable is IP version -- neutral and allows configuration of aggregate routes using IPv4 or -- IPv6 InetAddress style. vRtrInetInstAggrTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetInstAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrInetInstAggrTable is the list of configured virtual router aggregations and their operational status information. vRtrInetInstAggrTable specifies the route aggregates that should be generated into the virtual router if at least one contributing route (more specific) is learned. A route could match multiple aggregate statements. For instance, with the following entries: aggregate 10.0.0.0/8 aggregate 10.1.0.0/16 If the route 10.1.1.0/24 is learned, both aggregates would be generated." ::= { tmnxVRtrObjs 27 } vRtrInetInstAggrEntry OBJECT-TYPE SYNTAX VRtrInetInstAggrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "vRtrInetInstAggrEntry indicates an entry (conceptual row) in the vRtrInetInstAggrTable. Entries are created and destroyed by user." INDEX { vRtrID, vRtrInetAggrIpPrefixType, vRtrInetAggrIpPrefix, vRtrInetAggrIpPrefixLen } ::= { vRtrInetInstAggrTable 1 } VRtrInetInstAggrEntry ::= SEQUENCE { vRtrInetAggrIpPrefixType InetAddressType, vRtrInetAggrIpPrefix InetAddress, vRtrInetAggrIpPrefixLen InetAddressPrefixLength, vRtrInetAggrRowStatus RowStatus, vRtrInetAggrLastChanged TimeStamp, vRtrInetAggrSummaryOnly TruthValue, vRtrInetAggrASSet TruthValue, vRtrInetAggrAggregatorAS TmnxBgpAutonomousSystem, vRtrInetAggrAggregatorIPAddr IpAddress, vRtrInetAggrOperState TmnxOperState, vRtrInetAggrAggregatorAS4Byte InetAutonomousSystemNumber, vRtrInetAggrNextHopType INTEGER } vRtrInetAggrIpPrefixType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetAggrIpPrefixType indicates the IP address type of vRtrInetAggrIpPrefix." ::= { vRtrInetInstAggrEntry 1 } vRtrInetAggrIpPrefix OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetAggrIpPrefixType indicates the IP address prefix to match for the aggregation." ::= { vRtrInetInstAggrEntry 2 } vRtrInetAggrIpPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetAggrIpPrefixLen indicates the prefix length for vRtrInetAggrIpPrefix, to match for the aggregation." ::= { vRtrInetInstAggrEntry 3 } vRtrInetAggrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "vRtrInetAggrRowStatus controls the creation and deletion of rows in the table." ::= { vRtrInetInstAggrEntry 4 } vRtrInetAggrLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAggrLastChanged indicates the time stamp of the last change to this row of vRtrInetInstAggrTable." ::= { vRtrInetInstAggrEntry 5 } vRtrInetAggrSummaryOnly OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetAggrSummaryOnly specifies if specific routes that make up aggregates are advertised or not. When vRtrInetAggrSummaryOnly has value of 'true(1)', only the aggregate is advertised, the more specfic routes that make up the aggregate are not. When vRtrInetAggrSummaryOnly has value of 'false(2)', both the aggregate and more specific components are advertised." DEFVAL { false } ::= { vRtrInetInstAggrEntry 6 } vRtrInetAggrASSet OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetAggrASSet specifies whether the aggregate route has AS-SET. When vRtrInetAggrASSet has value of 'true(1)', the AS-Path of the resulting aggregate will contain an AS-SET containing all AS numbers from the contributing routes. When vRtrInetAggrASSet has value of 'false(2)', the AS-Path will contain no AS-SET and will be originated by the ESR." DEFVAL { false } ::= { vRtrInetInstAggrEntry 7 } vRtrInetAggrAggregatorAS OBJECT-TYPE SYNTAX TmnxBgpAutonomousSystem MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The value of vRtrInetAggrAggregatorAS specifies the aggregator's ASN. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorAS is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes. This object was obsoleted in release 7.0. It is replaced with the 4-byte AS number defined by vRtrInetAggrAggregatorAS4Byte." DEFVAL { 0 } ::= { vRtrInetInstAggrEntry 8 } vRtrInetAggrAggregatorIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetAggrAggregatorIPAddr specifies the aggregator's IP address. When vRtrInetAggrAggregatorAS is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorIPAddr is not set, the aggregate routes ASN & Router-ID will be used for the aggregator path attributes." DEFVAL { '00000000'H } -- 0.0.0.0 means not-set ::= { vRtrInetInstAggrEntry 9 } vRtrInetAggrOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAggrOperState specifies the current operational status of the aggregation entry." ::= { vRtrInetInstAggrEntry 10 } vRtrInetAggrAggregatorAS4Byte OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetAggrAggregatorAS4Byte specifies the aggregator's Autonomous System Number (ASN). When vRtrInetAggrAggregatorAS4Byte is set to non zero, and vRtrInetAggrAggregatorIPAddr is set to non-zero, the supplied ASN and IP address will be used for the aggregator path attributes. When vRtrInetAggrAggregatorAS4Byte is not set, the aggregate routes ASN and Router-ID will be used for the aggregator path attributes." DEFVAL { 0 } ::= { vRtrInetInstAggrEntry 11 } vRtrInetAggrNextHopType OBJECT-TYPE SYNTAX INTEGER { none (0), blackHole (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetAggrNextHopType specifies whether the aggregate route will be installed in the Forwarding Information Base (FIB) when the route is activated. When vRtrInetAggrNextHopType has a value of 'none', the aggregate route will not be installed in the FIB. When vRtrInetAggrNextHopType has a value of 'blackHole' and the aggregate route is active, it will be installed in the FIB with a black-hole next-hop and packets matching this route will be discarded." DEFVAL { none } ::= { vRtrInetInstAggrEntry 12 } -- -- Virtual Router Service Interface IP Address Range table -- IP-version independent -- vRtrInetSvcIpRangeTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetSvcIpRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrInetSvcIpRangeTable has an entry for each IP address range configured for a virtual interface in a virtual router in the system. An interface on the virtual router may have more than one Service IP address range assigned to it." ::= { tmnxVRtrObjs 28 } vRtrInetSvcIpRangeEntry OBJECT-TYPE SYNTAX VRtrInetSvcIpRangeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an IP address range assigned a virtual router service interface. Setting RowStatus to 'active' requires values for all column variables to have been assigned." INDEX { vRtrID, vRtrInetSvcIpRangeAddrType, vRtrInetSvcIpRangeAddr, vRtrInetSvcIpRangePfxLen } ::= { vRtrInetSvcIpRangeTable 1 } VRtrInetSvcIpRangeEntry ::= SEQUENCE { vRtrInetSvcIpRangeAddrType InetAddressType, vRtrInetSvcIpRangeAddr InetAddress, vRtrInetSvcIpRangePfxLen InetAddressPrefixLength, vRtrInetSvcIpRangeRowStatus RowStatus, vRtrInetSvcIpRangeExclusive TruthValue } vRtrInetSvcIpRangeAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetSvcIpRangeAddrType indicates the IP address type of vRtrInetSvcIpRangeAddr." ::= { vRtrInetSvcIpRangeEntry 1 } vRtrInetSvcIpRangeAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetSvcIpRangeAddr indicates the IP address service range assigned to a router's service interface. The address type of vRtrInetSvcIpRangeAddr is indicated by vRtrInetSvcIpRangeAddrType." ::= { vRtrInetSvcIpRangeEntry 2 } vRtrInetSvcIpRangePfxLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetSvcIpRangePfxLen specifies the prefix length to be used with vRtrInetSvcIpRangeAddr for determining the IP address range." ::= { vRtrInetSvcIpRangeEntry 3 } vRtrInetSvcIpRangeRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetSvcIpRangeRowStatus is used for creation and deletion of IP service prefix ranges." ::= { vRtrInetSvcIpRangeEntry 4 } vRtrInetSvcIpRangeExclusive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrInetSvcIpRangeExclusive specifies how the set of addresses specified by this entry are interpreted. When the value is 'true', they are reserved for services only and cannot be assigned to network ports. When the value is 'false', it could be used for services as well as network ports." DEFVAL { false } ::= { vRtrInetSvcIpRangeEntry 5 } -- -- Augmentation of the IP-MIB ipNetToPhysicalTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, ipNetToPhysicalTable, and the augmenting table, -- vRtrIpNetToPhysicalTable. This in effect extends the ipNetToPhysicalTable -- with additional columns. Creation (or deletion) of a row in the -- ipNetToPhysicalTable results in the same fate for the row in the -- vRtrIpNetToPhysicalTable. -- vRtrIpNetToPhysicalTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIpNetToPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIpNetToPhysicalTable provides an extension of the ipNetToPhysicalTable in the IP-MIB." ::= { tmnxVRtrObjs 29 } vRtrIpNetToPhysicalEntry OBJECT-TYPE SYNTAX VRtrIpNetToPhysicalEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrIpNetToPhysicalTable represents additional columns for attributes specific to the Alcatel-Lucent SROS series implementation for the vRtrIpNetToPhysicalTable." AUGMENTS { ipNetToPhysicalEntry } ::= { vRtrIpNetToPhysicalTable 1 } VRtrIpNetToPhysicalEntry ::= SEQUENCE { vRtrIpNetToPhysicalTimer Unsigned32, vRtrIpNetToPhysicalOperState TmnxOperState, vRtrIpNetToPhysicalIsRouter TruthValue, vRtrIpNetToPhysicalMTU Unsigned32, vRtrIpNetToPhysicalPort TmnxPortID, vRtrIpNetToPhysicalEncap TmnxEncapVal } vRtrIpNetToPhysicalTimer OBJECT-TYPE SYNTAX Unsigned32 (0..65535) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpNetToPhysicalTimer indicates how much longer an ARP entry associated with an vRtrIpNetToPhysicalTable entry remains in the ARP cache. It is initially set to vRtrIfArpTimeout. When vRtrIpNetToPhysicalTimer has a value of zero, '0', the entry is cleared from the cache." ::= { vRtrIpNetToPhysicalEntry 1 } vRtrIpNetToPhysicalOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpNetToPhysicalOperState indicates if the ARP entry is being used actively in the ARP Table. When ipNetToPhysicalType has a value 'dynamic', vRtrIpNetToPhysicalOperState will never have a value of 'outOfService'." ::= { vRtrIpNetToPhysicalEntry 2 } vRtrIpNetToPhysicalIsRouter OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpNetToPhysicalIsRouter indicates whether this ipNetToPhysicalEntry is a router." ::= { vRtrIpNetToPhysicalEntry 3 } vRtrIpNetToPhysicalMTU OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpNetToPhysicalMTU indicates the MTU of the link attached to this ipNetToPhysicalEntry." ::= { vRtrIpNetToPhysicalEntry 4 } vRtrIpNetToPhysicalPort OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpNetToPhysicalPort indicates the ID of the port on which this entry was learned." ::= { vRtrIpNetToPhysicalEntry 5 } vRtrIpNetToPhysicalEncap OBJECT-TYPE SYNTAX TmnxEncapVal MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpNetToPhysicalEncap indicates the encap value of the SAP this entry was learned on. If this entry was learned on a network port or null-encap SAP, the value of this object will be zero." ::= { vRtrIpNetToPhysicalEntry 6 } -- -- Augmentation of the IP-FORWARD-MIB inetCidrRouteTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, inetCidrRouteTable, and the augmenting table, -- vRtrInetCidrRouteTable. This in effect extends the inetCidrRouteTable with -- additional columns. Creation (or deletion) of a row in the -- inetCidrRouteTable results in the same fate for the row in the -- vRtrInetCidrRouteTable. -- vRtrInetCidrRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrInetCidrRouteTable provides an extension of the inetCidrRouteTable in the IP-FORWARD-MIB." ::= { tmnxVRtrObjs 30 } vRtrInetCidrRouteEntry OBJECT-TYPE SYNTAX VRtrInetCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrInetCidrRouteTable represents additional columns for attributes specific to the Alcatel-Lucent SROS series implementation for the IP route table." AUGMENTS { inetCidrRouteEntry } ::= { vRtrInetCidrRouteTable 1 } VRtrInetCidrRouteEntry ::= SEQUENCE { vRtrInetCidrRouteLastEnabledTime TimeStamp, vRtrInetCidrRoutePreference Unsigned32, vRtrInetCidrRouteMetric Unsigned32, vRtrInetCidrRouteIfVRtrId TmnxVRtrIDOrZero, vRtrInetCidrRouteTunnEndpntInfo OCTET STRING, vRtrInetCidrProtocolInstance Unsigned32, vRtrInetCidrRouteNextHopType TmnxInetCidrNextHopType, vRtrInetCidrRouteNextHopOwner TmnxInetCidrNextHopOwner, vRtrInetCidrRouteNHOwnerAuxInfo Unsigned32, vRtrInetCidrRouteNHFC TFCNameOrEmpty, vRtrInetCidrRouteNHPriority TPriorityOrUndefined, vRtrInetCidrRouteBkupFlags INTEGER, vRtrInetCidrRouteBkupNextHopType InetAddressType, vRtrInetCidrRouteBkupNextHop InetAddress, vRtrInetCidrRouteBkupMetric Unsigned32, vRtrInetCidrRouteNextHopRepCount Unsigned32, vRtrInetCidrRouteBkupNHType TmnxInetCidrNextHopType, vRtrInetCidrRouteBkupNHOwner TmnxInetCidrNextHopOwner, vRtrInetCidrRouteBkupNHOwnAxInfo Unsigned32 } vRtrInetCidrRouteLastEnabledTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The vRtrInetCidrRouteLastEnabledTime variable indicates the sysUpTime value when ipCidrRouteStatus was last set to active (1) to allow IP forwarding on this route entry." ::= { vRtrInetCidrRouteEntry 1 } vRtrInetCidrRoutePreference OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRoutePreference specifies the priority of this static route versus the routes from different sources such as BGP or OSPF etc, when ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes " DEFVAL { 5 } ::= { vRtrInetCidrRouteEntry 2 } vRtrInetCidrRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteMetric indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value." ::= { vRtrInetCidrRouteEntry 3 } vRtrInetCidrRouteIfVRtrId OBJECT-TYPE SYNTAX TmnxVRtrIDOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteIfVRtrId indicates the virtual router instance of the egress interface defined by inetCidrRouteIfIndex. This object is valid only for subscriber management routes. For all other route types, this object will have a value of zero." ::= { vRtrInetCidrRouteEntry 4 } vRtrInetCidrRouteTunnEndpntInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0|12..136)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteTunnEndpntInfo indicates tunnel endpoint information. The first 4 bytes indicate number of tunnel end-points, the next 4 bytes indicate IGP cost to reach tunnel end-points and the next 64 bytes indicate upto 16 4-byte IPv4 addresses (the number of end-points represented by bytes 1-4 indicate how many addresses are present). When no tunnel endpoints exist, the size of this object will be 0. When atleast one tunnel-endpoint exists, there would be 12 bytes to represent the information related to one tunnel endpoint." ::= { vRtrInetCidrRouteEntry 5 } vRtrInetCidrProtocolInstance OBJECT-TYPE SYNTAX Unsigned32 (0..31) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrProtocolInstance indicates the instance of the protocol through which this route was learned. A single instance protocol will always return an instance value 0." ::= { vRtrInetCidrRouteEntry 6 } vRtrInetCidrRouteNextHopType OBJECT-TYPE SYNTAX TmnxInetCidrNextHopType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteNextHopType indicates the type of next hop for this route." ::= { vRtrInetCidrRouteEntry 7 } vRtrInetCidrRouteNextHopOwner OBJECT-TYPE SYNTAX TmnxInetCidrNextHopOwner MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteNextHopOwner indicates the owner of next hop for this route." ::= { vRtrInetCidrRouteEntry 8 } vRtrInetCidrRouteNHOwnerAuxInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteNHOwnerAuxInfo indicates the auxiliary information for next hop owner as indicated by vRtrInetCidrRouteNextHopOwner. The value of vRtrInetCidrRouteNHOwnerAuxInfo indicates the number of tunnel-ids existing for this next hop type and owner." ::= { vRtrInetCidrRouteEntry 9 } vRtrInetCidrRouteNHFC OBJECT-TYPE SYNTAX TFCNameOrEmpty MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteNHFC indicates the forwarding class or the sub forwarding class associated with the CIDR route. Specification of a sub forwarding class is also allowed. The format of a sub forwarding class is the concatenation of the base forwarding class and a sub class identifier in the form base-fc-name[.sub-fc-name]." ::= { vRtrInetCidrRouteEntry 10 } vRtrInetCidrRouteNHPriority OBJECT-TYPE SYNTAX TPriorityOrUndefined MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteNHPriority indicates the priority to be assigned to the CIDR routes." ::= { vRtrInetCidrRouteEntry 11 } vRtrInetCidrRouteBkupFlags OBJECT-TYPE SYNTAX INTEGER { none (0), -- next-hop not specified hasLfa (1), -- next-hop has loop-free-alternate (LFA) hasBackup (2), -- route has a backup next-hop isBackup (3) -- route is a backup next-hop } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteBkupFlags indicates the presence or absence of LFA next-hops and backup routes. 'none' indicates that no next-hop is present. 'hasLfa' indicates that an LFA next-hop is present in addition to the regular next-hop. 'hasBackup' indicates that this route has a backup route. 'isBackup' indicates that this route is a backup route to another route with the same prefix." ::= { vRtrInetCidrRouteEntry 12 } vRtrInetCidrRouteBkupNextHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteBkupNextHopType indicates the IP address type of vRtrInetCidrRouteBkupNextHop. The value of vRtrInetCidrRouteBkupNextHopType is only valid when vRtrInetCidrRouteBkupFlags has a value of 'hasLfa'." ::= { vRtrInetCidrRouteEntry 13 } vRtrInetCidrRouteBkupNextHop OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteBkupNextHop indicates the IP address of a backup next-hop. The value of vRtrInetCidrRouteBkupNextHop is only valid when vRtrInetCidrRouteBkupFlags has a value of 'hasLfa'." ::= { vRtrInetCidrRouteEntry 14 } vRtrInetCidrRouteBkupMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteBkupMetric indicates the routing metric for a backup route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. The value of vRtrInetCidrRouteBkupMetric is only valid when vRtrInetCidrRouteBkupFlags has a value of 'hasLfa'." ::= { vRtrInetCidrRouteEntry 15 } vRtrInetCidrRouteNextHopRepCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteNextHopRepCount indicates the number of times the next-hop repeats for a particular route." ::= { vRtrInetCidrRouteEntry 16 } vRtrInetCidrRouteBkupNHType OBJECT-TYPE SYNTAX TmnxInetCidrNextHopType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteBkupNHType indicates the type of next hop for this backup route." ::= { vRtrInetCidrRouteEntry 17 } vRtrInetCidrRouteBkupNHOwner OBJECT-TYPE SYNTAX TmnxInetCidrNextHopOwner MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteBkupNHOwner indicates the owner of next hop for this backup route." ::= { vRtrInetCidrRouteEntry 18 } vRtrInetCidrRouteBkupNHOwnAxInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetCidrRouteBkupNHOwnAxInfo indicates the auxiliary information for next hop owner as indicated by vRtrInetCidrRouteBkupNHOwner. The value of vRtrInetCidrRouteBkupNHOwnAxInfo indicates the tunnel-id existing for this backup next hop type and owner." ::= { vRtrInetCidrRouteEntry 19 } -- -- Alcatel-Lucent SROS series Virtual Router Global InterfaceIndex to -- vRtrID and vRtrIfIndex Mapping Table -- vRtrIfGlobalIndexTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfGlobalIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This is a read-only table, each row of which represents a one to one equivalence between a unique system wide router interface index (vRtrIfGlobalIndex) and its corresponding virtual router ID (vRtrID) and index in the vRtrIfTable (vRtrIfIndex)." ::= { tmnxVRtrObjs 37 } vRtrIfGlobalIndexEntry OBJECT-TYPE SYNTAX VRtrIfGlobalIndexEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrIfGlobalIndexTable corresponds to a row in the vRtrIfTable. When an entry is created or deleted in the vRtrIfTable, a corresponding entry is created or deleted in this table." INDEX { vRtrIfGlobalIndex } ::= { vRtrIfGlobalIndexTable 1 } VRtrIfGlobalIndexEntry ::= SEQUENCE { vRtrIfGlobalIndexvRtrID TmnxVRtrID, vRtrIfGlobalIndexvRtrIfIndex InterfaceIndex } vRtrIfGlobalIndexvRtrID OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfGlobalIndexvRtrID indicates the vRtrID that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex. This value represents the specific instance of virtual router which the vRtrIfGlobalIndex belongs to." ::= { vRtrIfGlobalIndexEntry 1 } vRtrIfGlobalIndexvRtrIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfGlobalIndexvRtrIfIndex gives the value of vRtrIfIndex for a row in the vRtrIfTable. This row corresponds to the virtual router interface that maps to the vRtrIfGlobalIndex. The combination of a vRtrID and a vRtrIfIndex correspond to a system wide unique vRtrIfGlobalIndex." ::= { vRtrIfGlobalIndexEntry 2 } -- -- Alcatel-Lucent SROS series Virtual Router Interface Proxy Neigbor -- Discovery Table -- -- Augmentation of the vRtrIfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrIfTable, and the augmenting table, -- vRtrIfProxyNDTable. This in effect extends the vRtrIfTable with -- additional columns. Creation (or deletion) of a row in the -- vRtrIfTable results in the same fate for the row in the -- vRtrIfProxyNDTable. -- vRtrIfProxyNDTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfProxyNDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfProxyNDTable provides an extension to the vRtrIfTable. It has an entry for each virtual router interface configured in the system." ::= { tmnxVRtrObjs 38 } vRtrIfProxyNDEntry OBJECT-TYPE SYNTAX VRtrIfProxyNDEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to Proxy Neighbor Discovery for a virtual router interface in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrIfEntry } ::= { vRtrIfProxyNDTable 1 } VRtrIfProxyNDEntry ::= SEQUENCE { vRtrIfProxyNDLocal TruthValue, vRtrIfProxyNDPolicy1 TPolicyStatementNameOrEmpty, vRtrIfProxyNDPolicy2 TPolicyStatementNameOrEmpty, vRtrIfProxyNDPolicy3 TPolicyStatementNameOrEmpty, vRtrIfProxyNDPolicy4 TPolicyStatementNameOrEmpty, vRtrIfProxyNDPolicy5 TPolicyStatementNameOrEmpty } vRtrIfProxyNDLocal OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "If the value of vRtrIfProxyNDLocal is set to 'true', local proxy Neighbor Discovery is enabled, that is, the interface will reply to Neighbor Solicitation requests when both the hosts are on the same subnet. In this case ICMP redirects will be disabled. If the value of vRtrIfProxyNDLocal is set to 'false', the interface will not reply to Neighbor Solicitation requests if both the hosts are on the same subnet." DEFVAL { false } ::= { vRtrIfProxyNDEntry 1 } vRtrIfProxyNDPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyNDPolicy1 specifies the first proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled." DEFVAL { ''H } ::= { vRtrIfProxyNDEntry 2 } vRtrIfProxyNDPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyNDPolicy2 specifies the second proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled." DEFVAL { ''H } ::= { vRtrIfProxyNDEntry 3 } vRtrIfProxyNDPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyNDPolicy3 specifies the third proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled." DEFVAL { ''H } ::= { vRtrIfProxyNDEntry 4 } vRtrIfProxyNDPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyNDPolicy4 specifies the fourth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled." DEFVAL { ''H } ::= { vRtrIfProxyNDEntry 5 } vRtrIfProxyNDPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfProxyNDPolicy5 specifies the fifth proxy ND policy for this interface. This policy determines networks and sources for which proxy ND will be attempted, when local proxy ND is enabled." DEFVAL { ''H } ::= { vRtrIfProxyNDEntry 6 } -- -- Alcatel-Lucent SROS series -- Virtual Router DHCP6 prefix Delegation table -- vRtrIfDHCP6PfxDelegationLstChgd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxDelegationLstChgd indicates the Timestamp of the last change to any row the vRtrIfDHCP6PfxDelegationTable" ::= { tmnxVRtrObjs 39 } vRtrIfDHCP6PfxDelegationTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfDHCP6PfxDelegationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table vRtrIfDHCP6PfxDelegationTable is used to configure the feature of automated delegation of IPv6 prefixes using DHCP6. This feature is intended for delegating a long-lived prefix from a delegating router to a requesting router, where the delegating router does not require knowledge about the topology of the links in the network to which the prefixes will be assigned." ::= { tmnxVRtrObjs 40 } vRtrIfDHCP6PfxDelegationEntry OBJECT-TYPE SYNTAX VRtrIfDHCP6PfxDelegationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a delegated IPv6 prefix. Entries can be created and deleted via SNMP SET operations. Creation requires a SET request containing the vRtrRowStatus." INDEX { vRtrID, vRtrIfIndex, vRtrIfDHCP6PfxdPrefix, vRtrIfDHCP6PfxdPrefixLen } ::= { vRtrIfDHCP6PfxDelegationTable 1 } VRtrIfDHCP6PfxDelegationEntry ::= SEQUENCE { vRtrIfDHCP6PfxdPrefix InetAddressIPv6, vRtrIfDHCP6PfxdPrefixLen InetAddressPrefixLength, vRtrIfDHCP6PfxdRowStatus RowStatus, vRtrIfDHCP6PfxdLastChanged TimeStamp, vRtrIfDHCP6PfxdDUID OCTET STRING, vRtrIfDHCP6PfxdIAID Unsigned32, vRtrIfDHCP6PfxdPrefLifetime Unsigned32, vRtrIfDHCP6PfxdValidLifetime Unsigned32 } vRtrIfDHCP6PfxdPrefix OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdPrefix specifies, together with the object vRtrIfDHCP6PfxdPrefixLen the ipv6 prefix that will be delegated." ::= { vRtrIfDHCP6PfxDelegationEntry 1 } vRtrIfDHCP6PfxdPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdPrefixLen specifies, together with the object vRtrIfDHCP6PfxdPrefix the ipv6 prefix that will be delegated by this system." ::= { vRtrIfDHCP6PfxDelegationEntry 2 } vRtrIfDHCP6PfxdRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table. The only allowed values for this object are: active(1), createAndGo(4), and destroy(6)." ::= { vRtrIfDHCP6PfxDelegationEntry 3 } vRtrIfDHCP6PfxdLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfDHCP6PfxdLastChanged indicates the sysUpTime when any object of the row is last changed." ::= { vRtrIfDHCP6PfxDelegationEntry 4 } vRtrIfDHCP6PfxdDUID OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdDUID specifies the ID of the requesting router. If set to a non zero value the prefix defined in this row will only be delegated to this router. If set to zero, the prefix will be delegated to any requesting router." DEFVAL { ''H } -- the empty string ::= { vRtrIfDHCP6PfxDelegationEntry 6 } vRtrIfDHCP6PfxdIAID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdIAID specifies the IAID from the requesting router that needs to match in order to delegate the prefix defined in this row.If set to 0 no match on the received IAID is done." DEFVAL { 0 } ::= { vRtrIfDHCP6PfxDelegationEntry 7 } vRtrIfDHCP6PfxdPrefLifetime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdPrefLifetime specifies the time in seconds that this prefix remains preferred. The value of vRtrIfDHCP6PfxdPrefLifetime cannot be bigger then the value of vRtrIfDHCP6PfxdValidLifetime. The value 4294967295 is considered equal to infinity." DEFVAL { 604800 } -- 7 days ::= { vRtrIfDHCP6PfxDelegationEntry 8 } vRtrIfDHCP6PfxdValidLifetime OBJECT-TYPE SYNTAX Unsigned32 (0..4294967295) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIfDHCP6PfxdValidLifetime specifies the time in seconds that the prefix is valid. The value 4294967295 is considered equal to infinity." DEFVAL { 2592000 } -- 30 days ::= { vRtrIfDHCP6PfxDelegationEntry 9 } -- -- Alcatel-Lucent SROS series Virtual Router DHCP6 Statistics Table -- vRtrDHCP6DropStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrDHCP6DropStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrDHCP6DropStatTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 41 } vRtrDHCP6DropStatEntry OBJECT-TYPE SYNTAX VRtrDHCP6DropStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of DHCP6 drop reason statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." INDEX { vRtrID, vRtrDHCP6DropStatReason } ::= { vRtrDHCP6DropStatTable 1 } VRtrDHCP6DropStatEntry ::= SEQUENCE { vRtrDHCP6DropStatReason INTEGER, vRtrDHCP6DropStatLastCleared TimeStamp, vRtrDHCP6DropStatPktsDropped Gauge32 } vRtrDHCP6DropStatReason OBJECT-TYPE SYNTAX INTEGER { none ( 0 ), srcOperDown ( 1 ), dstOperDown ( 2 ), rlyReplyOnClientItf ( 3 ), hopCount ( 4 ), badRelayedMsg ( 5 ), clientItfNotFound ( 6 ), noMemory ( 7 ), noGlobalPfx ( 8 ), noSrcIp ( 9 ), noRteToServer ( 10 ), subMgmtUpdFail ( 11 ), relayForw ( 12 ), msgTooSmall ( 13 ), msgNotForServer ( 14 ), noServerId ( 15 ), noClientId ( 16 ), serverIdInClientMsg ( 17 ), wrongServerId ( 18 ), illegalUnicast ( 19 ), illegalSrcIp ( 20 ), pdMsgNotSupported ( 21 ), nbrAddrsExceeded ( 22 ), clientMacNotResolved ( 23 ), illegalAssignedAddr ( 24 ), msgEncodingError ( 25 ), rcoMsgNotSupported ( 26 ), iaInInfoRequest ( 27 ), noIaInClientMsg ( 28 ), noAddrInConfirmMsg ( 29 ), noRelayServers ( 30 ), hostLockout ( 31 ), noLinkAddress ( 32 ) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object vRtrDHCP6DropStatReason indicates the drop reason for which the object vRtrDHCP6DropStatPktsDropped contains the counter. none srcOperDown Dhcp6 oper state is not Up on src itf dstOperDown Dhcp6 oper state is not Up on dst itf rlyReplyOnClientItf Relay Reply Msg on Client Itf hopCount Hop Count Limit reached badRelayedMsg Missing Relay Msg option, or illegal msg type clientItfNotFound Unable to determine destinatinon client Itf noMemory Out of Memory noGlobalPfx No global Pfx on Client Itf noSrcIp Unable to determine src Ip Addr noRteToServer No route to server subMgmtUpdFail Subscr. Mgmt. Update failed relayForw Received Relay Forw Message msgTooSmall Packet too small to contain valid dhcp6 msg msgNotForServer Server cannot respond to this message noServerId No Server Id option in msg from server noClientId No Client Id option in msg from client serverIdInClientMsg Server Id option in client msg wrongServerId Server DUID in client msg does not match ours illegalUnicast Client sent message to unicast while not allowed illegalSrcIp Client sent message with illegal src Ip pdMsgNotSupported Client message type not supported in pfx delegation nbrAddrsExceeded Nbr of addrs or pfxs exceeds allowed maximum in msg clientMacNotResolved Unable to resolve client's mac address illegalAssignedAddr The client was assigned an illegal address msgEncodingError Illegal pfx length in a IA_PREFIX option rcoMsgNotSupported Client message type not supported on rco interfaces iaInInfoRequest Info request holds IA options noIaInClientMsg Client msg holds no IA options noAddrInConfirmMsg No addresses in client confirm msg noRelayServers No relay servers configured hostLockout Blocked by host lockout noLinkAddress No link address available " ::= { vRtrDHCP6DropStatEntry 1 } vRtrDHCP6DropStatLastCleared OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6DropStatLastCleared indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized." ::= { vRtrDHCP6DropStatEntry 2 } vRtrDHCP6DropStatPktsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6DropStatPktsDropped indicates the number of DHCP6 packets were dropped for the reason described in vRtrDHCP6DropStatReason." ::= { vRtrDHCP6DropStatEntry 3 } -- -- Alcatel-Lucent SROS series Virtual Router DHCP6 msg type Statistics Table -- vRtrDHCP6MsgStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrDHCP6MsgStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrDHCP6MsgStatTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 42 } vRtrDHCP6MsgStatEntry OBJECT-TYPE SYNTAX VRtrDHCP6MsgStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of counters for each DHCP6 message type for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." INDEX { vRtrID, vRtrDHCP6MsgStatsMsgType } ::= { vRtrDHCP6MsgStatTable 1 } VRtrDHCP6MsgStatEntry ::= SEQUENCE { vRtrDHCP6MsgStatsMsgType TmnxDHCP6MsgType, vRtrDHCP6MsgStatsLstClrd TimeStamp, vRtrDHCP6MsgStatsRcvd Gauge32, vRtrDHCP6MsgStatsSent Gauge32, vRtrDHCP6MsgStatsDropped Gauge32 } vRtrDHCP6MsgStatsMsgType OBJECT-TYPE SYNTAX TmnxDHCP6MsgType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The object vRtrDHCP6MsgStatsMsgType indicates the DHCP6 message type for which statistics are kept on a per vrtr basis." ::= { vRtrDHCP6MsgStatEntry 1 } vRtrDHCP6MsgStatsLstClrd OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6MsgStatsLstClrd indicates the sysUpTime when the counters of this row were last reset. A value of zero for this object indicates that the counters have not been reset since the system has last been initialized." ::= { vRtrDHCP6MsgStatEntry 2 } vRtrDHCP6MsgStatsRcvd OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6MsgStatsRcvd indicates the number of DHCP6 packets were received of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType." ::= { vRtrDHCP6MsgStatEntry 3 } vRtrDHCP6MsgStatsSent OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6MsgStatsSent indicates the number of DHCP6 packets were sent of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType." ::= { vRtrDHCP6MsgStatEntry 4 } vRtrDHCP6MsgStatsDropped OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDHCP6MsgStatsDropped indicates the number of DHCP6 packets were dropped of the DHCP6 message type indicated by vRtrDHCP6MsgStatsMsgType." ::= { vRtrDHCP6MsgStatEntry 5 } -- -- Virtual Router Interface IPCP table -- Use of AUGMENTS clause implies a one-to-one dependent relationship -- between the base table, vRtrIfTable, and the augmenting table, -- vRtrIfIpcpTable. This in effect extends the vRtrIfTable with -- additional columns. Creation (or deletion) of a row in the -- vRtrIfTable results in the same fate for the row in the -- vRtrIfIpcpTable. -- vRtrIfIpcpTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfIpcpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfIpcpTable table contains the configuration for IPCP interface configuration on the vRtrIfEntry with the same indices." ::= { tmnxVRtrObjs 43 } vRtrIfIpcpEntry OBJECT-TYPE SYNTAX VRtrIfIpcpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the IPCP configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted." AUGMENTS { vRtrIfEntry } ::= { vRtrIfIpcpTable 1 } VRtrIfIpcpEntry ::= SEQUENCE { vRtrIfIpcpPeerAddrType InetAddressType, vRtrIfIpcpPeerAddr InetAddress, vRtrIfIpcpPriDnsAddrType InetAddressType, vRtrIfIpcpPriDnsAddr InetAddress, vRtrIfIpcpSecDnsAddrType InetAddressType, vRtrIfIpcpSecDnsAddr InetAddress } vRtrIfIpcpPeerAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpPeerAddrType specifies the type of vRtrIfIpcpPeerAddr, the remote peer's IP address. vRtrIfIpcpPeerAddrType can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPeerAddrType is unknown, the value of vRtrIfIpcpPeerAddr is assumed to be of size 0." DEFVAL { unknown } ::= { vRtrIfIpcpEntry 1 } vRtrIfIpcpPeerAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpPeerAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the remote peer's IP address. The type of this address is specified by the value of vRtrIfIpcpPeerAddrType vRtrIfIpcpPeerAddr can be set to on-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)" DEFVAL { ''H } ::= { vRtrIfIpcpEntry 2 } vRtrIfIpcpPriDnsAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpPriDnsAddrType specifies the type of vRtrIfIpcpPriDnsAddr, the IP address of the primary DNS to be used by the remote peer. vRtrIfIpcpPriDnsAddrType can be set ito non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpPriDnsAddrType is unknown, the value of vRtrIfIpcpPriDnsAddr is assumed to be of size 0." DEFVAL { unknown } ::= { vRtrIfIpcpEntry 3 } vRtrIfIpcpPriDnsAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpPriDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the primary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpPriDnsAddrType vRtrIfIpcpPriDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)" DEFVAL { ''H } ::= { vRtrIfIpcpEntry 4 } vRtrIfIpcpSecDnsAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpSecDnsAddrType specifies the type of vRtrIfIpcpSecDnsAddr, the IP address of the secondary DNS to be used by the remote peer. vRtrIfIpcpSecDnsAddrType can be set to non-deffault only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6) When the value of vRtrIfIpcpSecDnsAddrType is unknown, the value of vRtrIfIpcpSecDnsAddr is assumed to be of size 0." DEFVAL { unknown } ::= { vRtrIfIpcpEntry 5 } vRtrIfIpcpSecDnsAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpcpSecDnsAddr specifies the IP address that will be exchanged by IPCP, if applicable on a given interface, to configure the secondary DNS's IP address on the remote peer. The type of this address is specified by the value of vRtrIfIpcpSecDnsAddrType. vRtrIfIpcpSecDnsAddr can be set to non-default only when the following rules are met for objects in vRtrIfEntry with the same indices: - The value of vRtrIfType is set to serviceIes(3) or serviceVprn(5) - The value of tmnxPortEncapType in tmnxPortEntry indexed using the value of vRtrIfPortID is set to unknown (0) or nullEncap (1) or ipcpEncap (6)" DEFVAL { ''H } ::= { vRtrIfIpcpEntry 6 } -- -- Alcatel-Lucent SROS series -- Virtual Router Static Route CPE Check Statistics Table -- vRtrInetStatRteCpeChkStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetStatRteCpeChkStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrInetStatRteCpeChkStatsTable has an entry for each entry in the vRtrInetStaticRouteTable that has a non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects." ::= { tmnxVRtrObjs 44 } vRtrInetStatRteCpeChkStatsEntry OBJECT-TYPE SYNTAX VRtrInetStatRteCpeChkStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of Customer-Provided Equipment (CPE) availability statistics for a virtual router static route in the system with non-default values set for the vRtrInetStaticRouteCpeAddrType and vRtrInetStaticRouteCpeAddr objects. Entries cannot be created and deleted via SNMP SET operations." INDEX { vRtrID, vRtrInetStaticRouteDestType, vRtrInetStaticRouteDest, vRtrInetStaticRouteDestPfxLen, vRtrInetStaticRouteIndex } ::= { vRtrInetStatRteCpeChkStatsTable 1 } VRtrInetStatRteCpeChkStatsEntry ::= SEQUENCE { vRtrInetStatRteCpeChkUpTime TimeTicks, vRtrInetStatRteCpeChkInPktCnt Counter32, vRtrInetStatRteCpeChkOutPktCnt Counter32, vRtrInetStatRteCpeChkDownTrans Gauge32, vRtrInetStatRteCpeChkUpTrans Gauge32, vRtrInetStatRteCpeChkTTL Unsigned32 } vRtrInetStatRteCpeChkUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkUpTime indicates how long (in hundredths of a second) that the CPE has been available." ::= { vRtrInetStatRteCpeChkStatsEntry 1 } vRtrInetStatRteCpeChkInPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkInPktCnt indicates the number of echo-reply packets received." ::= { vRtrInetStatRteCpeChkStatsEntry 2 } vRtrInetStatRteCpeChkOutPktCnt OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkOutPktCnt indicates the number of echo-request packets sent." ::= { vRtrInetStatRteCpeChkStatsEntry 3 } vRtrInetStatRteCpeChkDownTrans OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkDownTrans indicates the number of times the CPE has transitioned to the unavailable state." ::= { vRtrInetStatRteCpeChkStatsEntry 4 } vRtrInetStatRteCpeChkUpTrans OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkUpTrans indicates the number of times the CPE has transitioned to the available state." ::= { vRtrInetStatRteCpeChkStatsEntry 5 } vRtrInetStatRteCpeChkTTL OBJECT-TYPE SYNTAX Unsigned32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetStatRteCpeChkTTL indicates the time, in seconds, before the CPE will be declared down. Upon receipt of an echo reply, it has the value of vRtrInetStaticRouteCpeInterval * vRtrInetStaticRouteCpeDropCnt and is decremented by 1 every second." ::= { vRtrInetStatRteCpeChkStatsEntry 6 } -- -- Application Id -> DSCP value mapping table -- tmnxDscpAppTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDscpAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxVRtrObjs 45 } tmnxDscpAppTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxDscpAppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxDscpAppTable has an entry for each application to Differential Services Code Point (DSCP) mapping in a virtual routing context on this system." ::= { tmnxVRtrObjs 46 } tmnxDscpAppEntry OBJECT-TYPE SYNTAX TmnxDscpAppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a mapping from an application to a DSCP value for particular virtual routing context. Entries are created at system initialization." INDEX { vRtrID, tmnxDscpAppId } ::= { tmnxDscpAppTable 1} TmnxDscpAppEntry ::= SEQUENCE { tmnxDscpAppId TDSCPAppId, tmnxDscpAppLastChanged TimeStamp, tmnxDscpAppDscpValue TDSCPValueOrNone } tmnxDscpAppId OBJECT-TYPE SYNTAX TDSCPAppId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxDscpAppId indicates the DSCP application identifier for a protocol on the Alcatel-Lucent SROS router which generates control traffic over IP. The values of 'cflowd (2)', 'ptp (29)' and 'igmp-reporter (30)' are applicable to the transport Router context only (vRtrID = 1)." ::= { tmnxDscpAppEntry 1 } tmnxDscpAppLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDscpAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxDscpAppEntry 2 } tmnxDscpAppDscpValue OBJECT-TYPE SYNTAX TDSCPValueOrNone MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxDscpAppDscpValue specifies a DSCP Value to assign to the traffic generated by the application specified by tmnxDscpAppId. A value of -1 specifies that no explicit DSCP re-marking will be done for the traffic generated by the application specified by tmnxDscpAppId. The default value is protocol specific." ::= { tmnxDscpAppEntry 3 } -- -- DSCP Name -> Forwarding Class mapping table -- tmnxDscpFCTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDscpFCTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDscpFCTable. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxVRtrObjs 47 } tmnxDscpFCTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxDscpFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxDscpFCTable has an entry for each mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in a virtual routing context on this system." ::= { tmnxVRtrObjs 48 } tmnxDscpFCEntry OBJECT-TYPE SYNTAX TmnxDscpFCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a mapping between a DSCP value and a Forwarding Class for self-generated protocol traffic in particular virtual routing context. Entries are created at system initialization." INDEX { vRtrID, tmnxDscpFCDscpValue } ::= { tmnxDscpFCTable 1} TmnxDscpFCEntry ::= SEQUENCE { tmnxDscpFCDscpValue TDSCPValue, tmnxDscpFCLastChanged TimeStamp, tmnxDscpFCValue TFCType } tmnxDscpFCDscpValue OBJECT-TYPE SYNTAX TDSCPValue MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxDscpFCDscpValue specifies a DSCP value which will be mapped to the Forwarding Class specified by tmnxDscpFCValue." ::= { tmnxDscpFCEntry 1 } tmnxDscpFCLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDscpFCLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxDscpFCEntry 3 } tmnxDscpFCValue OBJECT-TYPE SYNTAX TFCType MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxDscpFCValue specifies the Forwarding Class value for this mapping entry. The default value is best effort, which is specified by a value of 0." DEFVAL { be } ::= { tmnxDscpFCEntry 4 } -- -- Application Id -> 802.1p value mapping table -- tmnxDot1pAppTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDot1pAppTableLastChanged indicates the sysUpTime at the time of the last modification of tmnxDot1pAppTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxVRtrObjs 49 } tmnxDot1pAppTable OBJECT-TYPE SYNTAX SEQUENCE OF TmnxDot1pAppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The tmnxDot1pAppTable has an entry for each application to IEEE 802.1p priority (Dot1p) mapping in a virtual routing context on this system." ::= { tmnxVRtrObjs 50 } tmnxDot1pAppEntry OBJECT-TYPE SYNTAX TmnxDot1pAppEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row represents a mapping from an application to a Dot1p value for particular virtual routing context. Entries are created at system initialization." INDEX { vRtrID, tmnxDot1pAppId } ::= { tmnxDot1pAppTable 1} TmnxDot1pAppEntry ::= SEQUENCE { tmnxDot1pAppId TDot1pAppId, tmnxDot1pAppLastChanged TimeStamp, tmnxDot1pAppValue Dot1PPriority } tmnxDot1pAppId OBJECT-TYPE SYNTAX TDot1pAppId MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of tmnxDot1pAppId indicates the Dot1p application identifier for a Layer-2 protocol on the Alcatel-Lucent SROS router." ::= { tmnxDot1pAppEntry 1 } tmnxDot1pAppLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of tmnxDot1pAppLastChanged indicates the sysUpTime at the time of the last modification of this entry. If no changes were made to the entry since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxDot1pAppEntry 2 } tmnxDot1pAppValue OBJECT-TYPE SYNTAX Dot1PPriority MAX-ACCESS read-write STATUS current DESCRIPTION "The value of tmnxDot1pAppValue specifies a Dot1p value to assign to the traffic generated by the application specified by tmnxDot1pAppId. The default value is protocol specific." ::= { tmnxDot1pAppEntry 3 } -- -- Alcatel-Lucent SROS series Virtual Router FIB Statistics Table -- vRtrFibStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrFibStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrStatTable has an entry for IOM card configured in the system." ::= { tmnxVRtrObjs 51 } vRtrFibStatEntry OBJECT-TYPE SYNTAX VRtrFibStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of summarized statistics for each virtual router on an IOM card in the system. Entries cannot be created and deleted via SNMP SET operations." INDEX { tmnxChassisIndex, tmnxCardSlotNum } ::= { vRtrFibStatTable 1 } VRtrFibStatEntry ::= SEQUENCE { vRtrFibStatStaticRoutes Gauge32, vRtrFibStatDirectRoutes Gauge32, vRtrFibStatHostRoutes Gauge32, vRtrFibStatBGPRoutes Gauge32, vRtrFibStatBGPVpnRoutes Gauge32, vRtrFibStatOSPFRoutes Gauge32, vRtrFibStatISISRoutes Gauge32, vRtrFibStatRIPRoutes Gauge32, vRtrFibStatAggrRoutes Gauge32, vRtrFibStatSubMgmtRoutes Gauge32, vRtrFibStatManagedRoutes Gauge32, vRtrFibStatV6StaticRoutes Gauge32, vRtrFibStatV6DirectRoutes Gauge32, vRtrFibStatV6HostRoutes Gauge32, vRtrFibStatV6BGPRoutes Gauge32, vRtrFibStatV6BGPVpnRoutes Gauge32, vRtrFibStatV6OSPFRoutes Gauge32, vRtrFibStatV6ISISRoutes Gauge32, vRtrFibStatV6RIPRoutes Gauge32, vRtrFibStatV6AggrRoutes Gauge32, vRtrFibStatV6SubMgmtRoutes Gauge32, vRtrFibStatV6ManagedRoutes Gauge32, vRtrFibStatOverflows Gauge32, vRtrFibStatAlarmCount Gauge32, vRtrFibStatLastAlarmTime TimeStamp, vRtrFibStatHighUtilization TruthValue, vRtrFibStatMobileHostRoutes Gauge32, vRtrFibStatV6MobileHostRoutes Gauge32, vRtrFibStatVPNLeakRoutes Gauge32, vRtrFibStatV6VPNLeakRoutes Gauge32, vRtrFibStatNatRoutes Gauge32, vRtrFibStatV6NatRoutes Gauge32 } vRtrFibStatStaticRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatStaticRoutes indicates current static route counts for the virtual router." ::= { vRtrFibStatEntry 1 } vRtrFibStatDirectRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatDirectRoutes indicates current direct route counts for the virtual router." ::= { vRtrFibStatEntry 2 } vRtrFibStatHostRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatHostRoutes indicates current host route counts for the virtual router." ::= { vRtrFibStatEntry 3 } vRtrFibStatBGPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatBGPRoutes indicates current BGP route counts for the virtual router." ::= { vRtrFibStatEntry 4 } vRtrFibStatBGPVpnRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatBGPVpnRoutes indicates current BGP VPN route counts for the virtual router." ::= { vRtrFibStatEntry 5 } vRtrFibStatOSPFRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatOSPFRoutes indicates current OSPF route counts for the virtual router." ::= { vRtrFibStatEntry 6 } vRtrFibStatISISRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatISISRoutes indicates current ISIS route counts for the virtual router." ::= { vRtrFibStatEntry 7 } vRtrFibStatRIPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatRIPRoutes indicates current RIP route counts for the virtual router." ::= { vRtrFibStatEntry 8 } vRtrFibStatAggrRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatAggrRoutes indicates current aggregate route counts for the virtual router." ::= { vRtrFibStatEntry 9 } vRtrFibStatSubMgmtRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatSubMgmtRoutes indicates current Sub-management route counts for the virtual router." ::= { vRtrFibStatEntry 10 } vRtrFibStatManagedRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatManagedRoutes indicates current managed route counts for the virtual router." ::= { vRtrFibStatEntry 11 } vRtrFibStatV6StaticRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6StaticRoutes indicates current static route counts for the virtual router." ::= { vRtrFibStatEntry 12 } vRtrFibStatV6DirectRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6DirectRoutes indicates current direct route counts for the virtual router." ::= { vRtrFibStatEntry 13 } vRtrFibStatV6HostRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6HostRoutes indicates current host route counts for the virtual router." ::= { vRtrFibStatEntry 14 } vRtrFibStatV6BGPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6BGPRoutes indicates current BGP route counts for the virtual router." ::= { vRtrFibStatEntry 15 } vRtrFibStatV6BGPVpnRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6BGPVpnRoutes indicates current BGP VPN route counts for the virtual router." ::= { vRtrFibStatEntry 16 } vRtrFibStatV6OSPFRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6OSPFRoutes indicates current OSPF route counts for the virtual router." ::= { vRtrFibStatEntry 17 } vRtrFibStatV6ISISRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6ISISRoutes indicates current ISIS route counts for the virtual router." ::= { vRtrFibStatEntry 18 } vRtrFibStatV6RIPRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6RIPRoutes indicates current RIP route counts for the virtual router." ::= { vRtrFibStatEntry 19 } vRtrFibStatV6AggrRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6AggrRoutes indicates current aggregate route counts for the virtual router." ::= { vRtrFibStatEntry 20 } vRtrFibStatV6SubMgmtRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6SubMgmtRoutes indicates current Sub-management route counts for the virtual router." ::= { vRtrFibStatEntry 21 } vRtrFibStatV6ManagedRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6ManagedRoutes indicates current managed route counts for the virtual router." ::= { vRtrFibStatEntry 22 } vRtrFibStatOverflows OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatOverflows indicates the number of times the FIB has run out of space." ::= { vRtrFibStatEntry 23 } vRtrFibStatAlarmCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatAlarmCount indicates the number of times the FIB has raised an alarm due to high FIB usage." ::= { vRtrFibStatEntry 24 } vRtrFibStatLastAlarmTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatLastAlarmTime indicates the last time a high FIB usage alarm was raised." ::= { vRtrFibStatEntry 25 } vRtrFibStatHighUtilization OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatHighUtilization indicates whether or not the FIB on the IOM is experiences persistent high occupancy." ::= { vRtrFibStatEntry 26 } vRtrFibStatMobileHostRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrFibStatMobileHostRoutes indicates the current IPv4 Mobile Host route counts for the virtual router." ::= { vRtrFibStatEntry 27 } vRtrFibStatV6MobileHostRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrFibStatV6MobileHostRoutes indicates the current IPv6 Mobile Host route counts for the virtual router." ::= { vRtrFibStatEntry 28 } vRtrFibStatVPNLeakRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatVPNLeakRoutes indicates current VPN Leak route counts for the virtual router." ::= { vRtrFibStatEntry 29 } vRtrFibStatV6VPNLeakRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6VPNLeakRoutes indicates current IPv6 VPN Leak route counts for the virtual router." ::= { vRtrFibStatEntry 30 } vRtrFibStatNatRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatNatRoutes indicates current NAT route counts for the virtual router." ::= { vRtrFibStatEntry 33 } vRtrFibStatV6NatRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatV6NatRoutes indicates current NAT IPv6 route counts for the virtual router." ::= { vRtrFibStatEntry 34 } -- -- Alcatel-Lucent SROS series Virtual Router FIB Next-Hop Statistics Table -- vRtrFibStatNextHopTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrFibStatNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrFibStatNextHopTable has an entry for each IOM in the system." ::= { tmnxVRtrObjs 52 } vRtrFibStatNextHopEntry OBJECT-TYPE SYNTAX VRtrFibStatNextHopEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for an IOM card in the system. Entries cannot be created and deleted via SNMP SET operations." INDEX { tmnxChassisIndex, tmnxCardSlotNum } ::= { vRtrFibStatNextHopTable 1 } VRtrFibStatNextHopEntry ::= SEQUENCE { vRtrFibStatNextHopIPActive Gauge32, vRtrFibStatNextHopIPAvailable Gauge32, vRtrFibStatNextHopTunnelActive Gauge32, vRtrFibStatNextHopTunnelAvailable Gauge32 } vRtrFibStatNextHopIPActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatNextHopIPActive indicates current active IP next-hop counts for the FIB on the IOM." ::= { vRtrFibStatNextHopEntry 1 } vRtrFibStatNextHopIPAvailable OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatNextHopIPAvailable indicates the available IP next-hop counts for the FIB on the IOM." ::= { vRtrFibStatNextHopEntry 2 } vRtrFibStatNextHopTunnelActive OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatNextHopTunnelActive indicates current active Tunnel next-hop counts for the FIB on the IOM." ::= { vRtrFibStatNextHopEntry 3 } vRtrFibStatNextHopTunnelAvailable OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "vRtrFibStatNextHopTunnelAvailable indicates the available Tunnel next-hop counts for the FIB on the IOM." ::= { vRtrFibStatNextHopEntry 4 } vRtrInetAllCidrRouteTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetAllCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrInetAllCidrRouteTable provides an extension of the inetCidrRouteTable in the IP-FORWARD-MIB, by adding two indexes and displaying both active and inactive CIDR routes." ::= { tmnxVRtrObjs 53 } vRtrInetAllCidrRouteEntry OBJECT-TYPE SYNTAX VRtrInetAllCidrRouteEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrInetAllCidrRouteTable represents an entry in the IP CIDR route table for the Alcatel-Lucent SROS series." INDEX { inetCidrRouteDestType, inetCidrRouteDest, inetCidrRoutePfxLen, inetCidrRoutePolicy, inetCidrRouteProto, vRtrInetAllCidrRouteProtoID, inetCidrRouteNextHopType, inetCidrRouteNextHop } ::= { vRtrInetAllCidrRouteTable 1 } VRtrInetAllCidrRouteEntry ::= SEQUENCE { vRtrInetAllCidrRouteProtoID Unsigned32, vRtrInetAllCidrRouteIfIndex InterfaceIndexOrZero, vRtrInetAllCidrRouteType INTEGER, vRtrInetAllCidrRouteAge Gauge32, vRtrInetAllCidrRouteNextHopAS InetAutonomousSystemNumber, vRtrInetAllCidrRouteMetric1 Integer32, vRtrInetAllCidrRouteMetric2 Integer32, vRtrInetAllCidrRouteMetric3 Integer32, vRtrInetAllCidrRouteMetric4 Integer32, vRtrInetAllCidrRouteMetric5 Integer32, vRtrInetAllCidrRoutePreference Unsigned32, vRtrInetAllCidrRouteMetric Unsigned32, vRtrInetAllCidrRouteIfVRtrId TmnxVRtrIDOrZero, vRtrInetAllCidrRouteIsActive TruthValue, vRtrInetAllCidrRouteBkupFlags INTEGER, vRtrInetAllCidrRouteBkupNHopType InetAddressType, vRtrInetAllCidrRouteBkupNextHop InetAddress, vRtrInetAllCidrRouteBkupMetric Unsigned32, vRtrInetAllCidrRouteNHopRepCount Unsigned32, vRtrInetAllCidrRtNextHopType TmnxInetCidrNextHopType, vRtrInetAllCidrRtNextHopOwner TmnxInetCidrNextHopOwner, vRtrInetAllCidrRtNHOwnerAuxInfo Unsigned32, vRtrInetAllCidrRtBkupNHType TmnxInetCidrNextHopType, vRtrInetAllCidrRtBkupNHOwner TmnxInetCidrNextHopOwner, vRtrInetAllCidrRtBkupNHOwnAxInfo Unsigned32 } vRtrInetAllCidrRouteProtoID OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional table index provided to distinguish between multiple routes to same destination with the same inetCidrRouteProto index." ::= { vRtrInetAllCidrRouteEntry 1 } vRtrInetAllCidrRouteIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteIfIndex indicates the ifIndex value which identifies the local interface through which the next hop of this route should be reached. A value of 0 is valid and represents the scenario where no interface is specified." ::= { vRtrInetAllCidrRouteEntry 2 } vRtrInetAllCidrRouteType OBJECT-TYPE SYNTAX INTEGER { other (1), -- not specified by this MIB reject (2), -- route which discards traffic and -- returns ICMP notification local (3), -- local interface remote (4), -- remote destination blackhole(5) -- route which discards traffic -- silently } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteType indicates the type of route. Note that 'local' refers to a route for which the next hop is the final destination; 'remote' refers to a route for which the next hop is not the final destination. Routes which do not result in traffic forwarding or rejection should not be displayed even if the implementation keeps them stored internally. 'reject' refers to a route which, if matched, discards the message as unreachable and returns a notification (e.g. ICMP error) to the message sender. This is used in some protocols as a means of correctly aggregating routes. 'blackhole' refers to a route which, if matched, discards the message silently." ::= { vRtrInetAllCidrRouteEntry 3 } vRtrInetAllCidrRouteAge OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteAge indicates the number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was learned." ::= { vRtrInetAllCidrRouteEntry 4 } vRtrInetAllCidrRouteNextHopAS OBJECT-TYPE SYNTAX InetAutonomousSystemNumber MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteNextHopAS indicates the Autonomous System Number of the Next Hop. The semantics of this object are determined by the routing- protocol specified in the route's inetCidrRouteProto index. When this object is unknown or not relevant its value should be set to zero." ::= { vRtrInetAllCidrRouteEntry 5 } vRtrInetAllCidrRouteMetric1 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteMetric1 indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol indicated in the route's inetCidrRouteProto index. If this metric is not used, its value will be -1." ::= { vRtrInetAllCidrRouteEntry 6 } vRtrInetAllCidrRouteMetric2 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteMetric2 indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol indicated in the route's inetCidrRouteProto index. If this metric is not used, its value will be -1." ::= { vRtrInetAllCidrRouteEntry 7 } vRtrInetAllCidrRouteMetric3 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteMetric3 indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol indicated in the route's inetCidrRouteProto index. If this metric is not used, its value will be -1." ::= { vRtrInetAllCidrRouteEntry 8 } vRtrInetAllCidrRouteMetric4 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteMetric4 indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol indicated in the route's inetCidrRouteProto index. If this metric is not used, its value will be -1." ::= { vRtrInetAllCidrRouteEntry 9 } vRtrInetAllCidrRouteMetric5 OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteMetric5 indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol indicated in the route's inetCidrRouteProto index. If this metric is not used, its value will be -1." ::= { vRtrInetAllCidrRouteEntry 10 } vRtrInetAllCidrRoutePreference OBJECT-TYPE SYNTAX Unsigned32 (0..255) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRoutePreference indicates the priority of this static route versus the routes from different sources such as BGP or OSPF etc, when ipCidrRouteProto has a value of 'netmgmt' to indicate that this entry is a static route. Different protocols should not be configured with the same preference, if this occurs the tiebreaker is determined per the default preference value as defined in the table below. If multiple routes are learned with an identical preference using the same protocol, the lowest cost is used. If multiple routes are learned with an identical preference using the same protocol and the costs (metrics) are equal, then the decision as to what route to use is determined by the configuration of the ecmp command. Default preferences: Route Type Preference Configurable ---------- ---------- ------------ Direct attached 0 no Static-route 5 yes MPLS (post FCS) 7 OSPF Internal routes 10 no OSPF External 150 yes BGP 170 yes " ::= { vRtrInetAllCidrRouteEntry 11 } vRtrInetAllCidrRouteMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteMetric indicates the primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value." ::= { vRtrInetAllCidrRouteEntry 12 } vRtrInetAllCidrRouteIfVRtrId OBJECT-TYPE SYNTAX TmnxVRtrIDOrZero MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteIfVRtrId indicates the virtual router instance of the egress interface defined by vRtrInetAllCidrRouteIfIndex. This object is valid only for subscriber management routes. For all other route types, this object will have a value of zero." ::= { vRtrInetAllCidrRouteEntry 13 } vRtrInetAllCidrRouteIsActive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteIsActive indicates whether the this route is the active route for this destination in the IP CIDR route table." ::= { vRtrInetAllCidrRouteEntry 14 } vRtrInetAllCidrRouteBkupFlags OBJECT-TYPE SYNTAX INTEGER { none (0), -- next-hop not specified hasLfa (1), -- next-hop has loop-free-alternate (LFA) hasBackup (2), -- route has a backup next-hop isBackup (3) -- route is a backup next-hop } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteBkupFlags indicates the presence or absence of LFA next-hops and backup routes. 'none' indicates that no next-hop is present. 'hasLfa' indicates that an LFA next-hop is present in addition to the regular next-hop. 'hasBackup' indicates that this route has a backup route. 'isBackup' indicates that this route is a backup route to another route with the same prefix." ::= { vRtrInetAllCidrRouteEntry 15 } vRtrInetAllCidrRouteBkupNHopType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteBkupNHopType indicates the IP address type of vRtrInetAllCidrRouteBkupNextHop. The value of vRtrInetAllCidrRouteBkupNHopType is only valid when vRtrInetAllCidrRouteBkupFlags has a value of 'hasLfa'." ::= { vRtrInetAllCidrRouteEntry 16 } vRtrInetAllCidrRouteBkupNextHop OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteBkupNextHop indicates the IP address of a backup next-hop. The value of vRtrInetAllCidrRouteBkupNextHop is only valid when vRtrInetAllCidrRouteBkupFlags has a value of 'hasLfa'." ::= { vRtrInetAllCidrRouteEntry 17 } vRtrInetAllCidrRouteBkupMetric OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteBkupMetric indicates the routing metric for a backup route. The semantics of this metric are determined by the routing-protocol specified in the route's ipCidrRouteProto value. The value of vRtrInetAllCidrRouteBkupMetric is only valid when vRtrInetAllCidrRouteBkupFlags has a value of 'hasLfa'." ::= { vRtrInetAllCidrRouteEntry 18 } vRtrInetAllCidrRouteNHopRepCount OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRouteNHopRepCount indicates the number of times the next-hop repeats for a particular route." ::= { vRtrInetAllCidrRouteEntry 19 } vRtrInetAllCidrRtNextHopType OBJECT-TYPE SYNTAX TmnxInetCidrNextHopType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRtNextHopType indicates the type of next hop for this route." ::= { vRtrInetAllCidrRouteEntry 20 } vRtrInetAllCidrRtNextHopOwner OBJECT-TYPE SYNTAX TmnxInetCidrNextHopOwner MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRtNextHopOwner indicates the owner of next hop for this route." ::= { vRtrInetAllCidrRouteEntry 21 } vRtrInetAllCidrRtNHOwnerAuxInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRtNHOwnerAuxInfo indicates the auxiliary information for next hop owner as indicated by vRtrInetAllCidrRtNextHopOwner. The value of vRtrInetAllCidrRtNHOwnerAuxInfo indicates the tunnel-id existing for this next hop type and owner." ::= { vRtrInetAllCidrRouteEntry 22 } vRtrInetAllCidrRtBkupNHType OBJECT-TYPE SYNTAX TmnxInetCidrNextHopType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRtBkupNHType indicates the type of next hop for this backup route." ::= { vRtrInetAllCidrRouteEntry 23 } vRtrInetAllCidrRtBkupNHOwner OBJECT-TYPE SYNTAX TmnxInetCidrNextHopOwner MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRtBkupNHOwner indicates the owner of next hop for this backup route." ::= { vRtrInetAllCidrRouteEntry 24 } vRtrInetAllCidrRtBkupNHOwnAxInfo OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrInetAllCidrRtBkupNHOwnAxInfo indicates the auxiliary information for next hop owner as indicated by vRtrInetAllCidrRtBkupNHOwner. The value of vRtrInetAllCidrRtBkupNHOwnAxInfo indicates the tunnel-id existing for this backup next hop type and owner." ::= { vRtrInetAllCidrRouteEntry 25 } -- -- Virtual Router Interface Statistics Table -- vRtrIfStatsTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfStatsTable table contains statistics per virtual router interface." ::= { tmnxVRtrObjs 54 } vRtrIfStatsEntry OBJECT-TYPE SYNTAX VRtrIfStatsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the statistics per virtual router interface. Entries are created and deleted when entries in the vRtrIfEntry are created and deleted." INDEX { vRtrID, vRtrIfIndex } ::= { vRtrIfStatsTable 1 } VRtrIfStatsEntry ::= SEQUENCE { vRtrIfuRPFCheckFailPkts Counter64, vRtrIfuRPFCheckFailPktsLow32 Counter32, vRtrIfuRPFCheckFailPktsHigh32 Counter32, vRtrIfuRPFCheckFailBytes Counter64, vRtrIfuRPFCheckFailBytesLow32 Counter32, vRtrIfuRPFCheckFailBytesHigh32 Counter32, vRtrIfIpReasFragPktsRcvd Counter64, vRtrIfIpReasFragPktsRcvdLow32 Counter32, vRtrIfIpReasFragPktsRcvdHigh32 Counter32, vRtrIfIpReasFragBytesRcvd Counter64, vRtrIfIpReasFragBytesRcvdLow32 Counter32, vRtrIfIpReasFragBytesRcvdHigh32 Counter32, vRtrIfIpReasFragPktsReas Counter64, vRtrIfIpReasFragPktsReasLow32 Counter32, vRtrIfIpReasFragPktsReasHigh32 Counter32, vRtrIfIpReasFragBytesReas Counter64, vRtrIfIpReasFragBytesReasLow32 Counter32, vRtrIfIpReasFragBytesReasHigh32 Counter32, vRtrIfIpReasFragReasErrors Counter64, vRtrIfIpReasFragReasErrorsLow32 Counter32, vRtrIfIpReasFragReasErrorsHigh32 Counter32, vRtrIfIpReasFragDisc Counter64, vRtrIfIpReasFragDiscLow32 Counter32, vRtrIfIpReasFragDiscHigh32 Counter32, vRtrIfIpReasOutBufRes Counter64, vRtrIfIpReasOutBufResLow32 Counter32, vRtrIfIpReasOutBufResHigh32 Counter32, vRtrIfIpReasPktsRx Counter64, vRtrIfIpReasPktsRxLow32 Counter32, vRtrIfIpReasPktsRxHigh32 Counter32, vRtrIfIpReasBytesRx Counter64, vRtrIfIpReasBytesRxLow32 Counter32, vRtrIfIpReasBytesRxHigh32 Counter32, vRtrIfIpReasPktsTx Counter64, vRtrIfIpReasPktsTxLow32 Counter32, vRtrIfIpReasPktsTxHigh32 Counter32, vRtrIfIpReasBytesTx Counter64, vRtrIfIpReasBytesTxLow32 Counter32, vRtrIfIpReasBytesTxHigh32 Counter32, vRtrIfRxPkts Counter64, vRtrIfRxPktsLow32 Counter32, vRtrIfRxPktsHigh32 Counter32, vRtrIfRxBytes Counter64, vRtrIfRxBytesLow32 Counter32, vRtrIfRxBytesHigh32 Counter32, vRtrIfTxV4Pkts Counter64, vRtrIfTxV4PktsLow32 Counter32, vRtrIfTxV4PktsHigh32 Counter32, vRtrIfTxV4Bytes Counter64, vRtrIfTxV4BytesLow32 Counter32, vRtrIfTxV4BytesHigh32 Counter32, vRtrIfTxV6Pkts Counter64, vRtrIfTxV6PktsLow32 Counter32, vRtrIfTxV6PktsHigh32 Counter32, vRtrIfTxV6Bytes Counter64, vRtrIfTxV6BytesLow32 Counter32, vRtrIfTxV6BytesHigh32 Counter32, vRtrIfTxV4DiscardPkts Counter64, vRtrIfTxV4DiscardPktsLow32 Counter32, vRtrIfTxV4DiscardPktsHigh32 Counter32, vRtrIfTxV4DiscardBytes Counter64, vRtrIfTxV4DiscardBytesLow32 Counter32, vRtrIfTxV4DiscardBytesHigh32 Counter32, vRtrIfTxV6DiscardPkts Counter64, vRtrIfTxV6DiscardPktsLow32 Counter32, vRtrIfTxV6DiscardPktsHigh32 Counter32, vRtrIfTxV6DiscardBytes Counter64, vRtrIfTxV6DiscardBytesLow32 Counter32, vRtrIfTxV6DiscardBytesHigh32 Counter32, vRtrIfIpReasV6FragPktsRcvd Counter64, vRtrIfIpReasV6FragPktsRcvdLow32 Counter32, vRtrIfIpReasV6FragPktsRcvdHigh32 Counter32, vRtrIfIpReasV6FragBytesRcvd Counter64, vRtrIfIpReasV6FragBytesRcvdL32 Counter32, vRtrIfIpReasV6FragBytesRcvdH32 Counter32, vRtrIfIpReasV6FragPktsReas Counter64, vRtrIfIpReasV6FragPktsReasLow32 Counter32, vRtrIfIpReasV6FragPktsReasHigh32 Counter32, vRtrIfIpReasV6FragBytesReas Counter64, vRtrIfIpReasV6FragBytesReasL32 Counter32, vRtrIfIpReasV6FragBytesReasH32 Counter32, vRtrIfIpReasV6FragReasErrors Counter64, vRtrIfIpReasV6FragReasErrorsL32 Counter32, vRtrIfIpReasV6FragReasErrorsH32 Counter32, vRtrIfIpReasV6FragDisc Counter64, vRtrIfIpReasV6FragDiscLow32 Counter32, vRtrIfIpReasV6FragDiscHigh32 Counter32, vRtrIfIpReasV6OutBufRes Counter64, vRtrIfIpReasV6OutBufResLow32 Counter32, vRtrIfIpReasV6OutBufResHigh32 Counter32, vRtrIfIpReasV6PktsRx Counter64, vRtrIfIpReasV6PktsRxLow32 Counter32, vRtrIfIpReasV6PktsRxHigh32 Counter32, vRtrIfIpReasV6BytesRx Counter64, vRtrIfIpReasV6BytesRxLow32 Counter32, vRtrIfIpReasV6BytesRxHigh32 Counter32, vRtrIfIpReasV6PktsTx Counter64, vRtrIfIpReasV6PktsTxLow32 Counter32, vRtrIfIpReasV6PktsTxHigh32 Counter32, vRtrIfIpReasV6BytesTx Counter64, vRtrIfIpReasV6BytesTxLow32 Counter32, vRtrIfIpReasV6BytesTxHigh32 Counter32, vRtrIfSpeed Counter64 } vRtrIfuRPFCheckFailPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfuRPFCheckFailPkts indicates the number of packets that fail uRPF check on this interface." ::= { vRtrIfStatsEntry 1 } vRtrIfuRPFCheckFailPktsLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfuRPFCheckFailPktsLow32 indicates the lower 32 bits of the value of vRtrIfuRPFCheckFailPkts." ::= { vRtrIfStatsEntry 2 } vRtrIfuRPFCheckFailPktsHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfuRPFCheckFailPktsHigh32 indicates the high 32 bits of the value of vRtrIfuRPFCheckFailPkts." ::= { vRtrIfStatsEntry 3 } vRtrIfuRPFCheckFailBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfuRPFCheckFailBytes indicates the number of bytes in the packets that fail uRPF check." ::= { vRtrIfStatsEntry 4 } vRtrIfuRPFCheckFailBytesLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfuRPFCheckFailBytesLow32 indicates the lower 32 bits of the value of vRtrIfuRPFCheckFailBytes." ::= { vRtrIfStatsEntry 5 } vRtrIfuRPFCheckFailBytesHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfuRPFCheckFailBytesHigh32 indicates the high 32 bits of the value of vRtrIfuRPFCheckFailBytes." ::= { vRtrIfStatsEntry 6 } vRtrIfIpReasFragPktsRcvd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragPktsRcvd indicates the number of fragmented packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 7 } vRtrIfIpReasFragPktsRcvdLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragPktsRcvdLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragPktsRcvd." ::= { vRtrIfStatsEntry 8 } vRtrIfIpReasFragPktsRcvdHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragPktsRcvdHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragPktsRcvd." ::= { vRtrIfStatsEntry 9 } vRtrIfIpReasFragBytesRcvd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragBytesRcvd indicates the number of fragmented bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 10 } vRtrIfIpReasFragBytesRcvdLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragBytesRcvdLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragBytesRcvd." ::= { vRtrIfStatsEntry 11 } vRtrIfIpReasFragBytesRcvdHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragBytesRcvdHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragBytesRcvd." ::= { vRtrIfStatsEntry 12 } vRtrIfIpReasFragPktsReas OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragPktsReas indicates the number of fragmented packets reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 13 } vRtrIfIpReasFragPktsReasLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragPktsReasLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragPktsReas." ::= { vRtrIfStatsEntry 14 } vRtrIfIpReasFragPktsReasHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragPktsReasHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragPktsRcvd." ::= { vRtrIfStatsEntry 15 } vRtrIfIpReasFragBytesReas OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragBytesReas indicates the number of fragmented bytes reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 16 } vRtrIfIpReasFragBytesReasLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragBytesReasLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragBytesReas." ::= { vRtrIfStatsEntry 17 } vRtrIfIpReasFragBytesReasHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragBytesReasHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragBytesReas." ::= { vRtrIfStatsEntry 18 } vRtrIfIpReasFragReasErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragReasErrors indicates the number of reassembly errors occured on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 19 } vRtrIfIpReasFragReasErrorsLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragReasErrorsLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragReasErrors." ::= { vRtrIfStatsEntry 20 } vRtrIfIpReasFragReasErrorsHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragReasErrorsHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragReasErrors." ::= { vRtrIfStatsEntry 21 } vRtrIfIpReasFragDisc OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragDisc indicates the number of packets reassembly discarded due to the timeout on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 22 } vRtrIfIpReasFragDiscLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragDiscLow32 indicates the lower 32 bits of the value of vRtrIfIpReasFragDisc." ::= { vRtrIfStatsEntry 23 } vRtrIfIpReasFragDiscHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasFragDiscHigh32 indicates the high 32 bits of the value of vRtrIfIpReasFragDisc." ::= { vRtrIfStatsEntry 24 } vRtrIfIpReasOutBufRes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasOutBufRes indicates the number of times out of buffer resources happend while reassembly on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 25 } vRtrIfIpReasOutBufResLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasOutBufResLow32 indicates the lower 32 bits of the value of vRtrIfIpReasOutBufRes." ::= { vRtrIfStatsEntry 26 } vRtrIfIpReasOutBufResHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasOutBufResHigh32 indicates the high 32 bits of the value of vRtrIfIpReasOutBufRes." ::= { vRtrIfStatsEntry 27 } vRtrIfIpReasPktsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasPktsRx indicates the number of total packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 28 } vRtrIfIpReasPktsRxLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasPktsRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasPktsRx." ::= { vRtrIfStatsEntry 29 } vRtrIfIpReasPktsRxHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasPktsRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasPktsRx." ::= { vRtrIfStatsEntry 30 } vRtrIfIpReasBytesRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasBytesRx indicates the number of total bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 31 } vRtrIfIpReasBytesRxLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasBytesRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasBytesRx." ::= { vRtrIfStatsEntry 32 } vRtrIfIpReasBytesRxHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasBytesRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasBytesRx." ::= { vRtrIfStatsEntry 33 } vRtrIfIpReasPktsTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasPktsTx indicates the number of total packets sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 34 } vRtrIfIpReasPktsTxLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasPktsTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasPktsTx." ::= { vRtrIfStatsEntry 35 } vRtrIfIpReasPktsTxHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasPktsTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasPktsTx." ::= { vRtrIfStatsEntry 36 } vRtrIfIpReasBytesTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasBytesTx indicates the number of total bytes sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 37 } vRtrIfIpReasBytesTxLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasBytesTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasBytesTx." ::= { vRtrIfStatsEntry 38 } vRtrIfIpReasBytesTxHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasBytesTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasBytesTx." ::= { vRtrIfStatsEntry 39 } vRtrIfRxPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfRxPkts indicates the number of total packets received by this interface." ::= { vRtrIfStatsEntry 40 } vRtrIfRxPktsLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfRxPktsLow32 indicates the lower 32 bits of the value of vRtrIfRxPkts." ::= { vRtrIfStatsEntry 41 } vRtrIfRxPktsHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfRxPktsHigh32 indicates the high 32 bits of the value of vRtrIfRxPkts." ::= { vRtrIfStatsEntry 42 } vRtrIfRxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfRxBytes indicates the number of total bytes received by this interface." ::= { vRtrIfStatsEntry 43 } vRtrIfRxBytesLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfRxBytesLow32 indicates the lower 32 bits of the value of vRtrIfRxBytes." ::= { vRtrIfStatsEntry 44 } vRtrIfRxBytesHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfRxBytesHigh32 indicates the high 32 bits of the value of vRtrIfRxBytes." ::= { vRtrIfStatsEntry 45 } vRtrIfTxV4Pkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4Pkts indicates the number of total IPv4 packets sent from this interface." ::= { vRtrIfStatsEntry 46 } vRtrIfTxV4PktsLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4PktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV4Pkts." ::= { vRtrIfStatsEntry 47 } vRtrIfTxV4PktsHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4PktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV4Pkts." ::= { vRtrIfStatsEntry 48 } vRtrIfTxV4Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4Bytes indicates the number of total IPv4 bytes sent from this interface." ::= { vRtrIfStatsEntry 49 } vRtrIfTxV4BytesLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4BytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV4Bytes." ::= { vRtrIfStatsEntry 50 } vRtrIfTxV4BytesHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4BytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV4Bytes." ::= { vRtrIfStatsEntry 51 } vRtrIfTxV6Pkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6Pkts indicates the number of total IPv6 packets sent from this interface." ::= { vRtrIfStatsEntry 52 } vRtrIfTxV6PktsLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6PktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV6Pkts." ::= { vRtrIfStatsEntry 53 } vRtrIfTxV6PktsHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6PktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV6Pkts." ::= { vRtrIfStatsEntry 54 } vRtrIfTxV6Bytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6Bytes indicates the number of total IPv6 bytes sent from this interface." ::= { vRtrIfStatsEntry 55 } vRtrIfTxV6BytesLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6BytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV6Bytes." ::= { vRtrIfStatsEntry 56 } vRtrIfTxV6BytesHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6BytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV6Bytes." ::= { vRtrIfStatsEntry 57 } vRtrIfTxV4DiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4DiscardPkts indicates the number of total IPv4 transmit packets discarded by this interface." ::= { vRtrIfStatsEntry 58 } vRtrIfTxV4DiscardPktsLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4DiscardPktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV4DiscardPkts." ::= { vRtrIfStatsEntry 59 } vRtrIfTxV4DiscardPktsHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4DiscardPktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV4DiscardPkts." ::= { vRtrIfStatsEntry 60 } vRtrIfTxV4DiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4DiscardBytes indicates the number of total IPv4 transmit bytes discarded by this interface." ::= { vRtrIfStatsEntry 61 } vRtrIfTxV4DiscardBytesLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4DiscardBytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV4DiscardBytes." ::= { vRtrIfStatsEntry 62 } vRtrIfTxV4DiscardBytesHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV4DiscardBytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV4DiscardBytes." ::= { vRtrIfStatsEntry 63 } vRtrIfTxV6DiscardPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6DiscardPkts indicates the number of total IPv6 transmit packets discarded by this interface." ::= { vRtrIfStatsEntry 64 } vRtrIfTxV6DiscardPktsLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6DiscardPktsLow32 indicates the lower 32 bits of the value of vRtrIfTxV6DiscardPkts." ::= { vRtrIfStatsEntry 65 } vRtrIfTxV6DiscardPktsHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6DiscardPktsHigh32 indicates the high 32 bits of the value of vRtrIfTxV6DiscardPkts." ::= { vRtrIfStatsEntry 66 } vRtrIfTxV6DiscardBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6DiscardBytes indicates the number of total IPv6 transmit bytes discarded by this interface." ::= { vRtrIfStatsEntry 67 } vRtrIfTxV6DiscardBytesLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6DiscardBytesLow32 indicates the lower 32 bits of the value of vRtrIfTxV6DiscardBytes." ::= { vRtrIfStatsEntry 68 } vRtrIfTxV6DiscardBytesHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxV6DiscardBytesHigh32 indicates the high 32 bits of the value of vRtrIfTxV6DiscardBytes." ::= { vRtrIfStatsEntry 69 } vRtrIfIpReasV6FragPktsRcvd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragPktsRcvd indicates the number of IPv6 fragmented packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 70 } vRtrIfIpReasV6FragPktsRcvdLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragPktsRcvdLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragPktsRcvd." ::= { vRtrIfStatsEntry 71 } vRtrIfIpReasV6FragPktsRcvdHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragPktsRcvdHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragPktsRcvd." ::= { vRtrIfStatsEntry 72 } vRtrIfIpReasV6FragBytesRcvd OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragBytesRcvd indicates the number of IPv6 fragmented bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 73 } vRtrIfIpReasV6FragBytesRcvdL32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragBytesRcvdL32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragBytesRcvd." ::= { vRtrIfStatsEntry 74 } vRtrIfIpReasV6FragBytesRcvdH32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragBytesRcvdH32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragBytesRcvd." ::= { vRtrIfStatsEntry 75 } vRtrIfIpReasV6FragPktsReas OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragPktsReas indicates the number of IPv6 fragmented packets reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 76 } vRtrIfIpReasV6FragPktsReasLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragPktsReasLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragPktsReas." ::= { vRtrIfStatsEntry 77 } vRtrIfIpReasV6FragPktsReasHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragPktsReasHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragPktsRcvd." ::= { vRtrIfStatsEntry 78 } vRtrIfIpReasV6FragBytesReas OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragBytesReas indicates the number of IPv6 fragmented bytes reassembled on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 79 } vRtrIfIpReasV6FragBytesReasL32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragBytesReasL32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragBytesReas." ::= { vRtrIfStatsEntry 80 } vRtrIfIpReasV6FragBytesReasH32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragBytesReasH32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragBytesReas." ::= { vRtrIfStatsEntry 81 } vRtrIfIpReasV6FragReasErrors OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragReasErrors indicates the number of IPv6 reassembly errors occured on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 82 } vRtrIfIpReasV6FragReasErrorsL32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragReasErrorsL32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragReasErrors." ::= { vRtrIfStatsEntry 83 } vRtrIfIpReasV6FragReasErrorsH32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragReasErrorsH32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragReasErrors." ::= { vRtrIfStatsEntry 84 } vRtrIfIpReasV6FragDisc OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragDisc indicates the number of IPv6 packets reassembly discarded due to the timeout on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 85 } vRtrIfIpReasV6FragDiscLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragDiscLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6FragDisc." ::= { vRtrIfStatsEntry 86 } vRtrIfIpReasV6FragDiscHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6FragDiscHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6FragDisc." ::= { vRtrIfStatsEntry 87 } vRtrIfIpReasV6OutBufRes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6OutBufRes indicates the number of times out of buffer resources happend while IPv6 reassembly on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 88 } vRtrIfIpReasV6OutBufResLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6OutBufResLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6OutBufRes." ::= { vRtrIfStatsEntry 89 } vRtrIfIpReasV6OutBufResHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6OutBufResHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6OutBufRes." ::= { vRtrIfStatsEntry 90 } vRtrIfIpReasV6PktsRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6PktsRx indicates the number of total IPv6 packets received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 91 } vRtrIfIpReasV6PktsRxLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6PktsRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6PktsRx." ::= { vRtrIfStatsEntry 92 } vRtrIfIpReasV6PktsRxHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6PktsRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6PktsRx." ::= { vRtrIfStatsEntry 93 } vRtrIfIpReasV6BytesRx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6BytesRx indicates the number of total IPv6 bytes received on this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 94 } vRtrIfIpReasV6BytesRxLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6BytesRxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6BytesRx." ::= { vRtrIfStatsEntry 95 } vRtrIfIpReasV6BytesRxHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6BytesRxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6BytesRx." ::= { vRtrIfStatsEntry 96 } vRtrIfIpReasV6PktsTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6PktsTx indicates the number of total IPv6 packets sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 97 } vRtrIfIpReasV6PktsTxLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6PktsTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6PktsTx." ::= { vRtrIfStatsEntry 98 } vRtrIfIpReasV6PktsTxHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6PktsTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6PktsTx." ::= { vRtrIfStatsEntry 99 } vRtrIfIpReasV6BytesTx OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6BytesTx indicates the number of total IPv6 bytes sent from this interface. The value of the object is '0' if the MDA type is not 'isa-ip-reas'." ::= { vRtrIfStatsEntry 100 } vRtrIfIpReasV6BytesTxLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6BytesTxLow32 indicates the lower 32 bits of the value of vRtrIfIpReasV6BytesTx." ::= { vRtrIfStatsEntry 101 } vRtrIfIpReasV6BytesTxHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfIpReasV6BytesTxHigh32 indicates the high 32 bits of the value of vRtrIfIpReasV6BytesTx." ::= { vRtrIfStatsEntry 102 } vRtrIfSpeed OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfSpeed indicates an estimate of the current bandwidth in bits per second for this interface." ::= { vRtrIfStatsEntry 103 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- IP address pool table -- vRtrIpPoolTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpPoolTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrIpPoolTable by adding, deleting an entry or change to a writable object in the table." ::= { tmnxVRtrMobGatewayObjs 1 } vRtrIpPoolTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIpPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIpPoolTable has an entry for each IP address pool configured in the system." ::= { tmnxVRtrMobGatewayObjs 2 } vRtrIpPoolEntry OBJECT-TYPE SYNTAX VRtrIpPoolEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an IP address pool configured in the system. Entries can be created and deleted by the user." INDEX { vRtrID, vRtrIpPoolName } ::= { vRtrIpPoolTable 1 } VRtrIpPoolEntry ::= SEQUENCE { vRtrIpPoolName TNamedItem, vRtrIpPoolRowStatus RowStatus, vRtrIpPoolLastChanged TimeStamp, vRtrIpPoolDescription TItemDescription, vRtrIpPoolExclusive TruthValue, vRtrIpPoolAddressHoldTimer Unsigned32, vRtrIpPoolSuppress0and255 TruthValue } vRtrIpPoolName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIpPoolName specifies the name of this IP address pool." ::= { vRtrIpPoolEntry 1 } vRtrIpPoolRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIpPoolRowStatus specifies the row status of this entry. This object is used to create or delete rows in this table." ::= { vRtrIpPoolEntry 2 } vRtrIpPoolLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpPoolLastChanged indicates the timestamp of the last change to this row in vRtrIpPoolTable." ::= { vRtrIpPoolEntry 3 } vRtrIpPoolDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIpPoolDescription specifies the description string for this IP address pool. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } ::= { vRtrIpPoolEntry 4 } vRtrIpPoolExclusive OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIpPoolExclusive specifies if this IP address pool will be used exclusively by an Access Point Name (APN) or not." DEFVAL { false } ::= { vRtrIpPoolEntry 5 } vRtrIpPoolAddressHoldTimer OBJECT-TYPE SYNTAX Unsigned32 (0..10) UNITS "minutes" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIpPoolAddressHoldTimer specifies the amount of time, in minutes, a newly released IP address is held before being made available for reassignment." DEFVAL { 3 } ::= { vRtrIpPoolEntry 6 } vRtrIpPoolSuppress0and255 OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIpPoolSuppress0and255 specifies if allocation of all .0 and .255 IP addresses from the local IP pool to mobile subscribers are suppressed. By default the Packet Data Network Gateway (PGW) supports allocating .0 and .255 IP address to mobile subscribers except for the first .0 and last .255 IP address in the IP Pool." DEFVAL { false } ::= { vRtrIpPoolEntry 7 } -- -- IP pool address table -- vRtrIpPoolAddrTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpPoolAddrTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrIpPoolAddrTable by adding, deleting an entry or change to a writable object in the table." ::= { tmnxVRtrMobGatewayObjs 3 } vRtrIpPoolAddrTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIpPoolAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIpPoolAddrTable has an entry for each IP prefix configured in an IP pool in the system." ::= { tmnxVRtrMobGatewayObjs 4 } vRtrIpPoolAddrEntry OBJECT-TYPE SYNTAX VRtrIpPoolAddrEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an IP prefix configured in an IP pool in the system. Entries can be created and deleted by the user." INDEX { vRtrID, vRtrIpPoolName, vRtrIpPoolAddrType, vRtrIpPoolAddr, vRtrIpPoolAddrPrefixLen } ::= { vRtrIpPoolAddrTable 1 } VRtrIpPoolAddrEntry ::= SEQUENCE { vRtrIpPoolAddrType InetAddressType, vRtrIpPoolAddr InetAddress, vRtrIpPoolAddrPrefixLen InetAddressPrefixLength, vRtrIpPoolAddrRowStatus RowStatus, vRtrIpPoolAddrLastChanged TimeStamp, vRtrIpPoolAddrBlock TruthValue, vRtrIpPoolAddrIpv6AssignedLen Unsigned32 } vRtrIpPoolAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIpPoolAddrType specifies the type of the address represented by vRtrIpPoolAddr." ::= { vRtrIpPoolAddrEntry 1 } vRtrIpPoolAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIpPoolAddr specifies the prefix of the IP address being added to the IP pool." ::= { vRtrIpPoolAddrEntry 2 } vRtrIpPoolAddrPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIpPoolAddrPrefixLen specifies the length of the IP netmask for this IP address. The range of this object is 9..32 if the value of vRtrIpPoolAddrType is set to 'ipv4'. The range of this object is as follows if the value of vRtrIpPoolAddrType is set to 'ipv6'. - The range of vRtrIpPoolAddrPrefixLen is 41..56, if the value of vRtrIpPoolAddrIpv6AssignedLen is set to 64. - The range of vRtrIpPoolAddrPrefixLen is 33..48, if the value of vRtrIpPoolAddrIpv6AssignedLen is set to 56. - The range of vRtrIpPoolAddrPrefixLen is 25..40, if the value of vRtrIpPoolAddrIpv6AssignedLen is set to 48." ::= { vRtrIpPoolAddrEntry 3 } vRtrIpPoolAddrRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIpPoolAddrRowStatus specifies the row status of this entry. This object is used to create or delete rows in this table." ::= { vRtrIpPoolAddrEntry 4 } vRtrIpPoolAddrLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIpPoolAddrLastChanged indicates the timestamp of the last change to this row in vRtrIpPoolAddrTable." ::= { vRtrIpPoolAddrEntry 5 } vRtrIpPoolAddrBlock OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIpPoolAddrBlock specifies if the reassignment of the released IP address will be allowed or not. If the value of this object is set to 'true', then the reassignment of the released IP address will be blocked. This will be used to move the block of IP pools from one Packet Data Network Gateway (PGW) to another PGW. " DEFVAL { false } ::= { vRtrIpPoolAddrEntry 6 } vRtrIpPoolAddrIpv6AssignedLen OBJECT-TYPE SYNTAX Unsigned32 (48..64) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrIpPoolAddrIpv6AssignedLen specifies the the prefix length which is used for assigning IP address to User Equipment (UE). The value of this object can be set only if the value of vRtrIpPoolAddrType is set to 'ipv6'. The value of this object can be set to 48, 56 and 64." DEFVAL { 64 } ::= { vRtrIpPoolAddrEntry 7 } -- -- IP pool address statistics table -- vRtrIpPoolStatTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIpPoolStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIpPoolStatTable has an entry for each IP prefix configured in an IP pool in the system." ::= { tmnxVRtrMobGatewayObjs 5 } vRtrIpPoolStatEntry OBJECT-TYPE SYNTAX VRtrIpPoolStatEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the statistics for an IP prefix configured in an IP pool in the system." AUGMENTS { vRtrIpPoolAddrEntry } ::= { vRtrIpPoolStatTable 1 } VRtrIpPoolStatEntry ::= SEQUENCE { vRtrIpPoolStatAllocated Gauge32, vRtrIpPoolStatFree Gauge32, vRtrIpPoolStatHeld Gauge32 } vRtrIpPoolStatAllocated OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIpPoolStatAllocated indicates the number of IP Addresses used." ::= { vRtrIpPoolStatEntry 1 } vRtrIpPoolStatFree OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIpPoolStatFree indicates the number of free IP Addresses." ::= { vRtrIpPoolStatEntry 2 } vRtrIpPoolStatHeld OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrIpPoolStatHeld indicates the number of IP Addresses held." ::= { vRtrIpPoolStatEntry 3 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- Network domain table -- vRtrNetDomainTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrNetDomainTblLastChanged indicates the sysUpTime at the time of the last modification of vRtrNetDomainTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxVRtrObjs 55 } vRtrNetDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrNetDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrNetDomainTable table contains network-domains which can be then associated with individual interfaces and SDPs." ::= { tmnxVRtrObjs 56 } vRtrNetDomainEntry OBJECT-TYPE SYNTAX VRtrNetDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the network-domains per virtual router interface. There will always be at least one row entry in this table which represents the 'default' network-doamin. This entry is created when the system is initialized and can never be deleted." INDEX { vRtrID, vRtrNetDomainName } ::= { vRtrNetDomainTable 1 } VRtrNetDomainEntry ::= SEQUENCE { vRtrNetDomainName TNamedItem, vRtrNetDomainRowStatus RowStatus, vRtrNetDomainLastChanged TimeStamp, vRtrNetDomainDesc TItemDescription, vRtrNetDomainIfAssociationCnt Gauge32, vRtrNetDomainSdpAssociationCnt Gauge32 } vRtrNetDomainName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrNetDomainName specifies the network-domain name configured on this virtual router. There will always be at least one network-domain entry defined by the agent with value 'default' which represents the default network-domain." ::= { vRtrNetDomainEntry 1 } vRtrNetDomainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrNetDomainRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table." ::= { vRtrNetDomainEntry 2 } vRtrNetDomainLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrNetDomainLastChanged indicates the sysUpTime when any object of the row is last changed." ::= { vRtrNetDomainEntry 3 } vRtrNetDomainDesc OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrNetDomainDesc is a user provided description string for this network-domain. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } -- the empty string ::= { vRtrNetDomainEntry 4 } vRtrNetDomainIfAssociationCnt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrNetDomainIfAssociationCnt indicates the number of network interfaces associated with this network-domain." ::= { vRtrNetDomainEntry 5 } vRtrNetDomainSdpAssociationCnt OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrNetDomainSdpAssociationCnt indicates the number of SDPs associated with this network-domain." ::= { vRtrNetDomainEntry 6 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- Interface specific network domain table -- vRtrIfNetDomainTblLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfNetDomainTblLastChanged indicates the sysUpTime at the time of the last modification of vRtrIfNetDomainTable. If no changes were made to the table since the last re-initialization of the local network management subsystem, then this object contains a zero value." ::= { tmnxVRtrObjs 57 } vRtrIfNetDomainTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfNetDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfNetDomainTable provides an extension to the vRtrIfTable. It has an entry for each network domain associated with virtual router interface configured in the system." ::= { tmnxVRtrObjs 58 } vRtrIfNetDomainEntry OBJECT-TYPE SYNTAX VRtrIfNetDomainEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents information related to network-domain for a virtual router interface in the system." INDEX { vRtrID, vRtrIfIndex, vRtrNetDomainName} ::= { vRtrIfNetDomainTable 1 } VRtrIfNetDomainEntry ::= SEQUENCE { vRtrIfNetDomainRowStatus RowStatus, vRtrIfNetDomainLastChanged TimeStamp } vRtrIfNetDomainRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrNetDomainRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table." ::= { vRtrIfNetDomainEntry 1 } vRtrIfNetDomainLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrNetDomainLastChanged indicates the sysUpTime when any object of the row is last changed." ::= { vRtrIfNetDomainEntry 2 } -- -- Alcatel-Lucent SROS series Virtual Router Configuration Table Extension -- -- Augmentation of the vRtrConfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, vRtrConfTable, and the augmenting table, vRtrConfExtTable. -- This in effect extends the vRtrConfTable with additional columns. -- Creation (or deletion) of a row in the vRtrConfTable results in the same -- fate for the row in the vRtrConfExtTable. -- vRtrConfExtTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrConfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrConfExtTable provides an extension of the vRtrConfTable." ::= { tmnxVRtrObjs 60 } vRtrConfExtEntry OBJECT-TYPE SYNTAX VRtrConfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrConfExtTable represents additional columns for attributes specific to the Alcatel-Lucent SROS series implementation for the router configuration table." AUGMENTS { vRtrConfEntry } ::= { vRtrConfExtTable 1 } VRtrConfExtEntry ::= SEQUENCE { vRtrLdpShortcut TmnxEnabledDisabled, vRtrSingleSfmOverloadAdminState TmnxAdminState, vRtrSingleSfmOverloadHldOffTime Unsigned32, vRtrSingleSfmOverloadState TmnxVrtrSingleSfmOverloadState, vRtrSingleSfmOverloadStart TimeStamp, vRtrSingleSfmOverloadTime TimeInterval, vRtrGrtState TruthValue, vRtrMvpnIpmsiP2MPAdmin TmnxAdminState, vRtrMvpnSpmsiP2MPAdmin TmnxAdminState, vRtrMvpnIpmsiLspTemplate TNamedItemOrEmpty, vRtrMvpnSpmsiLspTemplate TNamedItemOrEmpty, vRtrMvpnIpmsiType INTEGER, vRtrMvpnSpmsiType INTEGER, vRtrMvpnSpmsiMaxLimit Unsigned32, vRtrFibPriority INTEGER, vRtrCarrierCarrierVpn TruthValue, vRtrLabelMode INTEGER, vRtrBgpSharedQueue TruthValue, vRtrBgpSharedQueueCIR TCIRRate, vRtrBgpSharedQueuePIR TPIRRate, vRtrMvpnMdtSafi TruthValue, vRtrMvpnMdtDefGrpAddrType InetAddressType, vRtrMvpnMdtDefGrpAddress InetAddress, vRtrMvpnIpmsiEnableBfdRoot TruthValue, vRtrMvpnIpmsiEnableBfdLeaf TruthValue, vRtrMvpnIpmsiBfdRtTraInt Unsigned32, vRtrMvpnIpmsiBfdRootMult Unsigned32, vRtrVpnBackupPath TmnxVpnIpBackupFamily, vRtrIpFastReroute TruthValue, vRtrGrtLocalMgmtState TruthValue } vRtrLdpShortcut OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrLdpShortcut specifies if IP packets are being forwarded using LDP shortcuts over all network interfaces in the system which participate in the IS-IS and OSPF routing protocols." DEFVAL { disabled } ::= { vRtrConfExtEntry 1 } vRtrSingleSfmOverloadAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrSingleSfmOverloadAdminState specifies the administrative state of the IGP single-SFM-overload behavior in this virtual router instance. When the value of vRtrSingleSfmOverloadAdminState is equal to 'inService', IGP protocols (either IS-IS or OSPF) enter an overload state when the node only has a single SFM functioning." DEFVAL { outOfService } ::= { vRtrConfExtEntry 2 } vRtrSingleSfmOverloadHldOffTime OBJECT-TYPE SYNTAX Unsigned32 (0..600) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrSingleSfmOverloadHldOffTime specifies the delay between the detection of the single-SFM condition and the IGP entering the overload state." DEFVAL { 0 } ::= { vRtrConfExtEntry 3 } vRtrSingleSfmOverloadState OBJECT-TYPE SYNTAX TmnxVrtrSingleSfmOverloadState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrSingleSfmOverloadState indicates the IGP single-SFM-overload state." ::= { vRtrConfExtEntry 4 } vRtrSingleSfmOverloadStart OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrSingleSfmOverloadStart indicates the sysUpTime the last time that the vRtrSingleSfmOverloadState had a transition from 'notApplicable' or 'normal' to 'overload'. If such a transition never occurred, this object contains a zero value." ::= { vRtrConfExtEntry 5 } vRtrSingleSfmOverloadTime OBJECT-TYPE SYNTAX TimeInterval MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrSingleSfmOverloadTime indicates the duration of the most recent overload." ::= { vRtrConfExtEntry 6 } vRtrGrtState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGrtState specifies if a route lookup is done in the Global Route Table (GRT) when the lookup in the local VRF fails. When the value of this object is set to 'false', route lookup in the GRT is disabled." DEFVAL { false } ::= { vRtrConfExtEntry 7 } vRtrMvpnIpmsiP2MPAdmin OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnIpmsiP2MPAdmin specifies the current administrative state of P2MP for the inclusive provider tunnel. An 'inconsistentValue' error is returned if this object is set to non-default value when vRtrMvpnIpmsiLspTemplate is set to its default value." DEFVAL { outOfService } ::= { vRtrConfExtEntry 8 } vRtrMvpnSpmsiP2MPAdmin OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnSpmsiP2MPAdmin specifies the current administrative state of P2MP for the selective provider tunnel. An 'inconsistentValue' error is returned if this object is set to non-default value when vRtrMvpnSpmsiLspTemplate is set to its default value." DEFVAL { outOfService } ::= { vRtrConfExtEntry 9 } vRtrMvpnIpmsiLspTemplate OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the vRtrMvpnIpmsiLspTemplate specifies the name of the template whose parameters configured in TIMETRA-MPLS-MIB::vRtrMplsLspTemplateTable are signalled to the automatically created P2MP LSP for the inclusive provider tunnel. If a corresponding index does not exist in TIMETRA-MPLS-MIB::vRtrMplsLspTemplateTable, an 'inconsistentValue' error will be returned. An inconsistentValue' error is returned if this object is set to non-default value when vRtrMvpnIpmsiP2MPAdmin is set to its non-default value." DEFVAL { ''H } ::= { vRtrConfExtEntry 10 } vRtrMvpnSpmsiLspTemplate OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the vRtrMvpnSpmsiLspTemplate specifies the name of the template whose paramters configured in TIMETRA-MPLS-MIB::vRtrMplsLspTemplateTable are signalled to the automatically created P2MP LSP for the selective provider tunnel. If a corresponding index does not exist in TIMETRA-MPLS-MIB::vRtrMplsLspTemplateTable, an 'inconsistentValue' error will be returned. An inconsistentValue' error is returned if this object is set to non-default value when vRtrMvpnSpmsiP2MPAdmin is set to its non-default value." DEFVAL { ''H } ::= { vRtrConfExtEntry 11 } vRtrMvpnIpmsiType OBJECT-TYPE SYNTAX INTEGER { none (0), rsvp (1), pim (2), ldp (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnIpmsiType specifies the type of the inclusive provider tunnel. When the value of vRtrMvpnIpmsiType is set to 'rsvp', the inclusive provider tunnel is used for RSVP. When the value is set to 'pim', the inclusive provider tunnel is used for PIM. When the value is set to 'ldp', the inclusive provider tunnel is used for LDP." DEFVAL { none } ::= { vRtrConfExtEntry 12 } vRtrMvpnSpmsiType OBJECT-TYPE SYNTAX INTEGER { none (0), rsvp (1), pim (2), ldp (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnSpmsiType specifies the type of the selective provider tunnel. When the value of vRtrMvpnSpmsiType is set to 'rsvp', the selective provider tunnel is used for RSVP. When the value is set to 'pim', the selective provider tunnel is used for PIM. When the value is set to 'ldp', the selective provider tunnel is used for LDP." DEFVAL { none } ::= { vRtrConfExtEntry 13 } vRtrMvpnSpmsiMaxLimit OBJECT-TYPE SYNTAX Unsigned32 (1..4000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrMvpnSpmsiMaxLimit specifies the maximum number of RSVP/mLDP P2MP S-PMSI tunnels for the mVPN. Once the limit is reached, no more RSVP/mLDP P2MP S-PMSI are created and traffic over the data-threshold will stay on I-PMSI." DEFVAL { 10 } ::= { vRtrConfExtEntry 14 } vRtrFibPriority OBJECT-TYPE SYNTAX INTEGER { standard (1), high (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrFibPriority specifies the priority of updating set of routes into the forwarding plane. If the value of vRtrFibPriority for the VPRN is set to 'high', the FIB (Forwarding Information Base) entries for the VPRN are given priority over all other routes. By default the vRtrFibPriority for a VPRN is set to 'standard' which means the FIB entries for the VPRN do not have any preference over routes from other VPRNs." DEFVAL { standard } ::= { vRtrConfExtEntry 15 } vRtrCarrierCarrierVpn OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrCarrierCarrierVpn specifies whether Carrier supporting Carrier model is supported on this VPRN service." DEFVAL { false } ::= { vRtrConfExtEntry 16 } vRtrLabelMode OBJECT-TYPE SYNTAX INTEGER { vrf (1), nexthop (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrLabelMode specifies the mode of allocation of service labels to the routes exported by the VPRN as BGP-VPN routes. If the value of vRtrLabelMode is set to 'nexthop(2)', the service labels are allocated per next-hop. By default the value of vRtrLabelMode is set to 'vrf(1)' which means the service labels are allocated per VRF(Virtual Routing and Forwarding)." DEFVAL { vrf } ::= { vRtrConfExtEntry 17 } vRtrBgpSharedQueue OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrBgpSharedQueue specifies whether BGP peers associated with this VPRN instance share a single CPM queue." DEFVAL { false } ::= { vRtrConfExtEntry 18 } vRtrBgpSharedQueueCIR OBJECT-TYPE SYNTAX TCIRRate UNITS "kilo bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrBgpSharedQueueCIR specifies the Committed information rate (CIR) in kbps for BGP shared queue for this VPRN instance." DEFVAL { 4000 } ::= { vRtrConfExtEntry 19 } vRtrBgpSharedQueuePIR OBJECT-TYPE SYNTAX TPIRRate UNITS "kilo bits per second" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrBgpSharedQueuePIR specifies the Peak information rate (PIR) in kbps for BGP shared queue for this VPRN instance." DEFVAL { 4000 } ::= { vRtrConfExtEntry 20 } vRtrMvpnMdtSafi OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMvpnMdtSafi indicates whether MDT-SAFI is enabled on the MVPN or not. If the value of the object is 'true', it indicates that the MDT-SAFI is enabled for MVPN. If the value of the object is 'false', it indicates that the MDT-SAFI is not enabled for MVPN." DEFVAL { false } ::= { vRtrConfExtEntry 21 } vRtrMvpnMdtDefGrpAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMdtDefGrpAddrType indicates the type of default core group address of the Multicast Distribution Tree(MDT) specified by vRtrMvpnMdtDefGrpAddress." ::= { vRtrConfExtEntry 22 } vRtrMvpnMdtDefGrpAddress OBJECT-TYPE SYNTAX InetAddress (SIZE (0|4|16)) MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrPimNgAFGenMdtDefGrpAddress indicates the default core group address of the Multicast Distribution Tree(MDT). The value of this object is applicable only when the value of vRtrMvpnMdtSafi is 'true'." ::= { vRtrConfExtEntry 23 } vRtrMvpnIpmsiEnableBfdRoot OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnIpmsiEnableBfdRoot specifies whether or not Bi-directional Forwarding Detection is enabled on the tunnel root. When the value is 'true', the bfd session over RSVP-TE P2MP LSP for upstream fast failover tunnel status detection is enabled on the root. When it is 'false', the bfd session is disabled on the root. An 'inconsistentValue' error is returned if an attempt is made to set this object to 'true' without specifying a value for vRtrMvpnIpmsiBfdRtTraInt. The value of this object is only applicable when vRtrMvpnIpmsiType is set to 'rsvp'." DEFVAL { false } ::= { vRtrConfExtEntry 24 } vRtrMvpnIpmsiEnableBfdLeaf OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnIpmsiEnableBfdLeaf specifies whether or not Bi-directional Forwarding Detection is enabled on the tunnel leaf. When the value is 'true', the bfd session over RSVP-TE P2MP LSP for upstream fast failover tunnel status detection is enabled on the leaf. When it is 'false', the bfd session is disabled on the leaf. The value of this object is only applicable when vRtrMvpnIpmsiType is set to 'rsvp'." DEFVAL { false } ::= { vRtrConfExtEntry 25 } vRtrMvpnIpmsiBfdRtTraInt OBJECT-TYPE SYNTAX Unsigned32 (10..100000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnIpmsiBfdRtTraInt specifies the BFD transmit interval over this interface. The minimum accepted value depends on the value of 'vRtrIfBfdExtType', as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds. The value of this object is only applicable when vRtrMvpnIpmsiType is set to 'rsvp'. An 'inconsistentValue' error is returned if an attempt is made to modify the value of this object when vRtrMvpnIpmsiEnableBfdRoot is set to false." DEFVAL { 300 } ::= { vRtrConfExtEntry 26 } vRtrMvpnIpmsiBfdRootMult OBJECT-TYPE SYNTAX Unsigned32 (3..20) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnIpmsiBfdRootMult specifies the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault. The value of this object is only applicable when vRtrMvpnIpmsiType is set to 'rsvp'. An 'inconsistentValue' error is returned if an attempt is made to modify the value of this object when vRtrMvpnIpmsiEnableBfdRoot is set to false." DEFVAL { 3 } ::= { vRtrConfExtEntry 27 } vRtrVpnBackupPath OBJECT-TYPE SYNTAX TmnxVpnIpBackupFamily MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVpnBackupPath specifies the address families for which the computation and use of a backup path is enabled for BGP-VPN routes imported into the VPRN." DEFVAL { {} } ::= { vRtrConfExtEntry 28 } vRtrIpFastReroute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIpFastReroute specifies whether to enable or disable IP fast re-route capability. When the value of vRtrIpFastReroute is set to 'true' IP fast re-route capability is enabled and when vRtrIpFastReroute is set to 'false' IP fast re-route capability is disabled." DEFVAL { false } ::= { vRtrConfExtEntry 29 } vRtrGrtLocalMgmtState OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrGrtLocalMgmtState specifies whether to enable or disable traffic from GRT-leaking enabled VPRN instances to reach local interfaces in the base routing instance. When the value of vRtrGrtLocalMgmtState is set to 'true', management protocols like SSH, Telnet, FTP, SNMP, etc are allowed from a GRT-leaking enabled VPRN to access local interfaces in the global routing instance. Ping and traceroute are independent of the value of 'vRtrGrtLocalMgmtState'." DEFVAL { false } ::= { vRtrConfExtEntry 30 } -- -- Extension to Virtual Router Interfaces Table -- vRtrIfExtTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfExtTable has an entry for each router interface configured in the system. This table augments the vRtrIfTable." ::= { tmnxVRtrObjs 61 } vRtrIfExtEntry OBJECT-TYPE SYNTAX VRtrIfExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a virtual router interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrIfRowStatus variable." AUGMENTS { vRtrIfEntry } ::= { vRtrIfExtTable 1 } VRtrIfExtEntry ::= SEQUENCE { vRtrIfLsrIpLoadBalancing INTEGER, vRtrIfIngressIpv4Flowspec TruthValue, vRtrIfInfo OCTET STRING, vRtrIfInfoEncrypted TruthValue, vRtrIfQosRouteLookup INTEGER, vRtrIfIpv6QosRouteLookup INTEGER, vRtrIfStatusString DisplayString, vRtrIfIpv6uRPFCheckState TmnxEnabledDisabled, vRtrIfIpv6uRPFCheckMode INTEGER, vRtrIfTmsOffRampVprn TmnxServId, vRtrIfTmsMgmtVprn TmnxServId } vRtrIfLsrIpLoadBalancing OBJECT-TYPE SYNTAX INTEGER { system (0), label-only (1), label-ip (2), ip-only (3) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfLsrIpLoadBalancing specifies whether the IP Header is used in the LAG and ECMP LSR hashing algorithm. This is the per interface setting. When set to 'label-only (1)' only the label is used in the hashing algorithm. When set to 'label-ip (2)', the IP Header is included in the hashing algorithm. When set to 'ip-only (3)' the IP Header is used exclusively in the hashing Algorithm. When set to 'system (0)', the hashing algorithm is inherited from the object tmnxLsrIpLoadBalancing." DEFVAL { system } ::= { vRtrIfExtEntry 1 } vRtrIfIngressIpv4Flowspec OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIngressIpv4Flowspec specifies whether ingress Flowspec for IPv4 is enabled for this interface." DEFVAL { false } ::= { vRtrIfExtEntry 2 } vRtrIfInfo OBJECT-TYPE SYNTAX OCTET STRING (SIZE(0..257)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfInfo specifies the information used to authenticate the interface." DEFVAL { ''h } ::= { vRtrIfExtEntry 3 } vRtrIfInfoEncrypted OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS obsolete DESCRIPTION "The object vRtrIfInfoEncrypted is currently not supported." DEFVAL { true } ::= { vRtrIfExtEntry 4 } vRtrIfQosRouteLookup OBJECT-TYPE SYNTAX INTEGER { none (0), destination (1), source (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfQosRouteLookup specifies whether QoS classification of the ingress IP packets based on the route lookup is enabled for ipv4 on this router interface. By default the value of vRtrIfQosRouteLookup is set to 'none (0)', which means the Qos classification of incoming IP packets based on the route lookup is disabled for ipv4 on this interface. When the value of vRtrIfQosRouteLookup is 'destination (1)', the QoS route lookup is enabled and the Qos classification of incoming IP packets is based on the destination address matching. When the value of vRtrIfQosRouteLookup is 'source (2)', the QoS route lookup is enabled and the Qos classification of incoming IP packets is based on the source address matching." DEFVAL { none } ::= { vRtrIfExtEntry 5 } vRtrIfIpv6QosRouteLookup OBJECT-TYPE SYNTAX INTEGER { none (0), destination (1) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpv6QosRouteLookup specifies whether QoS classification of the ingress IP packets based on the route lookup is enabled for ipv6 on this router interface. By default the value of vRtrIfIpv6QosRouteLookup is 'none (0)', which means the Qos classification of incoming IP packets based on the route lookup is disabled on this interface. When the value of vRtrIfIpv6QosRouteLookup is 'destination (1)', the QoS route lookup is enabled and the Qos classification of incoming IP packets is based on the destination address matching." DEFVAL { none } ::= { vRtrIfExtEntry 6 } vRtrIfStatusString OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfStatusString indicates the status information about the interface." ::= { vRtrIfExtEntry 7 } vRtrIfIpv6uRPFCheckState OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpv6uRPFCheckState specifies whether unicast RPF (uRPF) check is enabled on this interface." DEFVAL { disabled } ::= { vRtrIfExtEntry 8 } vRtrIfIpv6uRPFCheckMode OBJECT-TYPE SYNTAX INTEGER { strict (1), loose (2) } MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpv6uRPFCheckMode specifies the mode of unicast RPF check. By default the value of vRtrIfIpv6uRPFCheckMode is 'strict (0)',which means that uRPF checks whether the incoming packet has a source address that matches a prefix in the routing table, and whether the interface expects to recieve a packet with this source address prefix. When the value of vRtrIfIpv6uRPFCheckMode is 'loose (1)', the uRPF checks whether the incoming packet has a source address with a corresponding prefix in the routing table. It does not check whether the interface expects to recieve a packet with a specific source address prefix. This object is valid only when value of vRtrIfIpv6uRPFCheckState is set to 'enabled'." DEFVAL { strict } ::= { vRtrIfExtEntry 9 } vRtrIfTmsOffRampVprn OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The vRtrIfTmsOffRampVprn specifies the off-ramp VPRN service associated with this threat-management service (TMS) interface. An 'inconsistentValue' error is returned when this object is set to a non-default value when vRtrIfType is not set to 'tmsService'. An 'inconsistentValue' error is returned when this object is set to a different value when vRtrIfRowStatus is set to 'active'." DEFVAL { 0 } ::= { vRtrIfExtEntry 10 } vRtrIfTmsMgmtVprn OBJECT-TYPE SYNTAX TmnxServId MAX-ACCESS read-create STATUS current DESCRIPTION "The vRtrIfTmsMgmtVprn specifies the management VPRN service associated with this threat-management service (TMS) interface. An 'inconsistentValue' error is returned when this object is set to a non-default value when vRtrIfType is not set to 'tmsService'. An 'inconsistentValue' error is returned when this object is set to a different value when vRtrIfRowStatus is set to 'active'." DEFVAL { 0 } ::= { vRtrIfExtEntry 11 } -- -- Point to Multi-point Resource Reservation protocol (P2MP RSVP) tunnel -- interface Bi-directional Forwarding Detection (BFD) RSVP Entry table. -- vRtrRsvpTunIfTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrRsvpTunIfTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrRsvpTunIfEntryTable by adding, deleting an entry or change to a writable object in the table." ::= { tmnxVRtrObjs 62 } vRtrRsvpTunIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrRsvpTunIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrRsvpTunIfEntryTable has an entry for each P2MP RSVP tunnel interface configured in the system." ::= { tmnxVRtrObjs 63 } vRtrRsvpTunIfEntry OBJECT-TYPE SYNTAX VRtrRsvpTunIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrRsvpTunIfEntryTable represents a P2MP RSVP tunnel interface on this router. Entries can be created and deleted via SNMP SET operations using the vRtrRsvpTunIfRowStatus variable." INDEX { vRtrID, vRtrRsvpTunIfLspName, vRtrRsvpTunIfSenderAddrType, vRtrRsvpTunIfSenderAddr } ::= { vRtrRsvpTunIfEntryTable 1 } VRtrRsvpTunIfEntry ::= SEQUENCE { vRtrRsvpTunIfLspName TNamedItem, vRtrRsvpTunIfSenderAddrType InetAddressType, vRtrRsvpTunIfSenderAddr InetAddress, vRtrRsvpTunIfRowStatus RowStatus, vRtrRsvpTunIfLastChanged TimeStamp, vRtrRsvpTunIfSessionId Unsigned32, vRtrRsvpTunIfTransmitInt Unsigned32, vRtrRsvpTunIfMultiplier Unsigned32, vRtrRsvpTunIfStandbyLspName TNamedItem, vRtrRsvpTunIfStandbyAddrType InetAddressType, vRtrRsvpTunIfStandbyAddr InetAddress, vRtrRsvpTunIfIfIndex InterfaceIndex, vRtrRsvpTunIfHoldTimer Unsigned32, vRtrRsvpTunIfStandbySessionId Unsigned32, vRtrRsvpTunIfStandbyIfIndex InterfaceIndex, vRtrRsvpTunIfDescription TItemDescription } vRtrRsvpTunIfLspName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrRsvpTunIfLspName indicates the LSP name of the P2MP RSVP tunnel interface." ::= { vRtrRsvpTunIfEntry 1 } vRtrRsvpTunIfSenderAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSenderAddrType indicates the type of address of an RSVP sender for the P2MP RSVP tunnel interface instance." ::= { vRtrRsvpTunIfEntry 2 } vRtrRsvpTunIfSenderAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSenderAddr indicates the address of an RSVP sender for the P2MP RSVP tunnel interface instance." ::= { vRtrRsvpTunIfEntry 3 } vRtrRsvpTunIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table." ::= { vRtrRsvpTunIfEntry 4 } vRtrRsvpTunIfLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrRsvpTunIfLastChanged indicates the timestamp of the last change to this row in vRtrRsvpTunIfEntryTable." ::= { vRtrRsvpTunIfEntry 5 } vRtrRsvpTunIfSessionId OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSessionId specifies the discriminator for a BFD session for this P2MP RSVP tunnel interface. When vRtrRsvpTunIfSessionId has a value of 0, the BFD session is not operational. This identifier needs to be unique within a tunnel interface." DEFVAL { 0 } ::= { vRtrRsvpTunIfEntry 6 } vRtrRsvpTunIfTransmitInt OBJECT-TYPE SYNTAX Unsigned32 (0|100..100000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfTransmitInt specifies the transmit interval for a BFD session for this P2MP RSVP tunnel interface. When vRtrRsvpTunIfTransmitInt has a value of 0, the transmit interval is not applicable." DEFVAL { 100 } ::= { vRtrRsvpTunIfEntry 7 } vRtrRsvpTunIfMultiplier OBJECT-TYPE SYNTAX Unsigned32 (0|3..20) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfMultiplier specifies the multiplier to detect if a BFD session is down for this P2MP RSVP tunnel interface. When vRtrRsvpTunIfMultiplier has a value of 0, the multiplier is not applicable." DEFVAL { 3 } ::= { vRtrRsvpTunIfEntry 8 } vRtrRsvpTunIfStandbyLspName OBJECT-TYPE SYNTAX TNamedItem MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfStandbyLspName specifies the LSP name of the standby P2MP RSVP tunnel interface." DEFVAL { ''H } ::= { vRtrRsvpTunIfEntry 9 } vRtrRsvpTunIfStandbyAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfStandbyAddrType specifies the address type of the standby P2MP RSVP tunnel interface." DEFVAL { unknown } ::= { vRtrRsvpTunIfEntry 10 } vRtrRsvpTunIfStandbyAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfStandbyAddr specifies the standby address of the standby P2MP RSVP tunnel interface." DEFVAL { ''H } ::= { vRtrRsvpTunIfEntry 11 } vRtrRsvpTunIfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrRsvpTunIfIfIndex indicates the tunnel interface index of the P2MP RSVP tunnel interface. It is a unique value among entries with the same value of vRtrID." ::= { vRtrRsvpTunIfEntry 12 } vRtrRsvpTunIfHoldTimer OBJECT-TYPE SYNTAX Unsigned32 (1..30) UNITS "seconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfHoldTimer specifies the time interval that a leaf node waits after a BFD session over a primary P2MP RSVP tunnel interface is restored and before it programs multicast records to accept traffic from that primary tunnel interface." DEFVAL { 10 } ::= { vRtrRsvpTunIfEntry 13 } vRtrRsvpTunIfStandbySessionId OBJECT-TYPE SYNTAX Unsigned32 (0 | 1..4000) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfStandbySessionId specifies the discriminator for a BFD session over the standby P2MP RSVP tunnel interface. When vRtrRsvpTunIfStandbySessionId has a value of 0, the BFD session is not operational. This identifier needs to be unique within a tunnel interface." DEFVAL { 0 } ::= { vRtrRsvpTunIfEntry 14 } vRtrRsvpTunIfStandbyIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrRsvpTunIfStandbyIfIndex indicates the tunnel interface index of the standby P2MP RSVP tunnel interface." ::= { vRtrRsvpTunIfEntry 15 } vRtrRsvpTunIfDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfDescription specifies a user provided description string for this rsvp tunnel-interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } -- the empty string ::= { vRtrRsvpTunIfEntry 16 } -- -- Point to Multi-point Resource Reservation protocol (P2MP RSVP) tunnel -- interface Bi-directional Forwarding Detection RSVP Source Entry table. -- vRtrRsvpTunIfSrcTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSrcTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrRsvpTunIfSrcEntryTable by adding, deleting an entry or change to a writable object in the table." ::= { tmnxVRtrObjs 64 } vRtrRsvpTunIfSrcEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrRsvpTunIfSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrRsvpTunIfSrcEntryTable has an entry for each multicast source tracked by BFD over a P2MP RSVP tunnel interface." ::= { tmnxVRtrObjs 65 } vRtrRsvpTunIfSrcEntry OBJECT-TYPE SYNTAX VRtrRsvpTunIfSrcEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a multicast source tracked by BFD over P2MP RSVP tunnel interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrRsvpTunIfSrcRowStatus variable." INDEX { vRtrID, vRtrRsvpTunIfLspName, vRtrRsvpTunIfSenderAddrType, vRtrRsvpTunIfSenderAddr, vRtrRsvpTunIfSrcAddrType, vRtrRsvpTunIfSrcAddr } ::= { vRtrRsvpTunIfSrcEntryTable 1 } VRtrRsvpTunIfSrcEntry ::= SEQUENCE { vRtrRsvpTunIfSrcAddrType InetAddressType, vRtrRsvpTunIfSrcAddr InetAddress, vRtrRsvpTunIfSrcRowStatus RowStatus, vRtrRsvpTunIfSrcLastChanged TimeStamp, vRtrRsvpTunIfSrcBfdEnable TruthValue, vRtrRsvpTunIfSrcSessionId Unsigned32, vRtrRsvpTunIfSrcTransmitInt Unsigned32, vRtrRsvpTunIfSrcMultiplier Unsigned32, vRtrRsvpTunIfSrcStandbySessionId Unsigned32 } vRtrRsvpTunIfSrcAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSrcAddrType indicates the type of address of a multicast source for the P2MP RSVP tunnel interface." ::= { vRtrRsvpTunIfSrcEntry 1 } vRtrRsvpTunIfSrcAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSrcAddr indicates the address of a multicast source for the P2MP RSVP tunnel interface." ::= { vRtrRsvpTunIfSrcEntry 2 } vRtrRsvpTunIfSrcRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSrcRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table." ::= { vRtrRsvpTunIfSrcEntry 3 } vRtrRsvpTunIfSrcLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSrcLastChanged indicates the timestamp of the last change to this row in vRtrRsvpTunIfSrcEntryTable." ::= { vRtrRsvpTunIfSrcEntry 4 } vRtrRsvpTunIfSrcBfdEnable OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSrcBfdEnable specifies if the BFD session to track the multicast source over the P2MP RSVP tunnel interface is enabled or not." DEFVAL { false } ::= { vRtrRsvpTunIfSrcEntry 5 } vRtrRsvpTunIfSrcSessionId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSrcSessionId specifies the discriminator for a BFD session to track the multicast source over the P2MP RSVP tunnel interface. When vRtrRsvpTunIfSrcSessionId has a value of 0, the BFD session is not operational. This Id needs to be unique within a tunnel interface." DEFVAL { 0 } ::= { vRtrRsvpTunIfSrcEntry 6 } vRtrRsvpTunIfSrcTransmitInt OBJECT-TYPE SYNTAX Unsigned32 (0|100..100000) UNITS "milliseconds" MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSrcTransmitInt specifies the transmit interval for a BFD session to track the multicast source over the P2MP RSVP tunnel interface. When vRtrRsvpTunIfSrcTransmitInt has a value of 0, the transmit interval is not applicable." DEFVAL { 100 } ::= { vRtrRsvpTunIfSrcEntry 7 } vRtrRsvpTunIfSrcMultiplier OBJECT-TYPE SYNTAX Unsigned32 (0|3..20) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSrcMultiplier specifies the multiplier to detect if a BFD session to track the multicast source over the P2MP RSVP tunnel interface is down. When vRtrRsvpTunIfSrcMultiplier has a value of 0, the multiplier is not applicable." DEFVAL { 3 } ::= { vRtrRsvpTunIfSrcEntry 8 } vRtrRsvpTunIfSrcStandbySessionId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrRsvpTunIfSrcStandbySessionId specifies the discriminator for a BFD session to track the multicast source over the standby P2MP RSVP tunnel interface. When vRtrRsvpTunIfSrcStandbySessionId has a value of 0, the BFD session is not operational. This Id needs to be unique within a tunnel interface." DEFVAL { 0 } ::= { vRtrRsvpTunIfSrcEntry 9 } -- -- Point to Multi-point Resource Reservation protocol (P2MP RSVP) tunnel -- interface Bi-directional Forwarding Detection Label Distribution Protocol -- (LDP) Entry table. -- vRtrLdpTunIfTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrLdpTunIfTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrLdpTunIfEntryTable by adding, deleting an entry or change to a writable object in the table." ::= { tmnxVRtrObjs 66 } vRtrLdpTunIfEntryTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrLdpTunIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrLdpTunIfEntryTable has an entry for each Ldp tunnel configured in the system. Each row entry represents a virtual router LDP tunnel interface in the system." ::= { tmnxVRtrObjs 67 } vRtrLdpTunIfEntry OBJECT-TYPE SYNTAX VRtrLdpTunIfEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents an Ldp tunnel interface in the system. Entries can be created and deleted via SNMP SET operations using the vRtrLdpTunIfRowStatus variable." INDEX { vRtrID, vRtrLdpTunIfP2mpId, vRtrLdpTunIfSenderAddrType, vRtrLdpTunIfSenderAddr } ::= { vRtrLdpTunIfEntryTable 1 } VRtrLdpTunIfEntry ::= SEQUENCE { vRtrLdpTunIfP2mpId Unsigned32, vRtrLdpTunIfSenderAddrType InetAddressType, vRtrLdpTunIfSenderAddr InetAddress, vRtrLdpTunIfRowStatus RowStatus, vRtrLdpTunIfLastChanged TimeStamp, vRtrLdpTunIfIfIndex InterfaceIndex, vRtrLdpTunIfDescription TItemDescription, vRtrLdpTunIfRootNode TruthValue } vRtrLdpTunIfP2mpId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrLdpTunIfP2mpId indicates the LDP P2MP identifier." ::= { vRtrLdpTunIfEntry 1 } vRtrLdpTunIfSenderAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrLdpTunIfSenderAddrType indicates the type of address of an LDP sender for the P2MP RSVP tunnel interface instance." ::= { vRtrLdpTunIfEntry 2 } vRtrLdpTunIfSenderAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrLdpTunIfSenderAddr indicates the address of an LDP sender for the P2MP RSVP tunnel interface instance." ::= { vRtrLdpTunIfEntry 3 } vRtrLdpTunIfRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of the object vRtrLdpTunIfRowStatus specifies the Row status of this table row. This object is used to create or delete rows in this table. The value of the object 'vRtrLdpTunIfRootNode' specifies if the given ldp-p2mp tunnel interface instance is a root-node for that tunnel interface.The value of this object must be specified when the row is created and cannot be changed while 'vRtrLdpTunIfRowStatus' is 'active'." ::= { vRtrLdpTunIfEntry 4 } vRtrLdpTunIfLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrLdpTunIfLastChanged indicates the timestamp of the last change to this row in vRtrLdpTunIfEntryTable." ::= { vRtrLdpTunIfEntry 5 } vRtrLdpTunIfIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrLdpTunIfIfIndex indicates the interface index of the virtual router LDP tunnel interface. It is a unique value among entries with the same value of vRtrID." ::= { vRtrLdpTunIfEntry 6 } vRtrLdpTunIfDescription OBJECT-TYPE SYNTAX TItemDescription MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrLdpTunIfDescription specifies a user provided description string for this ldp tunnel-interface. It can consist of any printable, seven-bit ASCII characters up to 80 characters in length." DEFVAL { ''H } -- the empty string ::= { vRtrLdpTunIfEntry 7 } vRtrLdpTunIfRootNode OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrLdpTunIfRootNode specifies if the given ldp-p2mp tunnel interface instance is a root-node for that tunnel interface. The value of this object must be specified when the row is created and cannot be changed while 'vRtrLdpTunIfRowStatus' is 'active'. An 'inconsistentValue' error is returned if an attempt is made to set this object individually." ::= { vRtrLdpTunIfEntry 8 } vRtrInetCidrRteTnlExtTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetCidrRteTnlExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrInetCidrRteTnlExtTable provides an extension of the inetCidrRouteTable in the IP-FORWARD-MIB, by adding three indexes and displays only tunneled routes." ::= { tmnxVRtrObjs 68 } vRtrInetCidrRteTnlExtEntry OBJECT-TYPE SYNTAX VRtrInetCidrRteTnlExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrInetCidrRteTnlExtTable represents an entry for a tunneled route on the Alcatel-Lucent SROS series." INDEX { inetCidrRouteDestType, inetCidrRouteDest, inetCidrRoutePfxLen, inetCidrRoutePolicy, inetCidrRouteNextHopType, inetCidrRouteNextHop, vRtrInetCidrRteTnlNextHopType, vRtrInetCidrRteTnlNextHopOwner, vRtrInetCidrRteTnlNextHopTnlId } ::= { vRtrInetCidrRteTnlExtTable 1 } VRtrInetCidrRteTnlExtEntry ::= SEQUENCE { vRtrInetCidrRteTnlNextHopType TmnxInetCidrNextHopType, vRtrInetCidrRteTnlNextHopOwner TmnxInetCidrNextHopOwner, vRtrInetCidrRteTnlNextHopTnlId Unsigned32, vRtrInetCidrRteTnlEnabledTime TimeStamp } vRtrInetCidrRteTnlNextHopType OBJECT-TYPE SYNTAX TmnxInetCidrNextHopType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetCidrRteTnlNextHopType indicates the type of next hop for this route." ::= { vRtrInetCidrRteTnlExtEntry 1 } vRtrInetCidrRteTnlNextHopOwner OBJECT-TYPE SYNTAX TmnxInetCidrNextHopOwner MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetCidrRteTnlNextHopOwner indicates the owner of next hop for this route." ::= { vRtrInetCidrRteTnlExtEntry 2 } vRtrInetCidrRteTnlNextHopTnlId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional table index provided to distinguish between multiple RSVP tunnel-ids to same destination with the same vRtrInetCidrRteTnlNextHopType and vRtrInetCidrRteTnlNextHopOwner." ::= { vRtrInetCidrRteTnlExtEntry 3 } vRtrInetCidrRteTnlEnabledTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The vRtrInetCidrRteTnlEnabledTime variable indicates the sysUpTime value for this route entry." ::= { vRtrInetCidrRteTnlExtEntry 4 } -- -- Virtual Router Interface Bi-directional Forwarding Detection table -- vRtrIfBfdExtTableLastChanged OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdExtTableLastChanged indicates the sysUpTime at the time of the last modification to vRtrIfBfdExtTable by adding, deleting an entry or change to a writable object in the table." ::= { tmnxVRtrObjs 70 } vRtrIfBfdExtTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfBfdExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfBfdExtTable table contains the configuration for Bi-directional Forwarding Detection (BFD) on the vRtrIfIndex." ::= { tmnxVRtrObjs 71 } vRtrIfBfdExtEntry OBJECT-TYPE SYNTAX VRtrIfBfdExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the BFD configuration for the vRtrIfIndex." INDEX { vRtrID, vRtrIfIndex, vRtrIfBfdExtAddressType } ::= { vRtrIfBfdExtTable 1 } VRtrIfBfdExtEntry ::= SEQUENCE { vRtrIfBfdExtAddressType InetAddressType, vRtrIfBfdExtAdminState TmnxAdminState, vRtrIfBfdExtTransmitInterval Unsigned32, vRtrIfBfdExtReceiveInterval Unsigned32, vRtrIfBfdExtMultiplier Unsigned32, vRtrIfBfdExtEchoInterval Unsigned32, vRtrIfBfdExtType INTEGER } vRtrIfBfdExtAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIfBfdExtAddressType indicates the IP address type of the BFD configuration of this interface. vRtrIfBfdExtAddressType supports only InetAddressType values 'ipv4 (1)' and 'ipv6 (2)'." ::= { vRtrIfBfdExtEntry 1 } vRtrIfBfdExtAdminState OBJECT-TYPE SYNTAX TmnxAdminState MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrIfBfdExtAdminState specifies the admin state of BFD on this interface. When the value of vRtrIfBfdExtAdminState is 'inService', BFD sessions can be established on this interface. When it is 'outOfService', they cannot." ::= { vRtrIfBfdExtEntry 2 } vRtrIfBfdExtTransmitInterval OBJECT-TYPE SYNTAX Unsigned32 (10..100000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrIfBfdExtTransmitInterval specifies the BFD transmit interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdExtType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds." DEFVAL { 100 } ::= { vRtrIfBfdExtEntry 3 } vRtrIfBfdExtReceiveInterval OBJECT-TYPE SYNTAX Unsigned32 (10..100000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrIfBfdExtReceiveInterval specifies the BFD receive interval over this interface. The minimum accepted value depends on the value of vRtrIfBfdExtType, as follows: 'cpmNp(1)' : 10 milliseconds 'auto(2)' : 100 milliseconds." DEFVAL { 100 } ::= { vRtrIfBfdExtEntry 4 } vRtrIfBfdExtMultiplier OBJECT-TYPE SYNTAX Unsigned32 (3..20) MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrIfBfdExtMultiplier specifies the the number of consecutive BFD messages that must be missed from the peer before the BFD session state is changed to down and the upper level protocols (OSPF, IS-IS or PIM) are notified of the fault." DEFVAL { 3 } ::= { vRtrIfBfdExtEntry 5 } vRtrIfBfdExtEchoInterval OBJECT-TYPE SYNTAX Unsigned32 (0|100..100000) UNITS "milliseconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrIfBfdExtEchoInterval specifies the BFD echo interval over this interface." DEFVAL { 0 } ::= { vRtrIfBfdExtEntry 6 } vRtrIfBfdExtType OBJECT-TYPE SYNTAX INTEGER { cpmNp(1), auto(2), iomHw(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "The value of vRtrIfBfdExtType specifies the configured termination of a BFD session on this interface. The value of 'cpmNp(1)' specifies termination on the CPM card's Network Processor. The value of 'auto(2)' specifies a system-selected termination other than the CPM Network Processor." DEFVAL { auto } ::= { vRtrIfBfdExtEntry 7 } -- -- Virtual Router Interface IP Reassembly table -- vRtrIfIpReasTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfIpReasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfIpReasTable table contains the configuration for IP Reassembly on the vRtrIfEntry with the same indices." ::= { tmnxVRtrObjs 72 } vRtrIfIpReasEntry OBJECT-TYPE SYNTAX VRtrIfIpReasEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the IP Reassembly configuration for an interface. Entries are created and deleted when entries in the vRtrIfTable are created and deleted." AUGMENTS { vRtrIfEntry } ::= { vRtrIfIpReasTable 1 } VRtrIfIpReasEntry ::= SEQUENCE { vRtrIfIpReasPortID TmnxPortID, vRtrIfIpReasContextValue TmnxReasContextVal } vRtrIfIpReasPortID OBJECT-TYPE SYNTAX TmnxPortID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpReasPortID specifies the physical port which performs IP reassembly. When vRtrIfIpReasPortID is zero (0), then there is no IP reassembly supported on the IP interface." DEFVAL { 0 } ::= { vRtrIfIpReasEntry 1 } vRtrIfIpReasContextValue OBJECT-TYPE SYNTAX TmnxReasContextVal MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfIpReasContextValue along with vRtrIfIpReasPortID specifies the reassembly context in a given virtual router instance." ::= { vRtrIfIpReasEntry 2 } -- -- Multi-segment pseudo-wire LDP FEC-129 Layer-2 Route Table -- vRtrMsPwL2RtTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMsPwL2RtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMsPwL2RtTable contains LDP FEC-129 Attachment Individual Identifier (AII) type 2 layer-2 route table entries used by multi-segment pseudo-wire." ::= { tmnxVRtrObjs 73 } vRtrMsPwL2RtEntry OBJECT-TYPE SYNTAX VRtrMsPwL2RtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMsPwL2RtEntry consists of the mutli-segment pseudo-wire LDP FEC-129 layer 2 route entry information." INDEX { vRtrMsPwL2RtDestGlobalId, vRtrMsPwL2RtDestPrefix, vRtrMsPwL2RtDestAcId, vRtrMsPwL2RtDestPrefixLen, vRtrMsPwL2RtNextHopOwner, vRtrMsPwL2RtDestRD, vRtrMsPwL2RtNextHopAddrType, vRtrMsPwL2RtNextHopAddr } ::= { vRtrMsPwL2RtTable 1 } VRtrMsPwL2RtEntry ::= SEQUENCE { vRtrMsPwL2RtDestGlobalId TmnxPwGlobalIdOrZero, vRtrMsPwL2RtDestPrefix Unsigned32, vRtrMsPwL2RtDestAcId Unsigned32, vRtrMsPwL2RtDestPrefixLen InetAddressPrefixLength, vRtrMsPwL2RtDestRD TmnxVPNRouteDistinguisher, vRtrMsPwL2RtNextHopAddrType InetAddressType, vRtrMsPwL2RtNextHopAddr InetAddress, vRtrMsPwL2RtNextHopOwner TmnxL3RouteOwner, vRtrMsPwL2RtRDCommunity Unsigned32, vRtrMsPwL2RtIsBestRoute TruthValue, vRtrMsPwL2RtAge Gauge32 } vRtrMsPwL2RtDestGlobalId OBJECT-TYPE SYNTAX TmnxPwGlobalIdOrZero MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMsPwL2RtDestGlobalId specifies the global identifier of Attachment Individual Identifier (AII) portion of the Generalized Id FEC element of the destination of the route-entry." ::= { vRtrMsPwL2RtEntry 1 } vRtrMsPwL2RtDestPrefix OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMsPwL2RtDestPrefix specifies the prefix to the Attachment Individual Identifier (AII) portion of the Generalized Id FEC element of the destination of the route-entry." ::= { vRtrMsPwL2RtEntry 2 } vRtrMsPwL2RtDestAcId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMsPwL2RtDestAcId specifies the attachment circuit identifier part of Attachment Individual Identifier (AII) portion of the Generalized Id FEC element of the destination of the route-entry." ::= { vRtrMsPwL2RtEntry 3 } vRtrMsPwL2RtDestPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMsPwL2RtDestPrefix specifies the length of the prefix to the Attachment Individual Identifier (AII) portion of the Generalized Id FEC element of the destination of the route-entry." ::= { vRtrMsPwL2RtEntry 4 } vRtrMsPwL2RtDestRD OBJECT-TYPE SYNTAX TmnxVPNRouteDistinguisher MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMsPwL2RtDestRD indicates an identifier attached to routes that distinguishes to which VPN it belongs." ::= { vRtrMsPwL2RtEntry 5 } vRtrMsPwL2RtNextHopAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMsPwL2RtNextHopAddrType indicates the address type of vRtrMsPwL2RtNextHopAddr object." ::= { vRtrMsPwL2RtEntry 6 } vRtrMsPwL2RtNextHopAddr OBJECT-TYPE SYNTAX InetAddress (SIZE (4|16)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMsPwL2RtNextHopAddr indicates the address of the next hop in the LDP FEC-129 route-entry." ::= { vRtrMsPwL2RtEntry 7 } vRtrMsPwL2RtNextHopOwner OBJECT-TYPE SYNTAX TmnxL3RouteOwner MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrMsPwL2RtNextHopOwner indicates the owner of the next hop in the LDP FEC-129 route-entry." ::= { vRtrMsPwL2RtEntry 8 } vRtrMsPwL2RtRDCommunity OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrMsPwL2RtRDCommunity indicates the BGP community associated with the route-distinguisher in the LDP FEC-129 route-entry." ::= { vRtrMsPwL2RtEntry 9 } vRtrMsPwL2RtIsBestRoute OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrMsPwL2RtIsBestRoute indiates the best route from the destination to the next hop." ::= { vRtrMsPwL2RtEntry 10 } vRtrMsPwL2RtAge OBJECT-TYPE SYNTAX Gauge32 UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrMsPwL2RtAge indicates the number of seconds since this route was last updated or otherwise determined to be correct." ::= { vRtrMsPwL2RtEntry 11 } -- -- Virtual Router Interface Statistics Extension Table -- vRtrIfStatsExtTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfStatsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfStatsExtTable table contains statistics per virtual router interface." ::= { tmnxVRtrObjs 74 } vRtrIfStatsExtEntry OBJECT-TYPE SYNTAX VRtrIfStatsExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents the statistics per virtual router interface. Entries are created and deleted when entries in the vRtrIfEntry are created and deleted." AUGMENTS { vRtrIfStatsEntry } ::= { vRtrIfStatsExtTable 1 } VRtrIfStatsExtEntry ::= SEQUENCE { vRtrIfTxPkts Counter64, vRtrIfTxPktsLow32 Counter32, vRtrIfTxPktsHigh32 Counter32, vRtrIfTxBytes Counter64, vRtrIfTxBytesLow32 Counter32, vRtrIfTxBytesHigh32 Counter32 } vRtrIfTxPkts OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxPkts indicates the number of total packets sent by this interface." ::= { vRtrIfStatsExtEntry 1 } vRtrIfTxPktsLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxPktsLow32 indicates the lower 32 bits of the value of vRtrIfTxPkts." ::= { vRtrIfStatsExtEntry 2 } vRtrIfTxPktsHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxPktsHigh32 indicates the high 32 bits of the value of vRtrIfTxPkts." ::= { vRtrIfStatsExtEntry 3 } vRtrIfTxBytes OBJECT-TYPE SYNTAX Counter64 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxBytes indicates the number of total bytes sent by this interface." ::= { vRtrIfStatsExtEntry 4 } vRtrIfTxBytesLow32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxBytesLow32 indicates the lower 32 bits of the value of vRtrIfTxBytes." ::= { vRtrIfStatsExtEntry 5 } vRtrIfTxBytesHigh32 OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfTxBytesHigh32 indicates the high 32 bits of the value of vRtrIfTxBytes." ::= { vRtrIfStatsExtEntry 6 } -- -- Alcatel-Lucent SROS series Virtual Router Statistics Extension Table -- -- Augmentation of the vRtrConfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, vRtrConfTable, and the augmenting table, vRtrStatExtTable. -- This in effect extends the vRtrConfTable with additional columns. -- Creation (or deletion) of a row in the vRtrConfTable results in the same -- fate for the row in the vRtrStatExtTable. -- vRtrStatExtTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrStatExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrStatExtTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 75 } vRtrStatExtEntry OBJECT-TYPE SYNTAX VRtrStatExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of statistics for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrConfEntry } ::= { vRtrStatExtTable 1 } VRtrStatExtEntry ::= SEQUENCE { vRtrISISAltRoutes Gauge32, vRtrISISActiveAltRoutes Gauge32, vRtrBGPAltRoutes Gauge32, vRtrBGPActiveAltRoutes Gauge32, vRtrStatCurrNumAltRoutes Gauge32, vRtrV6ISISAltRoutes Gauge32, vRtrV6ISISActiveAltRoutes Gauge32, vRtrV6BGPAltRoutes Gauge32, vRtrV6BGPActiveAltRoutes Gauge32, vRtrV6StatCurrNumAltRoutes Gauge32, vRtrBGPVPNAltRoutes Gauge32, vRtrBGPVPNActiveAltRoutes Gauge32, vRtrV6BGPVPNAltRoutes Gauge32, vRtrV6BGPVPNActiveAltRoutes Gauge32, vRtrOSPFAltRoutes Gauge32, vRtrOSPFActiveAltRoutes Gauge32, vRtrV6OSPFAltRoutes Gauge32, vRtrV6OSPFActiveAltRoutes Gauge32 } vRtrISISAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrISISAltRoutes indicates the current number of alternate ISIS routes for this instance of the route table." ::= { vRtrStatExtEntry 1 } vRtrISISActiveAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrISISActiveAltRoutes indicates the current number of alternate ISIS routes that are active for this instance of the route table." ::= { vRtrStatExtEntry 2 } vRtrBGPAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrBGPAltRoutes indicates the current number of alternate BGP routes for this instance of the route table." ::= { vRtrStatExtEntry 3 } vRtrBGPActiveAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrBGPActiveAltRoutes indicates the current number of alternate BGP routes that are active for this instance of the route table." ::= { vRtrStatExtEntry 4 } vRtrStatCurrNumAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrStatCurrNumAltRoutes indicates the current number of total alternate routes for this instance of the route table." ::= { vRtrStatExtEntry 5 } vRtrV6ISISAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6ISISAltRoutes indicates the current number of IPv6 alternate ISIS routes for this instance of the route table." ::= { vRtrStatExtEntry 6 } vRtrV6ISISActiveAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6ISISActiveAltRoutes indicates the current number of IPv6 alternate ISIS routes that are active for this instance of the route table." ::= { vRtrStatExtEntry 7 } vRtrV6BGPAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6BGPAltRoutes indicates the current number of IPv6 alternate BGP routes for this instance of the route table." ::= { vRtrStatExtEntry 8 } vRtrV6BGPActiveAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6BGPActiveAltRoutes indicates the current number of IPv6 alternate BGP routes that are active for this instance of the route table." ::= { vRtrStatExtEntry 9 } vRtrV6StatCurrNumAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6StatCurrNumAltRoutes indicates the current number of IPv6 total alternate routes for this instance of the route table." ::= { vRtrStatExtEntry 10 } vRtrBGPVPNAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrBGPVPNAltRoutes indicates the current number of alternate BGP-VPN routes for this instance of the route table." ::= { vRtrStatExtEntry 11 } vRtrBGPVPNActiveAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrBGPVPNActiveAltRoutes indicates the current number of alternate BGP-VPN routes that are active for this instance of the route table." ::= { vRtrStatExtEntry 12 } vRtrV6BGPVPNAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6BGPVPNAltRoutes indicates the current number of IPv6 alternate BGP-VPN routes for this instance of the route table." ::= { vRtrStatExtEntry 13 } vRtrV6BGPVPNActiveAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6BGPVPNActiveAltRoutes indicates the current number of IPv6 alternate BGP-VPN routes that are active for this instance of the route table." ::= { vRtrStatExtEntry 14 } vRtrOSPFAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrOSPFAltRoutes indicates the current number of alternate OSPF routes for this instance of the route table." ::= { vRtrStatExtEntry 15 } vRtrOSPFActiveAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrOSPFActiveAltRoutes indicates the current number of alternate OSPF routes that are active for this instance of the route table." ::= { vRtrStatExtEntry 16 } vRtrV6OSPFAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6OSPFAltRoutes indicates the current number of IPv6 alternate OSPF routes for this instance of the route table." ::= { vRtrStatExtEntry 17 } vRtrV6OSPFActiveAltRoutes OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrV6OSPFActiveAltRoutes indicates the current number of IPv6 alternate OSPF routes that are active for this instance of the route table." ::= { vRtrStatExtEntry 18 } -- -- Alcatel-Lucent SROS series Virtual Router Policy Extension Table -- -- Augmentation of the vRtrConfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, vRtrConfTable, and the augmenting table, vRtrVrfPolicyTable. -- This in effect extends the vRtrConfTable with additional columns. -- Creation (or deletion) of a row in the vRtrConfTable results in the same -- fate for the row in the vRtrVrfPolicyTable. -- vRtrVrfPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrVrfPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrVrfPolicyTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 76 } vRtrVrfPolicyEntry OBJECT-TYPE SYNTAX VRtrVrfPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of policies for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrConfEntry } ::= { vRtrVrfPolicyTable 1 } VRtrVrfPolicyEntry ::= SEQUENCE { vRtrVrfImportPolicy1 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy2 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy3 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy4 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy5 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy6 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy7 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy8 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy9 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy10 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy11 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy12 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy13 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy14 TPolicyStatementNameOrEmpty, vRtrVrfImportPolicy15 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy1 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy2 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy3 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy4 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy5 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy6 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy7 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy8 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy9 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy10 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy11 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy12 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy13 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy14 TPolicyStatementNameOrEmpty, vRtrVrfExportPolicy15 TPolicyStatementNameOrEmpty } vRtrVrfImportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy1 specifies the first policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 1 } vRtrVrfImportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy2 specifies the second policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 2 } vRtrVrfImportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy3 specifies the third policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 3 } vRtrVrfImportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy4 specifies the fourth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 4 } vRtrVrfImportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy5 specifies the fifth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 5 } vRtrVrfImportPolicy6 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy6 specifies the sixth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 6 } vRtrVrfImportPolicy7 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy6 specifies the seventh policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 7 } vRtrVrfImportPolicy8 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy8 specifies the eighth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 8 } vRtrVrfImportPolicy9 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy9 specifies the ninth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 9 } vRtrVrfImportPolicy10 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy10 specifies the tenth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 10 } vRtrVrfImportPolicy11 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy11 specifies the eleventh policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 11 } vRtrVrfImportPolicy12 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy12 specifies the twelfth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 12 } vRtrVrfImportPolicy13 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy13 specifies the thirteenth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 13 } vRtrVrfImportPolicy14 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy14 specifies the fourteenth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 14 } vRtrVrfImportPolicy15 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfImportPolicy15 specifies the fifteenth policy to be used for determining which routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrVrfImportPolicy1 through vRtrVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 15 } vRtrVrfExportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy1 specifies the first policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 16 } vRtrVrfExportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy2 specifies the second policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 17 } vRtrVrfExportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy3 specifies the third policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 18 } vRtrVrfExportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy4 specifies the fourth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 19 } vRtrVrfExportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy5 specifies the fifth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 20 } vRtrVrfExportPolicy6 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy6 specifies the sixth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 21 } vRtrVrfExportPolicy7 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy6 specifies the seventh policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 22 } vRtrVrfExportPolicy8 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy8 specifies the eighth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 23 } vRtrVrfExportPolicy9 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy9 specifies the ninth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 24 } vRtrVrfExportPolicy10 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy10 specifies the tenth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 25 } vRtrVrfExportPolicy11 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy11 specifies the eleventh policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 26 } vRtrVrfExportPolicy12 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy12 specifies the twelfth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 27 } vRtrVrfExportPolicy13 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy13 specifies the thirteenth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 28 } vRtrVrfExportPolicy14 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy14 specifies the fourteenth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 29 } vRtrVrfExportPolicy15 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrVrfExportPolicy15 specifies the fifteenth policy to be used for determining which routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrVrfExportPolicy1 through vRtrVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrVrfPolicyEntry 30 } -- -- Alcatel-Lucent SROS series Virtual Router Multicast Policy Table -- -- Augmentation of the vRtrConfTable. -- Use of AUGMENTS clause implies a one-to-one dependent relationship between -- the base table, vRtrConfTable, and the augmenting table, -- vRtrMvpnVrfPolicyTable. -- This in effect extends the vRtrConfTable with additional columns. -- Creation (or deletion) of a row in the vRtrConfTable results in the same -- fate for the row in the vRtrMvpnVrfPolicyTable. -- vRtrMvpnVrfPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrMvpnVrfPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrMvpnVrfPolicyTable has an entry for each virtual router configured in the system." ::= { tmnxVRtrObjs 77 } vRtrMvpnVrfPolicyEntry OBJECT-TYPE SYNTAX VRtrMvpnVrfPolicyEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a collection of policies for a virtual router in the system. Entries cannot be created and deleted via SNMP SET operations." AUGMENTS { vRtrConfEntry } ::= { vRtrMvpnVrfPolicyTable 1 } VRtrMvpnVrfPolicyEntry ::= SEQUENCE { vRtrMvpnVrfImportPolicy1 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy2 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy3 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy4 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy5 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy6 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy7 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy8 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy9 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy10 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy11 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy12 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy13 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy14 TPolicyStatementNameOrEmpty, vRtrMvpnVrfImportPolicy15 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy1 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy2 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy3 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy4 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy5 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy6 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy7 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy8 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy9 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy10 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy11 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy12 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy13 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy14 TPolicyStatementNameOrEmpty, vRtrMvpnVrfExportPolicy15 TPolicyStatementNameOrEmpty } vRtrMvpnVrfImportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy1 specifies the first policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 1 } vRtrMvpnVrfImportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy2 specifies the second policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 2 } vRtrMvpnVrfImportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy3 specifies the third policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 3 } vRtrMvpnVrfImportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy4 specifies the fourth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 4 } vRtrMvpnVrfImportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy5 specifies the fifth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 5 } vRtrMvpnVrfImportPolicy6 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy6 specifies the sixth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 6 } vRtrMvpnVrfImportPolicy7 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy6 specifies the seventh policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 7 } vRtrMvpnVrfImportPolicy8 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy8 specifies the eighth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 8 } vRtrMvpnVrfImportPolicy9 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy9 specifies the ninth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 9 } vRtrMvpnVrfImportPolicy10 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy10 specifies the tenth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 10 } vRtrMvpnVrfImportPolicy11 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy11 specifies the eleventh policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 11 } vRtrMvpnVrfImportPolicy12 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy12 specifies the twelfth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 12 } vRtrMvpnVrfImportPolicy13 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy13 specifies the thirteenth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 13 } vRtrMvpnVrfImportPolicy14 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy14 specifies the fourteenth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 14 } vRtrMvpnVrfImportPolicy15 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfImportPolicy15 specifies the fifteenth policy to be used for determining which multicast routes are imported into the VRF for this virtual router. If no import policy is defined, no routes are accepted into the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The import policy name list, vRtrMvpnVrfImportPolicy1 through vRtrMvpnVrfImportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 15 } vRtrMvpnVrfExportPolicy1 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy1 specifies the first policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 16 } vRtrMvpnVrfExportPolicy2 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy2 specifies the second policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 17 } vRtrMvpnVrfExportPolicy3 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy3 specifies the third policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 18 } vRtrMvpnVrfExportPolicy4 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy4 specifies the fourth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 19 } vRtrMvpnVrfExportPolicy5 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy5 specifies the fifth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 20 } vRtrMvpnVrfExportPolicy6 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy6 specifies the sixth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 21 } vRtrMvpnVrfExportPolicy7 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy6 specifies the seventh policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 22 } vRtrMvpnVrfExportPolicy8 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy8 specifies the eighth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 23 } vRtrMvpnVrfExportPolicy9 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy9 specifies the ninth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 24 } vRtrMvpnVrfExportPolicy10 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy10 specifies the tenth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 25 } vRtrMvpnVrfExportPolicy11 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy11 specifies the eleventh policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 26 } vRtrMvpnVrfExportPolicy12 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy12 specifies the twelfth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 27 } vRtrMvpnVrfExportPolicy13 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy13 specifies the thirteenth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 28 } vRtrMvpnVrfExportPolicy14 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy14 specifies the fourteenth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 29 } vRtrMvpnVrfExportPolicy15 OBJECT-TYPE SYNTAX TPolicyStatementNameOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrMvpnVrfExportPolicy15 specifies the fifteenth policy to be used for determining which multicast routes are exported from the VRF for this virtual router. If no export policy is defined, no routes are exported from the VRF. If multiple policy names are specified, the policies are evaluated in the order they are specified. The first policy that matches is applied. The export policy name list, vRtrMvpnVrfExportPolicy1 through vRtrMvpnVrfExportPolicy5, is handled by the SNMP agent as a single entity. When an SNMP SET request is received to modify one or more of the policy names, all the policy variables are first set to the empty string, ''H, and then the new names are set into the specified policy variables within a single SNMP SET PDU." DEFVAL { ''H } -- the empty string ::= { vRtrMvpnVrfPolicyEntry 30 } -- -- Extension to Virtual Router Interfaces Table -- vRtrIfQosTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfQosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfQosTable has an entry for each router interface configured in the system. This table contains objects managing QoS on the interface. This table augments the vRtrIfTable." ::= { tmnxVRtrObjs 78 } vRtrIfQosEntry OBJECT-TYPE SYNTAX VRtrIfQosEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a virtual router interface QoS management objects in the system. Entries can be created and deleted via SNMP SET operations along with the associated row entry in vRtrIfTable using the vRtrIfRowStatus variable." AUGMENTS { vRtrIfEntry } ::= { vRtrIfQosTable 1 } VRtrIfQosEntry ::= SEQUENCE { vRtrIfQosNetworkPolicyId TNetworkPolicyID, vRtrIfQosEgrPortRedirectQGrp TNamedItemOrEmpty, vRtrIfQosEgrQGrpInstanceId TQosQGrpInstanceIDorZero, vRtrIfQosIngFpRedirectQGrp TNamedItemOrEmpty, vRtrIfQosIngQGrpInstanceId TQosQGrpInstanceIDorZero } vRtrIfQosNetworkPolicyId OBJECT-TYPE SYNTAX TNetworkPolicyID MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfQosNetworkPolicyId associates a pre-existing network-policy-id to a network interface. Packets are marked using qos policies on edge switches; invoking a qos policy on a network port allows for the packets that match the policy criteria to be remarked. If this entry indicates a service virtual router interface or the special out-of-band management interface, this object is meaningless and is not applied to the interface." DEFVAL { 1 } ::= { vRtrIfQosEntry 1 } vRtrIfQosEgrPortRedirectQGrp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfQosEgrPortRedirectQGrp specifies the name of the QoS queue-group (TIMETRA-QOS-MIB::tQosEgrQGroupName) used with this interface. An 'inconsistentValue' error is returned if this object is set to a non-default value and an entry corresponding to vRtrIfPortID does not exist in TIMETRA-PORT-MIB::tPortNetEgrQGrpTable." DEFVAL { ''H } ::= { vRtrIfQosEntry 2 } vRtrIfQosEgrQGrpInstanceId OBJECT-TYPE SYNTAX TQosQGrpInstanceIDorZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfQosEgrQGrpInstanceId specifies the instance of the forwarding-plane egress Queue Group for this interface." DEFVAL { 0 } ::= { vRtrIfQosEntry 3 } vRtrIfQosIngFpRedirectQGrp OBJECT-TYPE SYNTAX TNamedItemOrEmpty MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfQosIngFpRedirectQGrp specifies the forwarding-plane queue group Policy for this interface." DEFVAL { "" } ::= { vRtrIfQosEntry 4 } vRtrIfQosIngQGrpInstanceId OBJECT-TYPE SYNTAX TQosQGrpInstanceIDorZero MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrIfQosIngQGrpInstanceId specifies the instance of the forwarding-plane ingress Queue Group for this interface." DEFVAL { 0 } ::= { vRtrIfQosEntry 5 } -- -- Alcatel-Lucent SROS series Virtual Router DNS -- vRtrDnsTableLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of the object vRtrDnsTableLastCh indicates the value of sysUpTime at the time of the last modification of an entry in the vRtrDnsTable." ::= { tmnxVRtrObjs 79 } vRtrDnsTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrDnsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrDnsTable provides a sparse extension of the vRtrConfTable to configure DNS. Rows in this table are created and destroyed by means of SNMP set operations on the vRtrDnsRowStatus object." ::= { tmnxVRtrObjs 80 } vRtrDnsEntry OBJECT-TYPE SYNTAX VRtrDnsEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrDnsTable represents DNS configuration of a specific virtual router instance. For some virtual router instances, such as the Base router instance, it is not allowed to create a row in this table." INDEX { vRtrID } ::= { vRtrDnsTable 1 } VRtrDnsEntry ::= SEQUENCE { vRtrDnsLastCh TimeStamp, vRtrDnsRowStatus RowStatus, vRtrDnsAdminState TmnxEnabledDisabled, vRtrDnsPrimaryAddrType InetAddressType, vRtrDnsPrimaryAddr InetAddress, vRtrDnsSecondaryAddrType InetAddressType, vRtrDnsSecondaryAddr InetAddress, vRtrDnsTertiaryAddrType InetAddressType, vRtrDnsTertiaryAddr InetAddress, vRtrDnsIpv4SourceAddr InetAddressIPv4, vRtrDnsIpv6SourceAddr InetAddressIPv6 } vRtrDnsLastCh OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrDnsLastCh indicates the sysUpTime at the time of the most recent management-initiated change to this table row." ::= { vRtrDnsEntry 1 } vRtrDnsRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDnsRowStatus specifies the row status of this conceptual row." ::= { vRtrDnsEntry 2 } vRtrDnsAdminState OBJECT-TYPE SYNTAX TmnxEnabledDisabled MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDnsAdminState specifies the administrative state of DNS in this virtual router instance." DEFVAL { disabled } ::= { vRtrDnsEntry 3 } vRtrDnsPrimaryAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDnsPrimaryAddrType specifies the address type of vRtrDnsPrimaryAddr." DEFVAL { unknown } ::= { vRtrDnsEntry 4 } vRtrDnsPrimaryAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDnsPrimaryAddr specifies the address of the primary DNS server in this virtual router instance." DEFVAL { ''H } ::= { vRtrDnsEntry 5 } vRtrDnsSecondaryAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDnsSecondaryAddrType specifies the address type of vRtrDnsSecondaryAddr." DEFVAL { unknown } ::= { vRtrDnsEntry 6 } vRtrDnsSecondaryAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDnsSecondaryAddr specifies the address of the secondary DNS server in this virtual router instance." DEFVAL { ''H } ::= { vRtrDnsEntry 7 } vRtrDnsTertiaryAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDnsTertiaryAddrType specifies the address type of vRtrDnsTertiaryAddr." DEFVAL { unknown } ::= { vRtrDnsEntry 8 } vRtrDnsTertiaryAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDnsTertiaryAddr specifies the address of the tertiary DNS server in this virtual router instance." DEFVAL { ''H } ::= { vRtrDnsEntry 9 } vRtrDnsIpv4SourceAddr OBJECT-TYPE SYNTAX InetAddressIPv4 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDnsIpv4SourceAddr specifies the source address for communication with an IPv4 DNS server in this virtual router instance. The value of all zeroes specifies that no DNS IPv4 source address is configured." DEFVAL { '00000000'H } ::= { vRtrDnsEntry 10 } vRtrDnsIpv6SourceAddr OBJECT-TYPE SYNTAX InetAddressIPv6 MAX-ACCESS read-create STATUS current DESCRIPTION "The value of vRtrDnsIpv6SourceAddr specifies the source address for communication with an IPv6 DNS server in this virtual router instance. The value of all zeroes specifies that no DNS IPv6 source address is configured." DEFVAL { '00000000000000000000000000000000'H } ::= { vRtrDnsEntry 11 } vRtrInetAllCidrRouteTnlExtTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrInetAllCidrRteTnlExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrInetAllCidrRouteTnlExtTable provides an extension of the inetCidrRouteTable in the IP-FORWARD-MIB, by adding three indexes and displays only tunneled routes." ::= { tmnxVRtrObjs 81 } vRtrInetAllCidrRouteTnlExtEntry OBJECT-TYPE SYNTAX VRtrInetAllCidrRteTnlExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry in the vRtrInetAllCidrRouteTable represents an entry in the IP CIDR route table for the Alcatel-Lucent SROS series." INDEX { inetCidrRouteDestType, inetCidrRouteDest, inetCidrRoutePfxLen, inetCidrRouteProto, vRtrInetAllCidrRouteProtoID, inetCidrRouteNextHopType, inetCidrRouteNextHop, vRtrInetAllCidrRteTnlNxtHopType, vRtrInetAllCidrRteTnlNxtHopOwner, vRtrInetAllCidrRteTnlNxtHopTnlId } ::= { vRtrInetAllCidrRouteTnlExtTable 1 } VRtrInetAllCidrRteTnlExtEntry ::= SEQUENCE { vRtrInetAllCidrRteTnlNxtHopType TmnxInetCidrNextHopType, vRtrInetAllCidrRteTnlNxtHopOwner TmnxInetCidrNextHopOwner, vRtrInetAllCidrRteTnlNxtHopTnlId Unsigned32, vRtrInetAllCidrRteTnlEnabledTime TimeStamp } vRtrInetAllCidrRteTnlNxtHopType OBJECT-TYPE SYNTAX TmnxInetCidrNextHopType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetAllCidrRteTnlNxtHopType indicates the type of next hop for this route." ::= { vRtrInetAllCidrRouteTnlExtEntry 1 } vRtrInetAllCidrRteTnlNxtHopOwner OBJECT-TYPE SYNTAX TmnxInetCidrNextHopOwner MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrInetAllCidrRteTnlNxtHopOwner indicates the owner of next hop for this route." ::= { vRtrInetAllCidrRouteTnlExtEntry 2 } vRtrInetAllCidrRteTnlNxtHopTnlId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Additional table index provided to distinguish between multiple RSVP tunnel-ids to same destination with the same vRtrInetAllCidrRteTnlNxtHopType and vRtrInetAllCidrRteTnlNxtHopOwner." ::= { vRtrInetAllCidrRouteTnlExtEntry 3 } vRtrInetAllCidrRteTnlEnabledTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The vRtrInetAllCidrRteTnlEnabledTime variable indicates the sysUpTime value for this route entry." ::= { vRtrInetAllCidrRouteTnlExtEntry 4 } -- -- Virtual Router BFD session extension table -- vRtrIfBfdSessExtTable OBJECT-TYPE SYNTAX SEQUENCE OF VRtrIfBfdSessExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The vRtrIfBfdSessExtTable table contains per BFD session statistics and operational settings." ::= { tmnxVRtrObjs 92 } vRtrIfBfdSessExtEntry OBJECT-TYPE SYNTAX VRtrIfBfdSessExtEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Each row entry represents a BFD session. Entries are created automatically by the system, or when a static-route is configured to use BFD." INDEX { vRtrIfBfdSessExtLinkType, vRtrIfBfdSessExtRxInfoId, vRtrID, vRtrIfIndex, vRtrIfBfdSessExtLclAddrType, vRtrIfBfdSessExtLclAddr, vRtrIfBfdSessExtRemAddrType, vRtrIfBfdSessExtRemAddr } ::= { vRtrIfBfdSessExtTable 1 } VRtrIfBfdSessExtEntry ::= SEQUENCE { vRtrIfBfdSessExtLinkType INTEGER, vRtrIfBfdSessExtRxInfoId Unsigned32, vRtrIfBfdSessExtLclAddrType InetAddressType, vRtrIfBfdSessExtLclAddr InetAddress, vRtrIfBfdSessExtRemAddrType InetAddressType, vRtrIfBfdSessExtRemAddr InetAddress, vRtrIfBfdSessExtOperState TmnxOperState, vRtrIfBfdSessExtState INTEGER, vRtrIfBfdSessExtOperFlags BITS, vRtrIfBfdSessExtMesgRecv Counter32, vRtrIfBfdSessExtMesgSent Counter32, vRtrIfBfdSessExtLastDownTime TimeStamp, vRtrIfBfdSessExtLastUpTime TimeStamp, vRtrIfBfdSessExtUpCount Counter32, vRtrIfBfdSessExtDownCount Counter32, vRtrIfBfdSessExtLclDisc Unsigned32, vRtrIfBfdSessExtRemDisc Unsigned32, vRtrIfBfdSessExtProtocols BITS, vRtrIfBfdSessExtTxInterval Unsigned32, vRtrIfBfdSessExtRxInterval Unsigned32, vRtrIfBfdSessExtType INTEGER, vRtrIfBfdSessExtVerMismatch Counter32, vRtrIfBfdSessExtTimeSinceLastRx Unsigned32, vRtrIfBfdSessExtTimeSinceLastTx Unsigned32, vRtrIfBfdSessExtRemoteLspNum Unsigned32, vRtrIfBfdSessExtRemoteTunnelNum Unsigned32, vRtrIfBfdSessExtRemoteNodeId TmnxMplsTpNodeID, vRtrIfBfdSessExtRemoteGlobalId TmnxMplsTpGlobalID, vRtrIfBfdSessExtLspPathTunnelId Unsigned32, vRtrIfBfdSessExtLspPathId INTEGER } vRtrIfBfdSessExtLinkType OBJECT-TYPE SYNTAX INTEGER { pointToPoint (0), head (1), tail (2), client (3), ccOnly (4), ccWithCv (5), microBfd (6) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtLinkType indicates the link type of the BFD session." ::= { vRtrIfBfdSessExtEntry 1 } vRtrIfBfdSessExtRxInfoId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtRxInfoId indicates the incoming label id or port id." ::= { vRtrIfBfdSessExtEntry 2 } vRtrIfBfdSessExtLclAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtLclAddrType indicates the address type in vRtrIfBfdSessExtLclAddr." ::= { vRtrIfBfdSessExtEntry 3 } vRtrIfBfdSessExtLclAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtLclAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessExtLclAddrType." ::= { vRtrIfBfdSessExtEntry 4 } vRtrIfBfdSessExtRemAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtRemAddrType indicates the address type in vRtrIfBfdSessExtRemAddr." ::= { vRtrIfBfdSessExtEntry 5 } vRtrIfBfdSessExtRemAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16|20)) MAX-ACCESS not-accessible STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtRemAddr indicates the address of the local endpoint of this BFD session. Its type is specified by vRtrIfBfdSessExtRemAddrType." ::= { vRtrIfBfdSessExtEntry 6 } vRtrIfBfdSessExtOperState OBJECT-TYPE SYNTAX TmnxOperState MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtOperState indicates the operational state of BFD on this interface." ::= { vRtrIfBfdSessExtEntry 7 } vRtrIfBfdSessExtState OBJECT-TYPE SYNTAX INTEGER { adminDown (0), --Session is administratively down down (1), --Session is down init (2), --Session is initializing up (3) --Session is up } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtState indicates the state of the BFD protocol on this interface." ::= { vRtrIfBfdSessExtEntry 8 } vRtrIfBfdSessExtOperFlags OBJECT-TYPE SYNTAX BITS { noProtocols (0), noHeartBeat (1), echoFailed (2), nbrSignalDown (3), fwdPlaneReset (4), pathDown (5), nbrAdminDown (6), adminClear (7), misConnDefect (8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtOperFlags indicates the reasons why a BFD session is not up." ::= { vRtrIfBfdSessExtEntry 9 } vRtrIfBfdSessExtMesgRecv OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtMesgRecv indicates the number of messages received in this session. This object is applicable if vRtrIfBfdSessExtType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned." ::= { vRtrIfBfdSessExtEntry 10 } vRtrIfBfdSessExtMesgSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtMesgSent indicates the number of messages sent in this session. This object is applicable if vRtrIfBfdSessExtType is 'iom(1)' or 'cpm(2)'. Otherwise, zero is returned." ::= { vRtrIfBfdSessExtEntry 11 } vRtrIfBfdSessExtLastDownTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtLastDownTime indicates the system time when this session last went down." ::= { vRtrIfBfdSessExtEntry 12 } vRtrIfBfdSessExtLastUpTime OBJECT-TYPE SYNTAX TimeStamp MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtLastUpTime indicates the system time when this session last came up." ::= { vRtrIfBfdSessExtEntry 13 } vRtrIfBfdSessExtUpCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtUpCount indicates the number of times vRtrIfBfdSessExtOperState changed from 'outOfService' to 'inService'." ::= { vRtrIfBfdSessExtEntry 14 } vRtrIfBfdSessExtDownCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtDownCount indicates the number of times vRtrIfBfdSessExtOperState changed from 'inService' to 'outOfService'." ::= { vRtrIfBfdSessExtEntry 15 } vRtrIfBfdSessExtLclDisc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtLclDisc indicates the unique local discriminator for this session." ::= { vRtrIfBfdSessExtEntry 16 } vRtrIfBfdSessExtRemDisc OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtRemDisc indicates the remote discriminator for this session." ::= { vRtrIfBfdSessExtEntry 17 } vRtrIfBfdSessExtProtocols OBJECT-TYPE SYNTAX BITS { ospfv2 (0), pim (1), isis (2), staticRoute (3), mcRing (4), rsvp (5), bgp (6), vrrp (7), srrp (8), mcep (9), ldp (10), ipsecTunnel(11), ospfv3 (12), mcIpsec (13), mcMobile (14), mplsTp (15), lag (16) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtProtocols indicates which protocols are using this BFD session." ::= { vRtrIfBfdSessExtEntry 18 } vRtrIfBfdSessExtTxInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtTxInterval indicates the negotiated transmit interval. This value is the minimum of the local node's 'vRtrIfBfdExtTransmitInterval' and the remote node's receive interval." ::= { vRtrIfBfdSessExtEntry 19 } vRtrIfBfdSessExtRxInterval OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtRxInterval indicates the negotiated receive interval. This value is the minimum of the local node's 'vRtrIfBfdExtReceiveInterval' and the remote node's transmit interval." ::= { vRtrIfBfdSessExtEntry 20 } vRtrIfBfdSessExtType OBJECT-TYPE SYNTAX INTEGER { iom (1), cpm (2), cpmNp (3), iomHw(4) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtType indicates the termination of the BFD session, as follows: 'iom (1)' - termination on the IOM card main processor, 'cpm (2)' - termination on the CPM card main processor, 'cpmNp (3)' - termination on the CPM card Network Processor." ::= { vRtrIfBfdSessExtEntry 21 } vRtrIfBfdSessExtVerMismatch OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtVerMismatch indicates the number of version mismatch errors for the bfd session." ::= { vRtrIfBfdSessExtEntry 22 } vRtrIfBfdSessExtTimeSinceLastRx OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtTimeSinceLastRx indicates the number of milliseconds elapsed since the most recent message was received on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessExtType equal to 'cpmNp(3)'. Otherwise, zero is returned." ::= { vRtrIfBfdSessExtEntry 23 } vRtrIfBfdSessExtTimeSinceLastTx OBJECT-TYPE SYNTAX Unsigned32 UNITS "milliseconds" MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtTimeSinceLastTx indicates the number of milliseconds elapsed since the most recent message was transmitted on the BFD session. If the session is down, zero is returned. This object is applicable to sessions with vRtrIfBfdSessExtType equal to 'cpmNp(3)'. Otherwise, zero is returned." ::= { vRtrIfBfdSessExtEntry 24 } vRtrIfBfdSessExtRemoteLspNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtRemoteLspNum specifies the MPLS-TP LSP destination path number." REFERENCE "RFC 6370 Section 5.2" ::= { vRtrIfBfdSessExtEntry 25 } vRtrIfBfdSessExtRemoteTunnelNum OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtRemoteTunnelNum indicates the destination tunnel id for the MPLS-TP path." ::= { vRtrIfBfdSessExtEntry 26 } vRtrIfBfdSessExtRemoteNodeId OBJECT-TYPE SYNTAX TmnxMplsTpNodeID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtRemoteNodeId specifies the destination node id of an MPLS-TP LSP." ::= { vRtrIfBfdSessExtEntry 27 } vRtrIfBfdSessExtRemoteGlobalId OBJECT-TYPE SYNTAX TmnxMplsTpGlobalID MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtRemoteGlobalId specifies the global identifier for an MPLS-TP LSP." ::= { vRtrIfBfdSessExtEntry 28 } vRtrIfBfdSessExtLspPathTunnelId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtLspPathTunnelId indicates the source tunnel id for the MPLS-TP path." ::= { vRtrIfBfdSessExtEntry 29 } vRtrIfBfdSessExtLspPathId OBJECT-TYPE SYNTAX INTEGER { notApplicable (0), working (1), protecting (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The value of vRtrIfBfdSessExtLspPathId indicates the source path index for the MPLS-TP LSP path. notApplicable (0) - Indicates vRtrIfBfdSessExtLinkType is neither 'ccOnly' or 'ccWithCv'. working (1) - A working path is the primary path for the LSP. protecting (2) - A protection path is the secondary path for the LSP." ::= { vRtrIfBfdSessExtEntry 30 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- Objects for AutoFilter trap tmnxVRtrNotificationObjects OBJECT IDENTIFIER ::= {tmnxVRtrObjs 21} vRtrAutoFilterDHCPClientAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The Client IP address from the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the client's IP address." ::= { tmnxVRtrNotificationObjects 1 } vRtrAutoFilterDHCPClientLease OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The lease time specified in the PDU causing the trap. Used by tmnxVRtrDHCPAFEntriesExceeded to report the lease time." ::= { tmnxVRtrNotificationObjects 2 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- Objects for DHCP traps vRtrDHCPClientLease OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDHCPClientLease indicates the lease time specified in the PDU causing the trap." ::= { tmnxVRtrNotificationObjects 3} vRtrDhcpLseStateOldCiAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpLseStateOldCiAddr indicates the Client IP address that was formerly assigned to this Least state." ::= { tmnxVRtrNotificationObjects 4} vRtrDhcpLseStateOldChAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpLseStateOldChAddr indicates the Client MAC address that was formerly assigned to this Least state." ::= { tmnxVRtrNotificationObjects 5} vRtrDhcpLseStateNewCiAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpLseStateNewCiAddr indicates the Client IP address specified in the PDU causing the trap." ::= { tmnxVRtrNotificationObjects 6} vRtrDhcpLseStateNewChAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpLseStateNewChAddr indicates the Client MAC address specified in the PDU causing the trap." ::= { tmnxVRtrNotificationObjects 7} vRtrDhcpRestoreLseStateCiAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateCiAddr indicates the IP address specified in the persistency record causing the trap." ::= { tmnxVRtrNotificationObjects 8} vRtrDhcpRestoreLseStateVRtrId OBJECT-TYPE SYNTAX TmnxVRtrID MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateVRtrId indicates the serviceId specified in the persistency record causing the trap." ::= { tmnxVRtrNotificationObjects 9} vRtrDhcpRestoreLseStateIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateIfIndex indicates the Port ID specified in the persistency record causing the trap." ::= { tmnxVRtrNotificationObjects 10} vRtrDhcpRestoreLseStateProblem OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpRestoreLseStateProblem indicates why the persisency record cannot be restored." ::= { tmnxVRtrNotificationObjects 11} vRtrDhcpPacketProblem OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDhcpPacketProblem indicates information on a received DHCP packet is considered suspicious by the system." ::= { tmnxVRtrNotificationObjects 12} vRtrDhcpLseStatePopulateError OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS obsolete DESCRIPTION "The value of the object vRtrDhcpLseStatePopulateError indicates the reason why the system was unable to update the Lease state table with the information contained in the received DHCP ACK message." ::= { tmnxVRtrNotificationObjects 13} vRtrBfdSlotNumber OBJECT-TYPE SYNTAX TmnxSlotNum MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrBfdSlotNumber indicates the IOM slot number where the number of supported BFD sessions has reached the maximum value. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated." ::= { tmnxVRtrNotificationObjects 14} vRtrNumberOfBfdSessionsOnSlot OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrNumberOfBfdSessionsOnSlot indicates the current number of BFD sessions on the slot indicated by vRtrBfdSlotNumber. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated." ::= { tmnxVRtrNotificationObjects 15} vRtrBfdMaxSessionReason OBJECT-TYPE SYNTAX BITS { maxSessionsPerSlot (0), maxTxPacketRate (1), maxRxPacketRate (2), noSupportConfTimers (3) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrBfdMaxSessionReason indicates the reason the maximum numbers of sessions on this IOM slot was reached. This object is reported when the tmnxVRtrBfdMaxSessionOnSlot notification is generated." ::= { tmnxVRtrNotificationObjects 16} vRtrDHCP6ServerNetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6ServerNetAddrType indicates the address type of vRtrDHCP6ServerNetAddr." ::= { tmnxVRtrNotificationObjects 17 } vRtrDHCP6ServerNetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6ServerNetAddr indicates the IP address of the DHCP server." ::= { tmnxVRtrNotificationObjects 18 } vRtrDHCP6ClientNetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6ClientNetAddrType indicates the address type of vRtrDHCP6ClientNetAddr." ::= { tmnxVRtrNotificationObjects 19 } vRtrDHCP6ClientNetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6ClientNetAddr indicates the IP address of the DHCP client." ::= { tmnxVRtrNotificationObjects 20 } vRtrDHCP6AssignedNetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6AssignedNetAddrType indicates the address type of vRtrDHCP6AssignedNetAddr." ::= { tmnxVRtrNotificationObjects 21 } vRtrDHCP6AssignedNetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6AssignedNetAddr indicates the IP address assigned to the DHCP client." ::= { tmnxVRtrNotificationObjects 22 } vRtrDHCP6AssignedPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrDHCP6AssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6AssignedNetAddr." ::= { tmnxVRtrNotificationObjects 23 } vRtrDHCP6OldAssignedNetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6OldAssignedNetAddrType indicates the address type of vRtrDHCP6OldAssignedNetAddr." ::= { tmnxVRtrNotificationObjects 24 } vRtrDHCP6OldAssignedNetAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6OldAssignedNetAddr indicates the IP address formerly assigned to the DHCP client." ::= { tmnxVRtrNotificationObjects 25 } vRtrDHCP6OldAssignedPrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrDHCP6OldAssignedPrefixLen specifies the length of the IP netmask for vRtrDHCP6OldAssignedNetAddr." ::= { tmnxVRtrNotificationObjects 26 } vRtrDHCP6NewClientId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrDHCP6NewClientId indicates the new DHCP6 clients unique identifier (DUID)." ::= { tmnxVRtrNotificationObjects 27 } vRtrDHCP6OldClientId OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..255)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrDHCP6OldClientId indicates the old DHCP6 clients unique identifier (DUID)." ::= { tmnxVRtrNotificationObjects 28 } vRtrDHCP6LeaseOverrideResult OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrDHCP6LeaseOverrideResult indicates whether or not the lease state has been overridden." ::= { tmnxVRtrNotificationObjects 29 } vRtrInetStatRteCpeNotifyAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrInetStatRteCpeNotifyAddrType indicates the address type of vRtrInetStatRteCpeNotifyAddr." ::= { tmnxVRtrNotificationObjects 30 } vRtrInetStatRteCpeNotifyAddr OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrInetStatRteCpeNotifyAddr indicates the IP address of the CPE." ::= { tmnxVRtrNotificationObjects 31 } vRtrInetStaticRouteCpeStatus OBJECT-TYPE SYNTAX INTEGER { reachable (0), unreachable (1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrInetStaticRouteCpeStatus indicates whether or not the CPE associated with a static route is 'reachable' or 'unreachable'." ::= { tmnxVRtrNotificationObjects 32 } vRtrManagedRouteInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrManagedRouteInetAddrType indicates the address type of vRtrManagedRouteInetAddr." ::= { tmnxVRtrNotificationObjects 33 } vRtrManagedRouteInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrManagedRouteInetAddr indicates the IP address of the managed route." ::= { tmnxVRtrNotificationObjects 34 } vRtrManagedRoutePrefixLen OBJECT-TYPE SYNTAX InetAddressPrefixLength MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrManagedRoutePrefixLen indicates the prefix length of the subnet associated with vRtrManagedRouteInetAddr." ::= { tmnxVRtrNotificationObjects 35 } vRtrFailureDescription OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrFailureDescription is a printable character string which contains information about the reason why the notification is sent." ::= { tmnxVRtrNotificationObjects 36 } vRtrMaxRoutesType OBJECT-TYPE SYNTAX INTEGER { ipv4 (0), ipv6 (1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrMaxRoutesType indicates the type of the maximum number of routes indicated by vRtrMaxNumRoutes" ::= { tmnxVRtrNotificationObjects 37 } vRtrSlotOrCpmFlag OBJECT-TYPE SYNTAX INTEGER { slot (0), cpm (1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrSlotOrCpmFlag indicates slot, when we have IOM based sessions and CPM when the sessions are centralised." ::= { tmnxVRtrNotificationObjects 38 } vRtrNotifInetAddrType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrNotifInetAddrType indicates the address type of vRtrNotifInetAddr." ::= { tmnxVRtrNotificationObjects 39 } vRtrNotifInetAddr OBJECT-TYPE SYNTAX InetAddress (SIZE(0|4|16)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of vRtrNotifInetAddr indicates an IP address." ::= { tmnxVRtrNotificationObjects 40 } vRtrIfBfdSessChangedProtocol OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrIfBfdSessChangedProtocol indicates the protocol that changed the state in BFD." ::= { tmnxVRtrNotificationObjects 41 } vRtrIfBfdSessProtoChngdState OBJECT-TYPE SYNTAX INTEGER { added (0), cleared (1) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The value of the object vRtrIfBfdSessProtoChngdState indicates the changed state of vRtrIfBfdSessChangedProtocol in BFD." ::= { tmnxVRtrNotificationObjects 42 } --%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -- -- TIMETRA-VRTR-MIB Notifications -- tmnxVRtrMidRouteTCA NOTIFICATION-TYPE OBJECTS { vRtrStatCurrNumRoutes, vRtrMidRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrMidRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 1 } tmnxVRtrHighRouteTCA NOTIFICATION-TYPE OBJECTS { vRtrStatCurrNumRoutes, vRtrHighRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrHighRouteTCA notification is generated when the number of routes contained in a VPRN exceeds the value specified by vRtrHighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 2 } tmnxVRtrHighRouteCleared NOTIFICATION-TYPE OBJECTS { vRtrStatCurrNumRoutes, vRtrHighRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrHighRouteCleared notification is generated when the number of routes contained in a VPRN has dropped below the vRtrHighRouteThreshold value following the generation of a tmnxVRtrHighRouteTCA notification." ::= { tmnxVRtrNotifications 3 } tmnxVRtrIllegalLabelTCA NOTIFICATION-TYPE OBJECTS { vRtrStatIllegalLabels, vRtrIllegalLabelThreshold } STATUS current DESCRIPTION "The tmnxVRtrIllegalLabelTCA notification is generated when the number of illegal label violations on a VRF has exceeded the value specified by vRtrIllegalLabelThreshold." ::= { tmnxVRtrNotifications 4 } tmnxVRtrMcastMidRouteTCA NOTIFICATION-TYPE OBJECTS { vRtrMulticastRoutes, vRtrMcastMidRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrMcastMidRouteTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMcastMidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 5 } tmnxVRtrMcastMaxRoutesTCA NOTIFICATION-TYPE OBJECTS { vRtrMulticastRoutes, vRtrMaxMcastNumRoutes } STATUS current DESCRIPTION "The tmnxVRtrMcastMaxRoutesTCA notification is generated when the number of multicast routes contained in a VPRN exceeds the value specified by vRtrMaxMcastNumRoutes. No other notifications of this type are generated until after the soak period specified by vRtrRouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 6 } tmnxVRtrMcastMaxRoutesCleared NOTIFICATION-TYPE OBJECTS { vRtrMulticastRoutes, vRtrMaxMcastNumRoutes } STATUS current DESCRIPTION "The tmnxVRtrMcastMaxRoutesCleared notification is generated when the number of multicast routes contained in a VPRN has dropped below the vRtrMaxMcastNumRoutes value following the generation of a tmnxVRtrMcastMaxRoutesTCA notification." ::= { tmnxVRtrNotifications 7 } tmnxVRtrMaxArpEntriesTCA NOTIFICATION-TYPE OBJECTS { vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrMaxARPEntries } STATUS current DESCRIPTION "The tmnxVRtrMaxArpEntriesTCA notification is generated when the number of ARP entries in a VPRN exceeds the maximum supported." ::= { tmnxVRtrNotifications 8 } tmnxVRtrMaxArpEntriesCleared NOTIFICATION-TYPE OBJECTS { vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrMaxARPEntries } STATUS current DESCRIPTION "The tmnxVRtrMaxArpEntriesCleared notification is generated when the number of ARP entries contained in a VPRN has dropped below the maximum value following the generation of a tmnxVRtrMaxArpEntriesTCA notification." ::= { tmnxVRtrNotifications 9 } tmnxVRtrDHCPAFEntriesExceeded NOTIFICATION-TYPE OBJECTS { vRtrIfDHCPOperAutoFilter, vRtrIfIndex, vRtrAutoFilterDHCPClientAddress, vRtrAutoFilterDHCPClientLease } STATUS obsolete DESCRIPTION "The tmnxVRtrDHCPAFEntriesExceeded notification is generated when the number of DHCP 'AutoFilter' entries on a given interface reaches a user configurable upper limit given by vRtrIfDHCPAutoFilter." ::= {tmnxVRtrNotifications 10} tmnxVRtrMaxRoutes NOTIFICATION-TYPE OBJECTS { vRtrStatCurrNumRoutes, vRtrMaxNumRoutes, vRtrMaxRoutesType } STATUS current DESCRIPTION "The tmnxVRtrMaxRoutes notification is generated when the number of routes of type vRtrMaxRoutesType contained in a VPRN reaches the value specified by vRtrMaxNumRoutes." ::= { tmnxVRtrNotifications 11 } tmnxVRtrDHCPLseStsExceeded NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDhcpLseStateNewCiAddr, vRtrDhcpLseStateNewChAddr, vRtrDHCPClientLease } STATUS obsolete DESCRIPTION "The tmnxVRtrDHCPLseStsExceeded notification is generated when the number of DHCP lease states entries on a given interface reaches a user configurable upper limit." ::= {tmnxVRtrNotifications 12} tmnxVRtrDHCPLeaseStateOverride NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDhcpLseStateNewCiAddr, vRtrDhcpLseStateNewChAddr, vRtrDhcpLseStateOldCiAddr, vRtrDhcpLseStateOldChAddr } STATUS obsolete DESCRIPTION "The tmnxVRtrDHCPLeaseStateOverride notification is generated when an existing DHCP lease state is overridden by a new lease state which has the same IP address but a different MAC address." ::= {tmnxVRtrNotifications 13} tmnxVRtrDHCPSuspiciousPcktRcvd NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDhcpPacketProblem } STATUS current DESCRIPTION "The tmnxVRtrDHCPSuspiciousPcktRcvd notification is generated when a DHCP packet is received with suspicious content." ::= {tmnxVRtrNotifications 14} tmnxVRtrDHCPLseStRestoreProblem NOTIFICATION-TYPE OBJECTS { vRtrDhcpRestoreLseStateVRtrId, vRtrDhcpRestoreLseStateIfIndex, vRtrDhcpRestoreLseStateCiAddr, vRtrDhcpRestoreLseStateProblem } STATUS obsolete DESCRIPTION "The tmnxVRtrDHCPLseStRestoreProblem notification is generated when an an error is detected while processing a persistency record." ::= {tmnxVRtrNotifications 15} tmnxVRtrDHCPLseStatePopulateErr NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDhcpLseStatePopulateError } STATUS obsolete DESCRIPTION "The tmnxVRtrDHCPLseStatePopulateErr notification indicates that the system was unable to update the Lease State Table with the information contained in the DHCP ACK message. The DHCP ACK message has been discarded." ::= {tmnxVRtrNotifications 16} tmnxVRtrBfdSessionDown NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessionLclDisc, vRtrIfBfdSessionOperFlags } STATUS obsolete DESCRIPTION "The tmnxVRtrBfdSessionDown notification is generated when a BFD session goes down." ::= {tmnxVRtrNotifications 17} tmnxVRtrBfdMaxSessionOnSlot NOTIFICATION-TYPE OBJECTS { vRtrBfdSlotNumber, vRtrNumberOfBfdSessionsOnSlot, vRtrBfdMaxSessionReason, vRtrSlotOrCpmFlag } STATUS current DESCRIPTION "The tmnxVRtrBfdMaxSessionOnSlot notification is generated when the maximum number of BFD sessions has been reached on the slot indicated in 'vRtrBfdSlotNumber'. When we have IOM based sessions, vRtrSlotOrCpmFlag is set to 'slot' and when the sessions are centralised it is set to 'cpm'." ::= {tmnxVRtrNotifications 18} tmnxVRtrBfdPortTypeNotSupported NOTIFICATION-TYPE OBJECTS { tmnxPortNotifyPortId, tmnxPortType } STATUS current DESCRIPTION "The tmnxVRtrBfdPortTypeNotSupported notification is generated when BFD is not supported on the port specified in 'tmnxPortNotifyPortId'." ::= {tmnxVRtrNotifications 19} tmnxVRtrDHCPIfLseStatesExceeded NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, sapPortId, sapEncapValue, vRtrIfDHCPLeasePopulate, svcDhcpLseStateNewCiAddr, svcDhcpLseStateNewChAddr, svcDhcpClientLease } STATUS current DESCRIPTION "The tmnxVRtrDHCPIfLseStatesExceeded notifications is generated when the number of lease states on an interface exceeds vRtrIfDHCPLeasePopulate." ::= {tmnxVRtrNotifications 20} tmnxVRtrDHCP6RelayLseStExceeded NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrIfDHCP6LeasePopulate, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDHCP6NewClientId, svcDhcpClientLease } STATUS current DESCRIPTION "The tmnxVRtrDHCP6RelayLseStExceeded notifications is generated when the number of lease states populated by dhcp6 relay on an interface exceeds vRtrIfDHCP6LeasePopulate." ::= {tmnxVRtrNotifications 21} tmnxVRtrDHCP6ServerLseStExceeded NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrIfDHCP6ServerMaxLeaseStates, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDHCP6NewClientId, svcDhcpClientLease } STATUS current DESCRIPTION "The tmnxVRtrDHCP6ServerLseStExceeded notifications is generated when the number of lease states populated by dhcp6 server on an interface exceeds vRtrIfDHCP6ServerMaxLeaseStates." ::= {tmnxVRtrNotifications 22} tmnxVRtrDHCP6LseStateOverride NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDHCP6OldAssignedNetAddrType, vRtrDHCP6OldAssignedNetAddr, vRtrDHCP6OldAssignedPrefixLen, vRtrDhcpLseStateOldChAddr, vRtrDHCP6OldClientId, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDhcpLseStateNewChAddr, vRtrDHCP6NewClientId, vRtrDHCP6LeaseOverrideResult } STATUS current DESCRIPTION "The tmnxVRtrDHCP6LseStateOverride notifications is generated when an existing DHCP6 lease state can be overridden by a new lease state. This is allowed if the new lease state has the same IP address but a different client id or mac address. This is not allowed if the new lease state has the same IP address but a different prefix length." ::= {tmnxVRtrNotifications 23} tmnxVRtrDHCP6RelayReplyStripUni NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDHCP6ServerNetAddrType, vRtrDHCP6ServerNetAddr } STATUS current DESCRIPTION "The tmnxVRtrDHCP6RelayReplyStripUni notifications is generated when a unicast option is stripped from a message relayed from a server to a client in a relay reply message." ::= {tmnxVRtrNotifications 24} tmnxVRtrDHCP6IllegalClientAddr NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr } STATUS current DESCRIPTION "The tmnxVRtrDHCP6IllegalClientAddr notifications is generated when an incoming message is dropped because the client's source IP does not match the subnet of the incoming interface." ::= {tmnxVRtrNotifications 25} tmnxVRtrDHCP6AssignedIllegSubnet NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen } STATUS current DESCRIPTION "The tmnxVRtrDHCP6AssignedIllegSubnet notifications is generated when an IP address assigned to the client does not match the subnet of the interface." ::= {tmnxVRtrNotifications 26} tmnxVRtrDHCP6ClientMacUnresolved NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrServiceId, vRtrIfIndex, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr } STATUS current DESCRIPTION "The tmnxVRtrDHCP6ClientMacUnresolved notifications is generated when we receive a relay reply for a client, and the client's MAC address has not been resolved yet." ::= {tmnxVRtrNotifications 27} tmnxVRtrBfdSessionUp NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessionLclDisc } STATUS obsolete DESCRIPTION "The tmnxVRtrBfdSessionUp notification is generated when a BFD session goes up." ::= {tmnxVRtrNotifications 28} tmnxVRtrIPv6MidRouteTCA NOTIFICATION-TYPE OBJECTS { vRtrV6StatCurrNumRoutes, vRtrIPv6MidRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrIPv6MidRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6MidRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 29 } tmnxVRtrIPv6HighRouteTCA NOTIFICATION-TYPE OBJECTS { vRtrV6StatCurrNumRoutes, vRtrIPv6HighRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrIPv6HighRouteTCA notification is generated when the number of IPv6 routes contained in a VPRN exceeds the value specified by vRtrIPv6HighRouteThreshold. No other notifications of this type are generated until after the soak period specified by vRtrIPv6RouteThresholdSoakTime has expired." ::= { tmnxVRtrNotifications 30 } tmnxVRtrIPv6HighRouteCleared NOTIFICATION-TYPE OBJECTS { vRtrV6StatCurrNumRoutes, vRtrIPv6HighRouteThreshold } STATUS current DESCRIPTION "The tmnxVRtrIPv6HighRouteCleared notification is generated when the number of IPv6 routes contained in a VPRN has dropped below the vRtrIPv6HighRouteThreshold value following the generation of a tmnxVRtrIPv6HighRouteTCA notification." ::= { tmnxVRtrNotifications 31 } tmnxVRtrStaticRouteCPEStatus NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrInetStatRteCpeNotifyAddrType, vRtrInetStatRteCpeNotifyAddr, vRtrInetStaticRouteCpeStatus } STATUS current DESCRIPTION "The tmnxVRtrStaticRouteCPEStatus notification is generated when a CPE associated with a static route, as specified by the vRtrInetStatRteCpeNotifyAddr object, becomes reachable or unreachable." ::= { tmnxVRtrNotifications 32 } tmnxVRtrBfdSessionDeleted NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessionLclDisc, vRtrIfBfdSessionOperFlags } STATUS obsolete DESCRIPTION "The tmnxVRtrBfdSessionDeleted notification is generated when a BFD session is deleted." ::= {tmnxVRtrNotifications 33 } tmnxVRtrBfdSessionProtChange NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessionLclDisc, vRtrIfBfdSessionProtocols, vRtrIfBfdSessChangedProtocol, vRtrIfBfdSessProtoChngdState } STATUS obsolete DESCRIPTION "The tmnxVRtrBfdSessionProtChange notification is generated when there is a change in the list of protocols using the BFD session." ::= {tmnxVRtrNotifications 34 } tmnxVRtrManagedRouteAddFailed NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrManagedRouteInetAddrType, vRtrManagedRouteInetAddr, vRtrManagedRoutePrefixLen, vRtrFailureDescription } STATUS current DESCRIPTION "The tmnxVRtrManagedRouteAddFailed notification is generated when a managed route could not be installed." ::= { tmnxVRtrNotifications 35 } tmnxVRtrFibOccupancyThreshold NOTIFICATION-TYPE OBJECTS { vRtrFibStatHighUtilization } STATUS current DESCRIPTION "The tmnxVRtrFibOccupancyThreshold notification is generated when the FIB on an IOM card transitions between experiencing persistent normal and high occupancy." ::= { tmnxVRtrNotifications 36 } tmnxVRtrInetAddressAttachFailed NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrIfIndex, vRtrNotifInetAddrType, vRtrNotifInetAddr, vRtrFailureDescription } STATUS current DESCRIPTION "The tmnxVRtrInetAddressAttachFailed notification is generated when an IP address could not be attached to an interface. The reason is indicated in the failure description. A possible cause is that the maximum number of IP addresses in the system is exceeded. If the IP address is a link-local address, the vRtrIfLinkLocalAddressState of the corresponding entry in the vRtrIfTable does not reach the state 'preferred'. If the IP address was configured by the user, the vRiaInetAddrState of the corresponding entry in the vRtrIpAddrTable does not reach the state 'preferred'. The IP address can also be a subnet router anycast address related to an IP address configured by the user (refer to RFC 4291 IPv6 Addressing Architecture, section 2.6.1 Anycast Addresses)." ::= { tmnxVRtrNotifications 37 } tmnxVRtrSingleSfmOverloadStateCh NOTIFICATION-TYPE OBJECTS { vRtrSingleSfmOverloadState } STATUS current DESCRIPTION "The notification tmnxVRtrSingleSfmOverloadStateCh is sent when IGP single-SFM-overload state of a virtual router instance changes." ::= { tmnxVRtrNotifications 38 } tmnxVRtrGrtExportLimitReached NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrGrtMaxExportRoutes } STATUS current DESCRIPTION "A tmnxVRtrGrtExportLimitReached notification is generated when the configured value of exported routes, vRtrGrtMaxExportRoutes, is reached. Additional routes would not be exported into the GRT from the route table." ::= { tmnxVRtrNotifications 39 } tmnxVRtrGrtRoutesExpLimitDropped NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrGrtMaxExportRoutes } STATUS current DESCRIPTION "A tmnxVRtrGrtRoutesExpLimitDropped notification is generated when the number of exported routes drops below the export limit, vRtrGrtMaxExportRoutes." ::= { tmnxVRtrNotifications 40 } tmnxVRtrIfLdpSyncTimerStart NOTIFICATION-TYPE OBJECTS { vRtrIfIndex, vRtrIfName, vRtrIfLdpSyncTimer } STATUS current DESCRIPTION "A tmnxVRtrIfLdpSyncTimerStart notification is generated when the LDP sync timer, vRtrIfLdpSyncTimer starts for this interface." ::= { tmnxVRtrNotifications 41 } tmnxVRtrIfLdpSyncTimerStop NOTIFICATION-TYPE OBJECTS { vRtrIfIndex, vRtrIfName, vRtrIfLdpSyncTimer } STATUS current DESCRIPTION "A tmnxVRtrIfLdpSyncTimerStart notification is generated when the LDP sync timer, vRtrIfLdpSyncTimer stops for this interface." ::= { tmnxVRtrNotifications 42 } tmnxVRtrBfdNoCpmNpResources NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessionLclDisc } STATUS obsolete DESCRIPTION "The tmnxVRtrBfdNoCpmNpResources notification is generated when a BFD session could not be established because the session requires a cpmNp session termination resource (see vRtrIfBfdExtType), and no cpmNp session termination resources are available." ::= { tmnxVRtrNotifications 43 } tmnxVRtrGrtV6ExportLimitReached NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrGrtMaxIpv6ExportRoutes } STATUS current DESCRIPTION "[CAUSE] A tmnxVRtrGrtV6ExportLimitReached notification is generated when the configured value of exported routes, vRtrGrtMaxIpv6ExportRoutes, is reached. [EFFECT] Additional routes would not be exported into the GRT from the route table. [RECOVERY] The export policy and the value of vRtrGrtMaxIpv6ExportRoutes need to be changed." ::= { tmnxVRtrNotifications 44 } tmnxVRtrGrtV6RoutesExpLimDropped NOTIFICATION-TYPE OBJECTS { vRtrID, vRtrGrtMaxIpv6ExportRoutes } STATUS current DESCRIPTION "[CAUSE] A tmnxVRtrGrtV6RoutesExpLimDropped notification is generated when the number of exported routes drops below the export limit, vRtrGrtMaxIpv6ExportRoutes. [EFFECT] There is no effect of this notification. [RECOVERY] There is no recovery required for this notification." ::= { tmnxVRtrNotifications 45 } tmnxVRtrBfdSessExtDown NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessExtLclDisc, vRtrIfBfdSessExtOperFlags } STATUS current DESCRIPTION "[CAUSE] The tmnxVRtrBfdSessExtDown notification is generated when a BFD session goes down. [EFFECT] The effect of this session going down is that it either takes down any protocol that is riding over top of it or it notifies them that the session has gone down. [RECOVERY] The session will automatically attempt to re-establish on it's own." ::= {tmnxVRtrNotifications 61} tmnxVRtrBfdSessExtUp NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessExtLclDisc } STATUS current DESCRIPTION "[CAUSE] The tmnxVRtrBfdSessExtUp notification is generated when a BFD session goes up. [EFFECT] There is no effect of this notification. [RECOVERY] There is no recovery required for this notification." ::= {tmnxVRtrNotifications 62} tmnxVRtrBfdSessExtDeleted NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessExtLclDisc, vRtrIfBfdSessExtOperFlags } STATUS current DESCRIPTION "[CAUSE] The tmnxVRtrBfdSessExtDeleted notification is generated when a BFD session is deleted. [EFFECT] There is no effect of this notification. [RECOVERY] There is no recovery required for this notification." ::= {tmnxVRtrNotifications 63 } tmnxVRtrBfdSessExtProtChange NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessExtLclDisc, vRtrIfBfdSessExtProtocols, vRtrIfBfdSessChangedProtocol, vRtrIfBfdSessProtoChngdState } STATUS current DESCRIPTION "[CAUSE] The tmnxVRtrBfdSessExtProtChange notification is generated when there is a change in the list of protocols using the BFD session. [EFFECT] There is no effect of this notification. [RECOVERY] There is no recovery required for this notification." ::= {tmnxVRtrNotifications 64 } tmnxVRtrBfdExtNoCpmNpResources NOTIFICATION-TYPE OBJECTS { vRtrIfBfdSessExtLclDisc } STATUS current DESCRIPTION "[CAUSE] The tmnxVRtrBfdExtNoCpmNpResources notification is generated when a BFD session could not be established because the session requires a cpmNp session termination resource (see vRtrIfBfdExtType), and no cpmNp session termination resources are available. [EFFECT] There is no effect of this notification. [RECOVERY] There is no recovery required for this notification." ::= { tmnxVRtrNotifications 65 } -- -- Conformance Information -- tmnxVRtrCompliances OBJECT IDENTIFIER ::= { tmnxVRtrConformance 1 } tmnxVRtrGroups OBJECT IDENTIFIER ::= { tmnxVRtrConformance 2 } tmnxVRtrMobGatewayCompliances OBJECT IDENTIFIER ::= { tmnxVRtrConformance 3 } tmnxVRtrMobGatewayGroups OBJECT IDENTIFIER ::= { tmnxVRtrConformance 4 } -- compliance statements -- tmnxVRtrCompliance MODULE-COMPLIANCE -- ::= { tmnxVRtrCompliances 1 } -- tmnxVRtrR2r1Compliance MODULE-COMPLIANCE -- ::= { tmnxVRtrCompliances 2 } -- tmnxVRtrV3v0Compliance MODULE-COMPLIANCE -- ::= { tmnxVRtrCompliances 3 } tmnxVRtr7450V4v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R4.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalR2r1Group, tmnxVRtrV4v0Group, tmnxVRtrIfV4v0Group, tmnxVRtrIpV4v0Group, -- tmnxVRtrIPv6V4v0Group, -- tmnxVRtrIPv6IpV4v0Group, -- tmnxVRtrIPv6IfV4v0Group, tmnxVRtrNotificationV4v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV4v0Group } ::= { tmnxVRtrCompliances 4 } tmnxVRtr7750V4v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent 7750 SR series systems release R4.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalR2r1Group, tmnxVRtrV4v0Group, tmnxVRtrIfV4v0Group, tmnxVRtrIpV4v0Group, tmnxVRtrIPv6V4v0Group, tmnxVRtrIPv6IpV4v0Group, tmnxVRtrIPv6IfV4v0Group, tmnxVRtrNotificationV4v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV4v0Group } ::= { tmnxVRtrCompliances 5 } tmnxVRtr7450V5v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R5.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalR2r1Group, tmnxVRtrV5v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIpV5v0Group, -- tmnxVRtrIPv6V4v0Group, -- tmnxVRtrIPv6IpV5v0Group, -- tmnxVRtrIPv6IfV4v0Group, tmnxVRtrNotificationV5v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV4v0Group } ::= { tmnxVRtrCompliances 6 } tmnxVRtr7750V5v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent 7750 SR series systems release R5.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalR2r1Group, tmnxVRtrV5v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIpV5v0Group, tmnxVRtrIPv6V4v0Group, tmnxVRtrIPv6IpV5v0Group, tmnxVRtrIPv6IfV4v0Group, tmnxVRtrNotificationV5v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV4v0Group } ::= { tmnxVRtrCompliances 7 } tmnxVRtr7450V6v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R6.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrV6v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIpV5v0Group, -- tmnxVRtrIPv6V4v0Group, -- tmnxVRtrIPv6IpV5v0Group, -- tmnxVRtrIPv6IfV4v0Group, -- tmnxVRtrIfDhcpServerGroup, tmnxVRtrNotificationV6v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, -- tmnxVRtrIfIpcpV6v0Group, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayGroup, tmnxVRtrFibStatsV6v0Group } ::= { tmnxVRtrCompliances 8 } tmnxVRtr77x0V6v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R6.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrV6v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIpV5v0Group, tmnxVRtrIPv6V4v0Group, tmnxVRtrIPv6IpV5v0Group, tmnxVRtrIPv6IfV4v0Group, tmnxVRtrIfDhcpServerGroup, tmnxVRtrNotificationV6v0Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, tmnxVRtrIfIpcpV6v0Group, tmnxVRtrIfCpmProtectGroup, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayGroup, tmnxVRtrFibStatsV6v0Group } ::= { tmnxVRtrCompliances 9 } tmnxVRtr7450V6v1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R6.1." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrV6v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIpV5v0Group, -- tmnxVRtrIPv6V4v0Group, -- tmnxVRtrIPv6IpV5v0Group, -- tmnxVRtrIPv6IfV4v0Group, -- tmnxVRtrIfDhcpServerGroup, tmnxVRtrNotificationV6v1Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, -- tmnxVRtrIfIpcpV6v0Group, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayV6v1Group, tmnxVRtrV6v1Group, tmnxVRtrFibStatsV6v1Group } ::= { tmnxVRtrCompliances 10 } tmnxVRtr77x0V6v1Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R6.1." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrV6v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIpV5v0Group, tmnxVRtrIPv6V4v0Group, tmnxVRtrIPv6IpV5v0Group, tmnxVRtrIPv6IfV4v0Group, tmnxVRtrIfDhcpServerGroup, tmnxVRtrNotificationV6v1Group, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, tmnxVRtrIfIpcpV6v0Group, tmnxVRtrIfCpmProtectGroup, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayV6v1Group, tmnxVRtrV6v1Group, tmnxVRtrFibStatsV6v1Group } ::= { tmnxVRtrCompliances 11 } tmnxVRtr7450V7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R7.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrIfV5v0Group, -- tmnxVRtrIPv6V4v0Group, -- tmnxVRtrIPv6IpV5v0Group, -- tmnxVRtrIPv6IfV4v0Group, tmnxVRtrIPv6MgtIfV7v0Group, -- tmnxVRtrIfDhcpServerGroup, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, -- tmnxVRtrIfIpcpV6v0Group, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayV7v0Group, tmnxVRtrV6v1Group, tmnxVRtrFibStatsV6v1Group, tmnxVRtrInetAllCidrRouteV7v0Group, tmnxVRtrInetStaticRouteV7v0Group, tmnxVRtruRPFV7v0Group, tmnxVRtrMvpnV7v0Group, tmnxVRtrIfV7v0Group, tmnxVRtrV7v0Group, tmnxVRtrIpV7v0Group, tmnxVRtrBfdV7v0Group, tmnxVRtrNotificationV7v0Group } ::= { tmnxVRtrCompliances 12 } tmnxVRtr77x0V7v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R7.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIPv6V4v0Group, tmnxVRtrIPv6IpV5v0Group, tmnxVRtrIPv6IfV4v0Group, tmnxVRtrIfDhcpServerGroup, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, tmnxVRtrIfIpcpV6v0Group, tmnxVRtrIfCpmProtectGroup, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayV7v0Group, tmnxVRtrV6v1Group, tmnxVRtrFibStatsV6v1Group, tmnxVRtrInetAllCidrRouteV7v0Group, tmnxVRtrInetStaticRouteV7v0Group, tmnxVRtruRPFV7v0Group, tmnxVRtrMvpnV7v0Group, tmnxVRtrIfV7v0Group, tmnxVRtrV7v0Group, tmnxVRtrIpV7v0Group, tmnxVRtrBfdV7v0Group, tmnxVRtrNotificationV7v0Group } ::= { tmnxVRtrCompliances 13 } tmnxVRtr7450V8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R8.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrIfV5v0Group, -- tmnxVRtrIPv6V4v0Group, -- tmnxVRtrIPv6IpV5v0Group, -- tmnxVRtrIPv6IfV4v0Group, tmnxVRtrIPv6MgtIfV7v0Group, -- tmnxVRtrIfDhcpServerGroup, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, -- tmnxVRtrIfIpcpV6v0Group, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayV8v0Group, tmnxVRtrV6v1Group, tmnxVRtrInetAllCidrRouteV7v0Group, tmnxVRtrInetStaticRouteV7v0Group, tmnxVRtruRPFV7v0Group, tmnxVRtrMvpnV7v0Group, tmnxVRtrIfV7v0Group, tmnxVRtrV8v0Group, tmnxVRtrBfdV7v0Group, tmnxVRtrNotificationV8v0Group, tmnxVRtrNetDomainGroup, tmnxVRtrBfdV8v0Group, tmnxVRtrIpV7v0Group, tmnxVRtrFibStatsV8v0Group, tmnxVRtrMvpnPmsiV8v0Group, tmnxVRtrIfDHCPRelayV6v1Group } ::= { tmnxVRtrCompliances 14 } tmnxVRtr77x0V8v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R8.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIPv6V4v0Group, tmnxVRtrIPv6IpV5v0Group, tmnxVRtrIPv6IfV4v0Group, tmnxVRtrIfDhcpServerGroup, tmnxVRtrIfSubscrAuthV3v0Group, tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, tmnxVRtrIfIpcpV6v0Group, tmnxVRtrIfCpmProtectGroup, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayV8v0Group, tmnxVRtrV6v1Group, tmnxVRtrInetAllCidrRouteV7v0Group, tmnxVRtrInetStaticRouteV7v0Group, tmnxVRtruRPFV7v0Group, tmnxVRtrMvpnV7v0Group, tmnxVRtrIfV7v0Group, tmnxVRtrV8v0Group, tmnxVRtrBfdV7v0Group, tmnxVRtrNotificationV8v0Group, tmnxVRtrNetDomainGroup, tmnxVRtrTunIntV8v0Group, tmnxVRtrBfdV8v0Group, tmnxVRtrIpV7v0Group, tmnxVRtrFibStatsV8v0Group, tmnxVRtrMvpnPmsiV8v0Group, tmnxVRtrIfDHCPRelayV6v1Group } ::= { tmnxVRtrCompliances 15 } tmnxVRtr7450V9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent 7450 ESS series systems release R9.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrIfV5v0Group, -- tmnxVRtrIPv6V4v0Group, -- tmnxVRtrIPv6IpV5v0Group, -- tmnxVRtrIPv6IfV4v0Group, tmnxVRtrIPv6MgtIfV7v0Group, -- tmnxVRtrIfDhcpServerGroup, tmnxVRtrIfSubscrAuthV3v0Group, -- tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, -- tmnxVRtrIfIpcpV6v0Group, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayV9v0Group, tmnxVRtrV6v1Group, tmnxVRtrInetAllCidrRouteV7v0Group, tmnxVRtrInetStaticRouteV7v0Group, tmnxVRtruRPFV7v0Group, tmnxVRtrMvpnV7v0Group, tmnxVRtrIfV7v0Group, tmnxVRtrV8v0Group, tmnxVRtrV9v0Group, tmnxVRtrBfdV7v0Group, tmnxVRtrNotificationV8v0Group, tmnxVRtrNetDomainGroup, -- tmnxVRtrBfdV8v0Group, tmnxVRtrIpV7v0Group, tmnxVRtrFibStatsV8v0Group, tmnxVRtrMvpnPmsiV8v0Group, tmnxVRtrIfDHCPRelayV6v1Group, tmnxVRtrQPPBV9v0R4Group, tmnxVRtrIfStatsV9v0Group, tmnxVRtrMSPwV9v0Group, tmnxVRtrBfdV9v0Group, tmnxVRtrMvpnSrcRedV9v0R4Group, tmnxVRtrStatV9v0Group } ::= { tmnxVRtrCompliances 16 } tmnxVRtr77x0V9v0Compliance MODULE-COMPLIANCE STATUS obsolete DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R9.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, tmnxVRtrIfV5v0Group, tmnxVRtrIPv6V4v0Group, tmnxVRtrIPv6IpV5v0Group, tmnxVRtrIPv6IfV4v0Group, tmnxVRtrIfDhcpServerGroup, tmnxVRtrIfSubscrAuthV3v0Group, -- tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, tmnxVRtrIfIpcpV6v0Group, tmnxVRtrIfCpmProtectGroup, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayV9v0Group, tmnxVRtrV6v1Group, tmnxVRtrInetAllCidrRouteV7v0Group, tmnxVRtrInetStaticRouteV7v0Group, tmnxVRtruRPFV7v0Group, tmnxVRtrMvpnV7v0Group, tmnxVRtrIfV7v0Group, tmnxVRtrV8v0Group, tmnxVRtrV9v0Group, tmnxVRtrBfdV7v0Group, tmnxVRtrNotificationV8v0Group, tmnxVRtrNetDomainGroup, tmnxVRtrTunIntV8v0Group, -- tmnxVRtrBfdV8v0Group, tmnxVRtrIpV7v0Group, tmnxVRtrFibStatsV8v0Group, tmnxVRtrMvpnPmsiV8v0Group, tmnxVRtrIfDHCPRelayV6v1Group, tmnxVRtrQPPBV9v0R4Group, tmnxVRtrBfdV9v0Group, tmnxVRtrIfDHCP6V9v0Group, tmnxVRtrIfStatsV9v0Group, tmnxVRtrIfIpReasV9v0Group, tmnxVRtrIfV9v0Group, tmnxVRtrMSPwV9v0Group, tmnxVRtrNatRedGroup, tmnxVRtrMvpnSrcRedV9v0R4Group, tmnxVRtrStatV9v0Group } ::= { tmnxVRtrCompliances 17 } tmnxVRtr77x0V10v0Compliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for management of VRTR instances on Alcatel-Lucent SROS series systems release R10.0." MODULE -- this module MANDATORY-GROUPS { tmnxVRtrGlobalV6v0Group, --tmnxVRtrIfV5v0Group, tmnxVRtrIPv6V4v0Group, tmnxVRtrIPv6IpV5v0Group, tmnxVRtrIPv6IfV4v0Group, tmnxVRtrIfDhcpServerGroup, tmnxVRtrIfSubscrAuthV3v0Group, -- tmnxVRtrBfdV6v0Group, tmnxVRtrStaticRteCPEChkV6v0Group, tmnxVRtrIfIpcpV6v0Group, tmnxVRtrIfCpmProtectGroup, tmnxDscpAppV6v0Group, tmnxVRtrIfDHCPRelayV9v0Group, tmnxVRtrV6v1Group, tmnxVRtrInetAllCidrRouteV7v0Group, tmnxVRtrInetStaticRouteV7v0Group, tmnxVRtruRPFV7v0Group, -- tmnxVRtrIfV7v0Group, tmnxVRtrV9v0Group, tmnxVRtrV10v0Group, tmnxVRtrPolicyGroup, tmnxVRtrBfdV7v0Group, tmnxVRtrNotificationV8v0Group, tmnxVRtrNetDomainGroup, tmnxVRtrTunIntV8v0Group, -- tmnxVRtrBfdV8v0Group, tmnxVRtrIpV7v0Group, tmnxVRtrFibStatsV8v0Group, tmnxVRtrMvpnPmsiV8v0Group, tmnxVRtrIfDHCPRelayV6v1Group, tmnxVRtrQPPBV9v0R4Group, tmnxVRtrBfdV9v0Group, tmnxVRtrIfDHCP6V9v0Group, tmnxVRtrIfDHCP6V10v0Group, tmnxVRtrIfStatsV9v0Group, tmnxVRtrIfIpReasV9v0Group, tmnxVRtrMSPwV9v0Group, tmnxVRtrNatRedGroup, tmnxVRtrMvpnSrcRedV9v0R4Group, tmnxVRtrStatV9v0Group, tmnxVRtruRPFV10v0Group, tmnxVRtrIpPoolGroup, tmnxVRtrGlobalV10v0Group, tmnxVRtrQosQGrplV10v0Group, tmnxVRtrStatV10v0Group, tmnxVRtrIPv6MgtIfV7v0Group, tmnxVRtrIfV10v0Group, tmnxVRtrNotificationV10v0Group, tmnxVRtrGrtLocalMgmtV10v0Group } ::= { tmnxVRtrCompliances 18 } -- units of conformance -- tmnxVRtrGlobalGroup OBJECT-GROUP -- ::= { tmnxVRtrGroups 1 } -- tmnxVRtrGroup OBJECT-GROUP -- ::= { tmnxVRtrGroups 2 } -- tmnxVRtrIfGroup OBJECT-GROUP -- ::= { tmnxVRtrGroups 3 } -- tmnxVRtrIpGroup OBJECT-GROUP -- ::= { tmnxVRtrGroups 4 } -- tmnxVRtrNotificationGroup NOTIFICATION-GROUP -- ::= { tmnxVRtrGroups 5 } -- tmnxVRtrR2r1Group OBJECT-GROUP -- ::= { tmnxVRtrGroups 6 } -- tmnxVRtrIpR2r1Group OBJECT-GROUP -- ::= { tmnxVRtrGroups 7 } -- tmnxVRtrNotificationR2r1Group NOTIFICATION-GROUP -- ::= { tmnxVRtrGroups 8 } -- tmnxVRtrIfR2r1Group OBJECT-GROUP -- ::= { tmnxVRtrGroups 9 } tmnxVRtrGlobalR2r1Group OBJECT-GROUP OBJECTS { vRtrNextVRtrID, vRtrConfiguredVRtrs, vRtrActiveVRtrs, vRtrRouteThresholdSoakTime, vRtrMaxARPEntries } STATUS obsolete DESCRIPTION "The group of objects supporting management of general capabilities for transport and virtual routers on version 2.1 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 10 } tmnxVRtrIfSubscrAuthV3v0Group OBJECT-GROUP OBJECTS { vRtrIfDHCPAuthPolicy, vRtrIfDHCPRelayAuthPktsDiscarded, vRtrIfDHCPRelayAuthPktsSuccess } STATUS current DESCRIPTION "The group of objects supporting management of DHCP authentication on version 3.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 11 } -- tmnxVRtrIfV3v0Group OBJECT-GROUP -- ::= { tmnxVRtrGroups 12 } -- tmnxVRtrNotificationV3v0Group NOTIFICATION-GROUP -- ::= { tmnxVRtrGroups 13 } tmnxVRtrV4v0Group OBJECT-GROUP OBJECTS { vRtrRowStatus, vRtrAdminState, vRtrName, vRtrMaxNumRoutes, vRtrBgpStatus, vRtrMplsStatus, vRtrOspfStatus, vRtrRipStatus, vRtrRsvpStatus, vRtrEcmpMaxRoutes, vRtrAS, vRtrNewIfIndex, vRtrLdpStatus, vRtrIsIsStatus, vRtrRouterId, vRtrTriggeredPolicy, vRtrConfederationAS, vRtrRouteDistinguisher, vRtrMidRouteThreshold, vRtrHighRouteThreshold, vRtrIllegalLabelThreshold, vRtrVpnId, vRtrDescription, vRtrGracefulRestart, vRtrGracefulRestartType, vRtrType, vRtrServiceId, vRtrCustId, vRtrIgmpStatus, vRtrMaxNumRoutesLogOnly, vRtrVrfTarget, vRtrVrfExportTarget, vRtrVrfImportTarget, vRtrPimStatus, vRtrMaxMcastNumRoutes, vRtrMaxMcastNumRoutesLogOnly, vRtrMcastMidRouteThreshold, vRtrIgnoreIcmpRedirect, vRtrOspfv3Status, vRtrImportPolicy1, vRtrImportPolicy2, vRtrImportPolicy3, vRtrImportPolicy4, vRtrImportPolicy5, vRtrExportPolicy1, vRtrExportPolicy2, vRtrExportPolicy3, vRtrExportPolicy4, vRtrExportPolicy5, vRtrOperState, vRtrDirectRoutes, vRtrDirectActiveRoutes, vRtrStaticRoutes, vRtrStaticActiveRoutes, vRtrOSPFRoutes, vRtrOSPFActiveRoutes, vRtrBGPRoutes, vRtrBGPActiveRoutes, vRtrISISRoutes, vRtrISISActiveRoutes, vRtrRIPRoutes, vRtrRIPActiveRoutes, vRtrAggregateRoutes, vRtrAggregateActiveRoutes, vRtrStatConfiguredIfs, vRtrStatActiveIfs, vRtrStatIllegalLabels, vRtrStatCurrNumRoutes, vRtrStatBGPVpnRoutes, vRtrStatBGPVpnActiveRoutes, vRtrStatTotalLdpTunnels, vRtrStatTotalSdpTunnels, vRtrStatActiveLdpTunnels, vRtrStatActiveSdpTunnels, vRtrMulticastRoutes, vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrSubMgmtRoutes, vRtrSubMgmtActiveRoutes } STATUS obsolete DESCRIPTION "The group of objects supporting management of transport and virtual routers on version 4.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 14 } tmnxVRtrIfV4v0Group OBJECT-GROUP OBJECTS { vRtrIfTotalNumber, vRtrIfRowStatus, vRtrIfType, vRtrIfName, vRtrIfPortID, vRtrIfChannelID, vRtrIfEncapValue, vRtrIfAdminState, vRtrIfOperState, vRtrIfAlias, vRtrIfPhysicalAddress, vRtrIfArpTimeout, vRtrIfIcmpMaskReply, vRtrIfIcmpRedirects, vRtrIfIcmpNumRedirects, vRtrIfIcmpRedirectsTime, vRtrIfIcmpUnreachables, vRtrIfIcmpNumUnreachables, vRtrIfIcmpUnreachablesTime, vRtrIfIcmpTtlExpired, vRtrIfIcmpNumTtlExpired, vRtrIfIcmpTtlExpiredTime, vRtrIfNtpBroadcast, vRtrIfUnnumbered, vRtrIfMtu, vRtrIfQosPolicyId, vRtrIfIngressFilterId, vRtrIfEgressFilterId, vRtrIfDirectedBroadcast, vRtrIfMplsStatus, vRtrIfUnnumberedIf, vRtrIfCflowd, vRtrIfVPNClass, vRtrIfDescription, vRtrIfProtocol, vRtrIfTosMarkingTrusted, vRtrIfServiceId, vRtrIfArpPopulate, vRtrIfProxyArp, vRtrIfProxyArpLocal, vRtrIfProxyArpPolicy1, vRtrIfProxyArpPolicy2, vRtrIfProxyArpPolicy3, vRtrIfProxyArpPolicy4, vRtrIfProxyArpPolicy5, vRtrIfNameIndex, vRtrIfDHCPRelayInfoAction, vRtrIfDHCPRelayCircuitId, vRtrIfDHCPRelayRemoteId, vRtrIfDHCPRelayServer1, vRtrIfDHCPRelayServer2, vRtrIfDHCPRelayServer3, vRtrIfDHCPRelayServer4, vRtrIfDHCPRelayServer5, vRtrIfDHCPRelayServer6, vRtrIfDHCPRelayServer7, vRtrIfDHCPRelayServer8, vRtrIfDHCPRelayTrusted, vRtrIfDHCPAdminState, vRtrIfDHCPDescription, vRtrIfDHCPRelayRxPkts, vRtrIfDHCPRelayTxPkts, vRtrIfDHCPRelayRxMalformedPkts, vRtrIfDHCPRelayRxUntrustedPkts, vRtrIfDHCPRelayClientPktsDiscarded, vRtrIfDHCPRelayClientPktsRelayed, vRtrIfDHCPRelayServerPktsDiscarded, vRtrIfDHCPRelayServerPktsRelayed, vRtrIfDHCPRelayClientPktsSnooped, vRtrIfDHCPRelayServerPktsSnooped, vRtrIfDHCPLeasePopulate, vRtrIfDHCPOperLeasePopulate, vRtrIfDHCPGiAddressType, vRtrIfDHCPGiAddress, vRtrIfDHCPGiAddressAsSrc, vRtrIfDHCPMatchOption82 } STATUS obsolete DESCRIPTION "The group of objects supporting management of virtual interfaces on version 4.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 15 } tmnxVRtrIpV4v0Group OBJECT-GROUP OBJECTS { vRiaRowStatus, vRiaIpAddress, vRiaNetMask, vRiaBcastAddrFormat, vRiaReasmMaxSize, vRiaIgpInhibit, vRiaInetAddressType, vRiaInetAddress, vRiaInetPrefixLen, vRiaInetAddrState, vRiaInetEui64, vRiaInetOperAddress, vRtrIpCidrRouteLastEnabledTime, vRtrIpCidrRoutePreference, vRtrIpCidrRouteMetric, vRtrStaticRouteDest, vRtrStaticRouteMask, vRtrStaticRouteIndex, vRtrStaticRouteNumber, vRtrStaticRouteRowStatus, vRtrStaticRouteLastEnabledTime, vRtrStaticRouteStatus, vRtrStaticRouteStaticType, vRtrStaticRoutePreference, vRtrStaticRouteMetric, vRtrStaticRouteEgressIfIndex, vRtrStaticRouteNextHop, vRtrStaticRouteNextHopUnnumberedIf, vRtrStaticRouteAdminState, vRtrStaticRouteIgpShortcut, vRtrStaticRouteDisallowIgp, vRtrStaticRouteTag, vRtrStaticRouteIndexDest, vRtrStaticRouteIndexMask, vRtrStaticRouteAvailableIndex, vRtrInetStaticRouteRowStatus, vRtrInetStaticRouteLastEnabledTime, vRtrInetStaticRouteStatus, vRtrInetStaticRouteStaticType, vRtrInetStaticRoutePreference, vRtrInetStaticRouteMetric, vRtrInetStaticRouteEgressIfIndex, vRtrInetStaticRouteNextHopType, vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteAdminState, vRtrInetStaticRouteIgpShortcut, vRtrInetStaticRouteDisallowIgp, vRtrInetStaticRouteTag, vRtrInetStaticRouteEnableBfd, vRtrInetStaticRouteAvailIndex, vRtrSvcIpRangeAddress, vRtrSvcIpRangeMask, vRtrSvcIpRangeRowStatus, vRtrSvcIpRangeExclusive, vRtrIpNetToMediaTimer, vRtrIpNetToMediaOperState, vRtrInstanceAggregationTableLastChanged, vRtrAggregationRowStatus, vRtrAggregationLastChanged, vRtrAggregationSummaryOnly, vRtrAggregationASSet, vRtrAggregationAggregatorAS, vRtrAggregationAggregatorIPAddr, vRtrAggregationOperState, vRtrTunnelMetric, vRtrTunnelAge, vRtrAdvPrefixOnLinkFlag, vRtrAdvPrefixAutonomousFlag, vRtrAdvPrefixPreferredLifetime, vRtrAdvPrefixValidLifetime, vRtrAdvPrefixRowStatus, vRtrInetInstAggrTblLastChged, vRtrInetAggrRowStatus, vRtrInetAggrLastChanged, vRtrInetAggrSummaryOnly, vRtrInetAggrASSet, vRtrInetAggrAggregatorAS, vRtrInetAggrAggregatorIPAddr, vRtrInetAggrOperState, vRtrInetSvcIpRangeRowStatus, vRtrInetSvcIpRangeExclusive, vRtrIpNetToPhysicalTimer, vRtrIpNetToPhysicalOperState, vRtrIpNetToPhysicalIsRouter, vRtrIpNetToPhysicalMTU, vRtrIpNetToPhysicalPort, vRtrIpNetToPhysicalEncap, vRtrInetCidrRouteLastEnabledTime, vRtrInetCidrRoutePreference, vRtrInetCidrRouteMetric } STATUS obsolete DESCRIPTION "The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 16 } tmnxVRtrObsoletedObjectsV4v0Group OBJECT-GROUP OBJECTS { vRtrIfDHCPLseStateChAddr, vRtrIfDHCPLseStateRemainLseTime, vRtrIfDHCPLseStateOption82, vRtrIfDHCPLseStatePersistKey, vRtrDHCPClientLease, vRtrDhcpLseStateOldCiAddr, vRtrDhcpLseStateOldChAddr, vRtrDhcpLseStateNewCiAddr, vRtrDhcpLseStateNewChAddr, vRtrDhcpRestoreLseStateCiAddr, vRtrDhcpRestoreLseStateVRtrId, vRtrDhcpRestoreLseStateIfIndex, vRtrDhcpRestoreLseStateProblem, vRtrDhcpLseStatePopulateError, vRtrIfDHCPRelayInfoOption, vRtrIfDHCPAutoFilter, vRtrIfDHCPSnooping, vRtrIfDHCPAutoFilterId, vRtrIfDHCPOperAutoFilter, vRtrAutoFilterDHCPClientAddress, vRtrAutoFilterDHCPClientLease } STATUS current DESCRIPTION "The group of objects no longer supported in version 4.0 of Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 17 } tmnxVRtrBfdV4v0Group OBJECT-GROUP OBJECTS { vRtrIfBfdAdminState, vRtrIfBfdTransmitInterval, vRtrIfBfdReceiveInterval, vRtrIfBfdMultiplier, vRtrIfBfdSessionOperState, vRtrIfBfdSessionState, vRtrIfBfdSessionOperFlags, vRtrIfBfdSessionMesgRecv, vRtrIfBfdSessionMesgSent, vRtrIfBfdSessionLastDownTime, vRtrIfBfdSessionLastUpTime, vRtrIfBfdSessionUpCount, vRtrIfBfdSessionDownCount, vRtrIfBfdSessionLclDisc, vRtrIfBfdSessionRemDisc, vRtrIfBfdSessionProtocols, vRtrIfBfdSessionTxInterval, vRtrIfBfdSessionRxInterval } STATUS obsolete DESCRIPTION "The group of objects supporting Bi-directional Forwarding Detection on version 4.0 Alcatel 7x50 series systems." ::= { tmnxVRtrGroups 18 } tmnxVRtrNotificationV4v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrMidRouteTCA, tmnxVRtrHighRouteTCA, tmnxVRtrHighRouteCleared, tmnxVRtrIllegalLabelTCA, tmnxVRtrMcastMidRouteTCA, tmnxVRtrMcastMaxRoutesTCA, tmnxVRtrMcastMaxRoutesCleared, tmnxVRtrMaxArpEntriesTCA, tmnxVRtrMaxArpEntriesCleared, tmnxVRtrMaxRoutes, tmnxVRtrDHCPSuspiciousPcktRcvd, tmnxVRtrBfdSessionDown, tmnxVRtrBfdMaxSessionOnSlot, tmnxVRtrBfdPortTypeNotSupported } STATUS obsolete DESCRIPTION "The group of notifications supporting the transport and virtual router capabilities on version 4.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 19 } tmnxVRtrIPv6IfV4v0Group OBJECT-GROUP OBJECTS { vRtrIfIPv6ConfigAllowed, vRtrIfIPv6OperState, vRtrIfIPv6IngressFilterId, vRtrIfIPv6EgressFilterId, vRtrIfIcmpV6Redirects, vRtrIfIcmpV6NumRedirects, vRtrIfIcmpV6RedirectsTime, vRtrIfIcmpV6Unreachables, vRtrIfIcmpV6NumUnreachables, vRtrIfIcmpV6UnreachablesTime, vRtrIfIcmpV6TimeExceeded, vRtrIfIcmpV6NumTimeExceeded, vRtrIfIcmpV6TimeExceededTime, vRtrIfIcmpV6PktTooBig, vRtrIfIcmpV6NumPktTooBig, vRtrIfIcmpV6PktTooBigTime, vRtrIfIcmpV6ParamProblem, vRtrIfIcmpV6NumParamProblem, vRtrIfIcmpV6ParamProblemTime, vRtrIfLinkLocalAddressType, vRtrIfLinkLocalAddressState, vRtrIfLinkLocalAddress, vRtrIfIcmp6InMsgs, vRtrIfIcmp6InErrors, vRtrIfIcmp6InDestUnreachs, vRtrIfIcmp6InAdminProhibs, vRtrIfIcmp6InTimeExcds, vRtrIfIcmp6InParmProblems, vRtrIfIcmp6InPktTooBigs, vRtrIfIcmp6InEchos, vRtrIfIcmp6InEchoReplies, vRtrIfIcmp6InRtrSolicits, vRtrIfIcmp6InRtrAdvertisements, vRtrIfIcmp6InNbrSolicits, vRtrIfIcmp6InNbrAdvertisements, vRtrIfIcmp6InRedirects, vRtrIfIcmp6InGrpMembQueries, vRtrIfIcmp6InGrpMembResponses, vRtrIfIcmp6InGrpMembReductions, vRtrIfIcmp6OutMsgs, vRtrIfIcmp6OutErrors, vRtrIfIcmp6OutDestUnreachs, vRtrIfIcmp6OutAdminProhibs, vRtrIfIcmp6OutTimeExcds, vRtrIfIcmp6OutParmProblems, vRtrIfIcmp6OutPktTooBigs, vRtrIfIcmp6OutEchos, vRtrIfIcmp6OutEchoReplies, vRtrIfIcmp6OutRtrSolicits, vRtrIfIcmp6OutRtrSolicitsTime, vRtrIfIcmp6OutRtrAdvertisements, vRtrIfIcmp6OutRtrAdvTime, vRtrIfIcmp6OutNbrSolicits, vRtrIfIcmp6OutNbrSolicitsTime, vRtrIfIcmp6OutNbrAdvertisements, vRtrIfIcmp6OutNbrAdvTime, vRtrIfIcmp6OutRedirects, vRtrIfIcmp6OutGrpMembQueries, vRtrIfIcmp6OutGrpMembResponses, vRtrIfIcmp6OutGrpMembReductions, vRtrIcmp6InMsgs, vRtrIcmp6InErrors, vRtrIcmp6InDestUnreachs, vRtrIcmp6InAdminProhibs, vRtrIcmp6InTimeExcds, vRtrIcmp6InParmProblems, vRtrIcmp6InPktTooBigs, vRtrIcmp6InEchos, vRtrIcmp6InEchoReplies, vRtrIcmp6InRtrSolicits, vRtrIcmp6InRtrAdvertisements, vRtrIcmp6InNbrSolicits, vRtrIcmp6InNbrAdvertisements, vRtrIcmp6InRedirects, vRtrIcmp6InGrpMembQueries, vRtrIcmp6InGrpMembResponses, vRtrIcmp6InGrpMembReductions, vRtrIcmp6OutMsgs, vRtrIcmp6OutErrors, vRtrIcmp6OutDestUnreachs, vRtrIcmp6OutAdminProhibs, vRtrIcmp6OutTimeExcds, vRtrIcmp6OutParmProblems, vRtrIcmp6OutPktTooBigs, vRtrIcmp6OutEchos, vRtrIcmp6OutEchoReplies, vRtrIcmp6OutRtrSolicits, vRtrIcmp6OutRtrAdvertisements, vRtrIcmp6OutNbrSolicits, vRtrIcmp6OutNbrAdvertisements, vRtrIcmp6OutRedirects, vRtrIcmp6OutGrpMembQueries, vRtrIcmp6OutGrpMembResponses, vRtrIcmp6OutGrpMembReductions } STATUS current DESCRIPTION "The group of objects supporting management of IPv6 virtual interfaces on version 4.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 20 } tmnxVRtrIPv6V4v0Group OBJECT-GROUP OBJECTS { vRtrV6DirectRoutes, vRtrV6DirectActiveRoutes, vRtrV6StaticRoutes, vRtrV6StaticActiveRoutes, vRtrV6OSPFRoutes, vRtrV6OSPFActiveRoutes, vRtrV6BGPRoutes, vRtrV6BGPActiveRoutes, vRtrV6ISISRoutes, vRtrV6ISISActiveRoutes, vRtrV6RIPRoutes, vRtrV6RIPActiveRoutes, vRtrV6AggregateRoutes, vRtrV6AggregateActiveRoutes, vRtrV6StatConfiguredIfs, vRtrV6StatActiveIfs, vRtrV6StatIllegalLabels, vRtrV6StatCurrNumRoutes, vRtrV6StatBGPVpnRoutes, vRtrV6StatBGPVpnActiveRoutes, vRtrV6StatTotalLdpTunnels, vRtrV6StatTotalSdpTunnels, vRtrV6StatActiveLdpTunnels, vRtrV6StatActiveSdpTunnels, vRtrV6MulticastRoutes, vRtrV6StatActiveNbrEntries, vRtrV6StatTotalNbrEntries } STATUS current DESCRIPTION "The group of objects supporting management of IPv6 transport and virtual routers on version 4.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 21 } tmnxVRtrIPv6IpV4v0Group OBJECT-GROUP OBJECTS { vRtrAdvPrefixOnLinkFlag, vRtrAdvPrefixAutonomousFlag, vRtrAdvPrefixPreferredLifetime, vRtrAdvPrefixValidLifetime, vRtrAdvPrefixRowStatus } STATUS obsolete DESCRIPTION "The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 4.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 22 } tmnxVRtrObsoleteNotificationGroup NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrDHCPAFEntriesExceeded, tmnxVRtrDHCPLseStsExceeded, tmnxVRtrDHCPLeaseStateOverride, tmnxVRtrDHCPLseStRestoreProblem, tmnxVRtrDHCPLseStatePopulateErr } STATUS current DESCRIPTION "The group of obsolete notifications for the transport and virtual router capabilities on Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 23 } tmnxVRtrIPv6IpV5v0Group OBJECT-GROUP OBJECTS { vRtrAdvPrefixOnLinkFlag, vRtrAdvPrefixAutonomousFlag, vRtrAdvPrefixPreferredLifetime, vRtrAdvPrefixValidLifetime, vRtrAdvPrefixRowStatus, vRtrIfDHCP6TableLastChanged, vRtrIfDHCP6LastChanged, vRtrIfDHCP6AdminState, vRtrIfDHCP6OperState, vRtrIfDHCP6Description, vRtrIfDHCP6RelayServer1, vRtrIfDHCP6RelayServer2, vRtrIfDHCP6RelayServer3, vRtrIfDHCP6RelayServer4, vRtrIfDHCP6RelayServer5, vRtrIfDHCP6RelayServer6, vRtrIfDHCP6RelayServer7, vRtrIfDHCP6RelayServer8, vRtrIfDHCP6RelayItfIdOption, vRtrIfDHCP6LeasePopulate, vRtrIfDHCP6CurrLeasePopulate, vRtrIfDHCP6SourceAddress, vRtrIfDHCP6EnableNgbrResolution, vRtrIfDHCP6RemoteIdOption, vRtrIfDHCP6PfxdAdminState, vRtrIfDHCP6ServerMaxLeaseStates, vRtrIfDHCP6CurrServerLeaseStates, vRtrIfDHCP6ItfIdString, vRtrIfProxyNDLocal, vRtrIfProxyNDPolicy1, vRtrIfProxyNDPolicy2, vRtrIfProxyNDPolicy3, vRtrIfProxyNDPolicy4, vRtrIfProxyNDPolicy5, vRtrIfDHCP6PfxdRowStatus, vRtrIfDHCP6PfxdLastChanged, vRtrIfDHCP6PfxdDUID, vRtrIfDHCP6PfxdIAID, vRtrIfDHCP6PfxdPrefLifetime, vRtrIfDHCP6PfxdValidLifetime, vRtrIfDHCP6PfxDelegationLstChgd } STATUS current DESCRIPTION "The group of objects supporting management of Ipv6 IP capabilities for transport and virtual routers on version 5.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 24 } tmnxVRtrIfV5v0Group OBJECT-GROUP OBJECTS { vRtrIfTotalNumber, vRtrIfRowStatus, vRtrIfType, vRtrIfName, vRtrIfPortID, vRtrIfEncapValue, vRtrIfAdminState, vRtrIfOperState, vRtrIfAlias, vRtrIfPhysicalAddress, vRtrIfArpTimeout, vRtrIfIcmpMaskReply, vRtrIfIcmpRedirects, vRtrIfIcmpNumRedirects, vRtrIfIcmpRedirectsTime, vRtrIfIcmpUnreachables, vRtrIfIcmpNumUnreachables, vRtrIfIcmpUnreachablesTime, vRtrIfIcmpTtlExpired, vRtrIfIcmpNumTtlExpired, vRtrIfIcmpTtlExpiredTime, vRtrIfNtpBroadcast, vRtrIfUnnumbered, vRtrIfMtu, vRtrIfQosPolicyId, vRtrIfIngressFilterId, vRtrIfEgressFilterId, vRtrIfDirectedBroadcast, vRtrIfMplsStatus, vRtrIfUnnumberedIf, vRtrIfCflowd, vRtrIfVPNClass, vRtrIfDescription, vRtrIfProtocol, vRtrIfTosMarkingTrusted, vRtrIfServiceId, vRtrIfArpPopulate, vRtrIfLastOperStateChange, vRtrIfOperMtu, vRtrIfGlobalIndex, vRtrIfProxyArp, vRtrIfProxyArpLocal, vRtrIfProxyArpPolicy1, vRtrIfProxyArpPolicy2, vRtrIfProxyArpPolicy3, vRtrIfProxyArpPolicy4, vRtrIfProxyArpPolicy5, vRtrIfNameIndex, vRtrIfDHCPRelayInfoAction, vRtrIfDHCPRelayCircuitId, vRtrIfDHCPRelayRemoteId, vRtrIfDHCPRelayServer1, vRtrIfDHCPRelayServer2, vRtrIfDHCPRelayServer3, vRtrIfDHCPRelayServer4, vRtrIfDHCPRelayServer5, vRtrIfDHCPRelayServer6, vRtrIfDHCPRelayServer7, vRtrIfDHCPRelayServer8, vRtrIfDHCPRelayTrusted, vRtrIfDHCPAdminState, vRtrIfDHCPDescription, vRtrIfDHCPRelayRxPkts, vRtrIfDHCPRelayTxPkts, vRtrIfDHCPRelayRxMalformedPkts, vRtrIfDHCPRelayRxUntrustedPkts, vRtrIfDHCPRelayClientPktsDiscarded, vRtrIfDHCPRelayClientPktsRelayed, vRtrIfDHCPRelayServerPktsDiscarded, vRtrIfDHCPRelayServerPktsRelayed, vRtrIfDHCPRelayClientPktsSnooped, vRtrIfDHCPRelayServerPktsSnooped, vRtrIfDHCPRelayClientPktsProxRad, vRtrIfDHCPRelayClientPktsProxLS, vRtrIfDHCPRelayPktsGenRelease, vRtrIfDHCPRelayPktsGenForceRenew, vRtrIfDHCPLeasePopulate, vRtrIfDHCPOperLeasePopulate, vRtrIfDHCPGiAddressType, vRtrIfDHCPGiAddress, vRtrIfDHCPGiAddressAsSrc, vRtrIfDHCPMatchOption82, vRtrIfDHCPRelayRemoteIdStr, vRtrIfDHCPProxyAdminState, vRtrIfDHCPProxyServerAddr, vRtrIfDHCPProxyLeaseTime, vRtrIfDHCPProxyLTRadiusOverride, vRtrIfDHCPVendorIncludeOptions, vRtrIfDHCPVendorOptionString, vRtrIfGlobalIndexvRtrID, vRtrIfGlobalIndexvRtrIfIndex, vRtrIfDelaySeconds, vRtrIfDelayUpTimer, vRtrIfInitDelayEnable } STATUS obsolete DESCRIPTION "The group of objects supporting management of virtual interfaces on version 5.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 25 } tmnxVRtrIpV5v0Group OBJECT-GROUP OBJECTS { vRiaRowStatus, vRiaIpAddress, vRiaNetMask, vRiaBcastAddrFormat, vRiaReasmMaxSize, vRiaIgpInhibit, vRiaInetAddressType, vRiaInetAddress, vRiaInetPrefixLen, vRiaInetAddrState, vRiaInetEui64, vRiaInetOperAddress, vRiaInetGwAddressType, vRiaInetGwAddress, vRiaInetRemoteIpType, vRiaInetRemoteIp, vRtrIpCidrRouteLastEnabledTime, vRtrIpCidrRoutePreference, vRtrIpCidrRouteMetric, vRtrStaticRouteDest, vRtrStaticRouteMask, vRtrStaticRouteIndex, vRtrStaticRouteNumber, vRtrStaticRouteRowStatus, vRtrStaticRouteLastEnabledTime, vRtrStaticRouteStatus, vRtrStaticRouteStaticType, vRtrStaticRoutePreference, vRtrStaticRouteMetric, vRtrStaticRouteEgressIfIndex, vRtrStaticRouteNextHop, vRtrStaticRouteNextHopUnnumberedIf, vRtrStaticRouteAdminState, vRtrStaticRouteIgpShortcut, vRtrStaticRouteDisallowIgp, vRtrStaticRouteTag, vRtrStaticRouteIndexDest, vRtrStaticRouteIndexMask, vRtrStaticRouteAvailableIndex, vRtrInetStaticRouteRowStatus, vRtrInetStaticRouteLastEnabledTime, vRtrInetStaticRouteStatus, vRtrInetStaticRouteStaticType, vRtrInetStaticRoutePreference, vRtrInetStaticRouteMetric, vRtrInetStaticRouteEgressIfIndex, vRtrInetStaticRouteNextHopType, vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteAdminState, vRtrInetStaticRouteIgpShortcut, vRtrInetStaticRouteDisallowIgp, vRtrInetStaticRouteTag, vRtrInetStaticRouteEnableBfd, vRtrInetStaticRouteAvailIndex, vRtrSvcIpRangeAddress, vRtrSvcIpRangeMask, vRtrSvcIpRangeRowStatus, vRtrSvcIpRangeExclusive, vRtrIpNetToMediaTimer, vRtrIpNetToMediaOperState, vRtrInstanceAggregationTableLastChanged, vRtrAggregationRowStatus, vRtrAggregationLastChanged, vRtrAggregationSummaryOnly, vRtrAggregationASSet, vRtrAggregationAggregatorAS, vRtrAggregationAggregatorIPAddr, vRtrAggregationOperState, vRtrTunnelMetric, vRtrTunnelAge, vRtrAdvPrefixOnLinkFlag, vRtrAdvPrefixAutonomousFlag, vRtrAdvPrefixPreferredLifetime, vRtrAdvPrefixValidLifetime, vRtrAdvPrefixRowStatus, vRtrInetInstAggrTblLastChged, vRtrInetAggrRowStatus, vRtrInetAggrLastChanged, vRtrInetAggrSummaryOnly, vRtrInetAggrASSet, vRtrInetAggrAggregatorAS, vRtrInetAggrAggregatorIPAddr, vRtrInetAggrOperState, vRtrInetSvcIpRangeRowStatus, vRtrInetSvcIpRangeExclusive, vRtrIpNetToPhysicalTimer, vRtrIpNetToPhysicalOperState, vRtrIpNetToPhysicalIsRouter, vRtrIpNetToPhysicalMTU, vRtrIpNetToPhysicalPort, vRtrIpNetToPhysicalEncap, vRtrInetCidrRouteLastEnabledTime, vRtrInetCidrRoutePreference, vRtrInetCidrRouteMetric, vRtrInetCidrRouteIfVRtrId } STATUS obsolete DESCRIPTION "The group of objects supporting management of IP capabilities for transport and virtual routers on version 4.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 26 } tmnxVRtrV5v0Group OBJECT-GROUP OBJECTS { vRtrRowStatus, vRtrAdminState, vRtrName, vRtrMaxNumRoutes, vRtrBgpStatus, vRtrMplsStatus, vRtrRipStatus, vRtrRsvpStatus, vRtrEcmpMaxRoutes, vRtrAS, vRtrNewIfIndex, vRtrLdpStatus, vRtrIsIsStatus, vRtrRouterId, vRtrTriggeredPolicy, vRtrConfederationAS, vRtrRouteDistinguisher, vRtrMidRouteThreshold, vRtrHighRouteThreshold, vRtrIllegalLabelThreshold, vRtrVpnId, vRtrDescription, vRtrGracefulRestart, vRtrGracefulRestartType, vRtrType, vRtrServiceId, vRtrCustId, vRtrIgmpStatus, vRtrMaxNumRoutesLogOnly, vRtrVrfTarget, vRtrVrfExportTarget, vRtrVrfImportTarget, vRtrPimStatus, vRtrMaxMcastNumRoutes, vRtrMaxMcastNumRoutesLogOnly, vRtrMcastMidRouteThreshold, vRtrIgnoreIcmpRedirect, vRtrMsdpStatus, vRtrVprnType, vRtrSecondaryVrfId, vRtrMldStatus, vRtrImportPolicy1, vRtrImportPolicy2, vRtrImportPolicy3, vRtrImportPolicy4, vRtrImportPolicy5, vRtrExportPolicy1, vRtrExportPolicy2, vRtrExportPolicy3, vRtrExportPolicy4, vRtrExportPolicy5, vRtrOperState, vRtrDirectRoutes, vRtrDirectActiveRoutes, vRtrStaticRoutes, vRtrStaticActiveRoutes, vRtrOSPFRoutes, vRtrOSPFActiveRoutes, vRtrBGPRoutes, vRtrBGPActiveRoutes, vRtrISISRoutes, vRtrISISActiveRoutes, vRtrRIPRoutes, vRtrRIPActiveRoutes, vRtrAggregateRoutes, vRtrAggregateActiveRoutes, vRtrStatConfiguredIfs, vRtrStatActiveIfs, vRtrStatIllegalLabels, vRtrStatCurrNumRoutes, vRtrStatBGPVpnRoutes, vRtrStatBGPVpnActiveRoutes, vRtrStatTotalLdpTunnels, vRtrStatTotalSdpTunnels, vRtrStatActiveLdpTunnels, vRtrStatActiveSdpTunnels, vRtrMulticastRoutes, vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrSubMgmtRoutes, vRtrSubMgmtActiveRoutes, vRtrStatTotalRsvpTunnels, vRtrStatActiveRsvpTunnels, vRtrV6StatTotalRsvpTunnels, vRtrV6StatActiveRsvpTunnels, vRtrDHCP6DropStatLastCleared, vRtrDHCP6DropStatPktsDropped, vRtrDHCP6MsgStatsLstClrd, vRtrDHCP6MsgStatsRcvd, vRtrDHCP6MsgStatsSent, vRtrDHCP6MsgStatsDropped } STATUS obsolete DESCRIPTION "The group of objects supporting management of transport and virtual routers on version 5.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 27 } tmnxVRtrNotificationV5v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrMidRouteTCA, tmnxVRtrHighRouteTCA, tmnxVRtrHighRouteCleared, tmnxVRtrIllegalLabelTCA, tmnxVRtrMcastMidRouteTCA, tmnxVRtrMcastMaxRoutesTCA, tmnxVRtrMcastMaxRoutesCleared, tmnxVRtrMaxArpEntriesTCA, tmnxVRtrMaxArpEntriesCleared, tmnxVRtrMaxRoutes, tmnxVRtrDHCPSuspiciousPcktRcvd, tmnxVRtrBfdSessionDown, tmnxVRtrBfdMaxSessionOnSlot, tmnxVRtrBfdPortTypeNotSupported, tmnxVRtrDHCPIfLseStatesExceeded, tmnxVRtrDHCP6RelayLseStExceeded, tmnxVRtrDHCP6ServerLseStExceeded, tmnxVRtrDHCP6LseStateOverride, tmnxVRtrDHCP6RelayReplyStripUni, tmnxVRtrDHCP6IllegalClientAddr, tmnxVRtrDHCP6AssignedIllegSubnet, tmnxVRtrDHCP6ClientMacUnresolved, tmnxVRtrBfdSessionUp } STATUS obsolete DESCRIPTION "The group of notifications supporting the transport and virtual router capabilities on version 5.0 Alcatel 7xx0 SR series systems." ::= { tmnxVRtrGroups 28 } tmnxVRtrObsoleteV5v0Group OBJECT-GROUP OBJECTS { vRtrOspfStatus, vRtrOspfv3Status, vRtrIfChannelID } STATUS current DESCRIPTION "The group of objects in TIMETRA-VRTR-MIB which are obsoleted in Alcatel-Lucent SROS 5.0 series systems." ::= { tmnxVRtrGroups 29 } tmnxVRtrNotificationObjV5v0Group OBJECT-GROUP OBJECTS { vRtrID, vRtrIfIndex, vRtrDhcpPacketProblem, vRtrBfdSlotNumber, vRtrNumberOfBfdSessionsOnSlot, vRtrBfdMaxSessionReason, vRtrDHCP6ServerNetAddrType, vRtrDHCP6ServerNetAddr, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDHCP6OldAssignedNetAddrType, vRtrDHCP6OldAssignedNetAddr, vRtrDHCP6OldAssignedPrefixLen, vRtrDHCP6NewClientId, vRtrDHCP6OldClientId, vRtrDHCP6LeaseOverrideResult } STATUS obsolete DESCRIPTION "The group of objects supporting management of notification objects on Alcatel-Lucent SROS 5.0 series systems." ::= { tmnxVRtrGroups 30 } tmnxVRtrIfDhcpServerGroup OBJECT-GROUP OBJECTS { vRtrIfLocalDhcpServerName } STATUS current DESCRIPTION "The group of objects supporting the DHCP server capabilities on version 6.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 31 } tmnxVRtrV6v0Group OBJECT-GROUP OBJECTS { vRtrRowStatus, vRtrAdminState, vRtrName, vRtrMaxNumRoutes, vRtrBgpStatus, vRtrMplsStatus, vRtrRipStatus, vRtrRsvpStatus, vRtrEcmpMaxRoutes, vRtrAS, vRtrNewIfIndex, vRtrLdpStatus, vRtrIsIsStatus, vRtrRouterId, vRtrTriggeredPolicy, vRtrConfederationAS, vRtrRouteDistinguisher, vRtrMidRouteThreshold, vRtrHighRouteThreshold, vRtrIllegalLabelThreshold, vRtrVpnId, vRtrDescription, vRtrGracefulRestart, vRtrGracefulRestartType, vRtrType, vRtrServiceId, vRtrCustId, vRtrIgmpStatus, vRtrMaxNumRoutesLogOnly, vRtrVrfTarget, vRtrVrfExportTarget, vRtrVrfImportTarget, vRtrPimStatus, vRtrMaxMcastNumRoutes, vRtrMaxMcastNumRoutesLogOnly, vRtrMcastMidRouteThreshold, vRtrIgnoreIcmpRedirect, vRtrMsdpStatus, vRtrVprnType, vRtrSecondaryVrfId, vRtrMldStatus, vRtrIPv6MaxNumRoutes, vRtrIPv6MidRouteThreshold, vRtrIPv6HighRouteThreshold, vRtrIPv6MaxNumRoutesLogOnly, vRtrIPv6IgnoreIcmpRedirect, vRtrMcPathMgmtPlcyName, vRtrImportPolicy1, vRtrImportPolicy2, vRtrImportPolicy3, vRtrImportPolicy4, vRtrImportPolicy5, vRtrExportPolicy1, vRtrExportPolicy2, vRtrExportPolicy3, vRtrExportPolicy4, vRtrExportPolicy5, vRtrOperState, vRtrDirectRoutes, vRtrDirectActiveRoutes, vRtrStaticRoutes, vRtrStaticActiveRoutes, vRtrOSPFRoutes, vRtrOSPFActiveRoutes, vRtrBGPRoutes, vRtrBGPActiveRoutes, vRtrISISRoutes, vRtrISISActiveRoutes, vRtrRIPRoutes, vRtrRIPActiveRoutes, vRtrAggregateRoutes, vRtrAggregateActiveRoutes, vRtrStatConfiguredIfs, vRtrStatActiveIfs, vRtrStatIllegalLabels, vRtrStatCurrNumRoutes, vRtrStatBGPVpnRoutes, vRtrStatBGPVpnActiveRoutes, vRtrStatTotalLdpTunnels, vRtrStatTotalSdpTunnels, vRtrStatActiveLdpTunnels, vRtrStatActiveSdpTunnels, vRtrMulticastRoutes, vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrSubMgmtRoutes, vRtrSubMgmtActiveRoutes, vRtrStatTotalRsvpTunnels, vRtrStatActiveRsvpTunnels, vRtrV6StatTotalRsvpTunnels, vRtrV6StatActiveRsvpTunnels, vRtrHostRoutes, vRtrHostActiveRoutes, vRtrV6HostRoutes, vRtrV6HostActiveRoutes, vRtrStatLocalARPEntries, vRtrStatStaticARPEntries, vRtrStatDynamicARPEntries, vRtrStatManagedARPEntries, vRtrStatInternalARPEntries, vRtrDHCP6DropStatLastCleared, vRtrDHCP6DropStatPktsDropped, vRtrDHCP6MsgStatsLstClrd, vRtrDHCP6MsgStatsRcvd, vRtrDHCP6MsgStatsSent, vRtrDHCP6MsgStatsDropped, vRtrInetStaticRouteNHTunnelName, vRtrManagedRoutes, vRtrManagedActiveRoutes } STATUS obsolete DESCRIPTION "The group of objects supporting management of transport and virtual routers on version 6.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 32 } tmnxVRtrStaticRteCPEChkV6v0Group OBJECT-GROUP OBJECTS { vRtrInetStaticRouteCpeAddrType, vRtrInetStaticRouteCpeAddr, vRtrInetStaticRouteCpeInterval, vRtrInetStaticRouteCpeDropCnt, vRtrInetStaticRouteCpeEnableLog, vRtrInetStatRteCpeChkUpTime, vRtrInetStatRteCpeChkInPktCnt, vRtrInetStatRteCpeChkOutPktCnt, vRtrInetStatRteCpeChkUpTrans, vRtrInetStatRteCpeChkDownTrans, vRtrInetStatRteCpeChkTTL } STATUS current DESCRIPTION "The group of objects supporting the Static Route CPE Check capability on version 6.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 33 } tmnxVRtrIfIpcpV6v0Group OBJECT-GROUP OBJECTS { vRtrIfIpcpPeerAddrType, vRtrIfIpcpPeerAddr, vRtrIfIpcpPriDnsAddrType, vRtrIfIpcpPriDnsAddr, vRtrIfIpcpSecDnsAddrType, vRtrIfIpcpSecDnsAddr } STATUS current DESCRIPTION "The group of objects supporting management of IPCP extensions for virtual interfaces on version 6.0 Alcatel 7x50 SR series systems" ::= { tmnxVRtrGroups 34 } tmnxVRtrIfCpmProtectGroup OBJECT-GROUP OBJECTS { vRtrIfCpmProtPolicyId, vRtrIfCpmProtUncfgdProtoDropCnt } STATUS current DESCRIPTION "The group of objects supporting management of CPM Protection for virtual interfaces on Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 35 } tmnxDscpAppV6v0Group OBJECT-GROUP OBJECTS { tmnxDscpAppLastChanged, tmnxDscpAppDscpValue, tmnxDscpFCLastChanged, tmnxDscpFCValue, tmnxDscpAppTableLastChanged, tmnxDscpFCTableLastChanged, tmnxDot1pAppTableLastChanged, tmnxDot1pAppLastChanged, tmnxDot1pAppValue } STATUS current DESCRIPTION "The group of objects supporting management of DSCP marking for self-generated protocol control traffic on Alcatel-Lucent SROS series systems release 6.0." ::= { tmnxVRtrGroups 36 } tmnxVRtrIfDHCPRelayGroup OBJECT-GROUP OBJECTS { vRtrIfDHCPRelayInfoAction, vRtrIfDHCPRelayCircuitId, vRtrIfDHCPRelayRemoteId, vRtrIfDHCPRelayServer1, vRtrIfDHCPRelayServer2, vRtrIfDHCPRelayServer3, vRtrIfDHCPRelayServer4, vRtrIfDHCPRelayServer5, vRtrIfDHCPRelayServer6, vRtrIfDHCPRelayServer7, vRtrIfDHCPRelayServer8, vRtrIfDHCPRelayTrusted, vRtrIfDHCPAdminState, vRtrIfDHCPDescription, vRtrIfDHCPRelayRxPkts, vRtrIfDHCPRelayTxPkts, vRtrIfDHCPRelayRxMalformedPkts, vRtrIfDHCPRelayRxUntrustedPkts, vRtrIfDHCPRelayClientPktsDiscarded, vRtrIfDHCPRelayClientPktsRelayed, vRtrIfDHCPRelayServerPktsDiscarded, vRtrIfDHCPRelayServerPktsRelayed, vRtrIfDHCPRelayClientPktsSnooped, vRtrIfDHCPRelayServerPktsSnooped, vRtrIfDHCPRelayClientPktsProxRad, vRtrIfDHCPRelayClientPktsProxLS, vRtrIfDHCPRelayPktsGenRelease, vRtrIfDHCPRelayPktsGenForceRenew, vRtrIfDHCPLeasePopulate, vRtrIfDHCPOperLeasePopulate, vRtrIfDHCPGiAddressType, vRtrIfDHCPGiAddress, vRtrIfDHCPGiAddressAsSrc, vRtrIfDHCPMatchOption82, vRtrIfDHCPRelayRemoteIdStr, vRtrIfDHCPProxyAdminState, vRtrIfDHCPProxyServerAddr, vRtrIfDHCPProxyLeaseTime, vRtrIfDHCPProxyLTRadiusOverride, vRtrIfDHCPVendorIncludeOptions, vRtrIfDHCPVendorOptionString, vRtrIfDHCPLayer2Header, vRtrIfDHCPAntiSpoofMacAddr, vRtrIfDHCPClientApplications, vRtrIfLdpSyncTimer } STATUS obsolete DESCRIPTION "The group of objects supporting management of DHCP Relay on virtual interfaces on version 6.0 Alcatel-Lucent SROS series systems" ::= { tmnxVRtrGroups 37 } tmnxVRtrGlobalV6v0Group OBJECT-GROUP OBJECTS { vRtrNextVRtrID, vRtrConfiguredVRtrs, vRtrActiveVRtrs, vRtrRouteThresholdSoakTime, vRtrMaxARPEntries, vRtrIPv6RouteThresholdSoakTime } STATUS current DESCRIPTION "The group of objects supporting management of general capabilities for transport and virtual routers on version 6.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 38 } tmnxVRtrNotificationObjV6v0Group OBJECT-GROUP OBJECTS { vRtrID, vRtrIfIndex, vRtrDhcpPacketProblem, vRtrBfdSlotNumber, vRtrNumberOfBfdSessionsOnSlot, vRtrBfdMaxSessionReason, vRtrDHCP6ServerNetAddrType, vRtrDHCP6ServerNetAddr, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDHCP6OldAssignedNetAddrType, vRtrDHCP6OldAssignedNetAddr, vRtrDHCP6OldAssignedPrefixLen, vRtrDHCP6NewClientId, vRtrDHCP6OldClientId, vRtrDHCP6LeaseOverrideResult, vRtrInetStatRteCpeNotifyAddrType, vRtrInetStatRteCpeNotifyAddr, vRtrInetStaticRouteCpeStatus, vRtrManagedRouteInetAddrType, vRtrManagedRouteInetAddr, vRtrManagedRoutePrefixLen, vRtrFailureDescription, vRtrMaxRoutesType, vRtrSlotOrCpmFlag } STATUS obsolete DESCRIPTION "The group of objects supporting management of notification objects on Alcatel-Lucent SROS 6.0 series systems." ::= { tmnxVRtrGroups 39 } tmnxVRtrNotificationV6v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrMidRouteTCA, tmnxVRtrHighRouteTCA, tmnxVRtrHighRouteCleared, tmnxVRtrIllegalLabelTCA, tmnxVRtrMcastMidRouteTCA, tmnxVRtrMcastMaxRoutesTCA, tmnxVRtrMcastMaxRoutesCleared, tmnxVRtrMaxArpEntriesTCA, tmnxVRtrMaxArpEntriesCleared, tmnxVRtrMaxRoutes, tmnxVRtrDHCPSuspiciousPcktRcvd, tmnxVRtrBfdSessionDown, tmnxVRtrBfdMaxSessionOnSlot, tmnxVRtrBfdPortTypeNotSupported, tmnxVRtrDHCPIfLseStatesExceeded, tmnxVRtrDHCP6RelayLseStExceeded, tmnxVRtrDHCP6ServerLseStExceeded, tmnxVRtrDHCP6LseStateOverride, tmnxVRtrDHCP6RelayReplyStripUni, tmnxVRtrDHCP6IllegalClientAddr, tmnxVRtrDHCP6AssignedIllegSubnet, tmnxVRtrDHCP6ClientMacUnresolved, tmnxVRtrBfdSessionUp, tmnxVRtrIPv6MidRouteTCA, tmnxVRtrIPv6HighRouteTCA, tmnxVRtrIPv6HighRouteCleared, tmnxVRtrStaticRouteCPEStatus, tmnxVRtrBfdSessionDeleted, tmnxVRtrBfdSessionProtChange, tmnxVRtrManagedRouteAddFailed } STATUS obsolete DESCRIPTION "The group of notifications supporting the transport and virtual router capabilities on version 6.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 40 } tmnxVRtrBfdV6v0Group OBJECT-GROUP OBJECTS { vRtrIfBfdAdminState, vRtrIfBfdTransmitInterval, vRtrIfBfdReceiveInterval, vRtrIfBfdMultiplier, vRtrIfBfdSessionOperState, vRtrIfBfdSessionState, vRtrIfBfdSessionOperFlags, vRtrIfBfdSessionMesgRecv, vRtrIfBfdSessionMesgSent, vRtrIfBfdSessionLastDownTime, vRtrIfBfdSessionLastUpTime, vRtrIfBfdSessionUpCount, vRtrIfBfdSessionDownCount, vRtrIfBfdSessionLclDisc, vRtrIfBfdSessionRemDisc, vRtrIfBfdSessionProtocols, vRtrIfBfdSessionTxInterval, vRtrIfBfdSessionRxInterval, vRtrIfBfdEchoInterval, vRtrIfBfdSessionType } STATUS obsolete DESCRIPTION "The group of objects supporting Bi-directional Forwarding Detection on version 6.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 41 } tmnxVRtrV6v1Group OBJECT-GROUP OBJECTS { vRtrIgnoreNextHopMetric, vRtrIfStripLabel } STATUS current DESCRIPTION "The group of objects supporting new functionality on version 6.1 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 42 } tmnxVRtrIPv6MgtIfV7v0Group OBJECT-GROUP OBJECTS { vRtrIfIPv6ConfigAllowed } STATUS current DESCRIPTION "The group of objects supporting management of IPv6 on the the management interface on version 7.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 43 } tmnxVRtrFibStatsV6v0Group OBJECT-GROUP OBJECTS { vRtrFibStatStaticRoutes, vRtrFibStatDirectRoutes, vRtrFibStatHostRoutes, vRtrFibStatBGPRoutes, vRtrFibStatBGPVpnRoutes, vRtrFibStatOSPFRoutes, vRtrFibStatISISRoutes, vRtrFibStatRIPRoutes, vRtrFibStatAggrRoutes, vRtrFibStatSubMgmtRoutes, vRtrFibStatManagedRoutes, vRtrFibStatV6StaticRoutes, vRtrFibStatV6DirectRoutes, vRtrFibStatV6HostRoutes, vRtrFibStatV6BGPRoutes, vRtrFibStatV6BGPVpnRoutes, vRtrFibStatV6OSPFRoutes, vRtrFibStatV6ISISRoutes, vRtrFibStatV6RIPRoutes, vRtrFibStatV6AggrRoutes, vRtrFibStatV6SubMgmtRoutes, vRtrFibStatV6ManagedRoutes, vRtrFibStatOverflows, vRtrFibStatNextHopIPActive, vRtrFibStatNextHopIPAvailable, vRtrFibStatNextHopTunnelActive, vRtrFibStatNextHopTunnelAvailable } STATUS obsolete DESCRIPTION "The group of objects supporting FIB summary counts on version 6.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 44 } tmnxVRtrInetAllCidrRouteV7v0Group OBJECT-GROUP OBJECTS { vRtrInetAllCidrRouteIfIndex, vRtrInetAllCidrRouteType, vRtrInetAllCidrRouteAge, vRtrInetAllCidrRouteNextHopAS, vRtrInetAllCidrRouteMetric1, vRtrInetAllCidrRouteMetric2, vRtrInetAllCidrRouteMetric3, vRtrInetAllCidrRouteMetric4, vRtrInetAllCidrRouteMetric5, vRtrInetAllCidrRoutePreference, vRtrInetAllCidrRouteMetric, vRtrInetAllCidrRouteIfVRtrId, vRtrInetAllCidrRouteIsActive } STATUS current DESCRIPTION "The group of objects supporting FIB summary counts on version 7.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 45 } tmnxVRtrInetStaticRouteV7v0Group OBJECT-GROUP OBJECTS { vRtrInetStaticRoutePrefixListName, vRtrInetStaticRoutePrefixListFlag } STATUS current DESCRIPTION "The group of objects supporting the Conditional Route Policy capability on version 7.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 46 } tmnxVRtrFibStatsV6v1Group OBJECT-GROUP OBJECTS { vRtrFibStatStaticRoutes, vRtrFibStatDirectRoutes, vRtrFibStatHostRoutes, vRtrFibStatBGPRoutes, vRtrFibStatBGPVpnRoutes, vRtrFibStatOSPFRoutes, vRtrFibStatISISRoutes, vRtrFibStatRIPRoutes, vRtrFibStatAggrRoutes, vRtrFibStatSubMgmtRoutes, vRtrFibStatManagedRoutes, vRtrFibStatV6StaticRoutes, vRtrFibStatV6DirectRoutes, vRtrFibStatV6HostRoutes, vRtrFibStatV6BGPRoutes, vRtrFibStatV6BGPVpnRoutes, vRtrFibStatV6OSPFRoutes, vRtrFibStatV6ISISRoutes, vRtrFibStatV6RIPRoutes, vRtrFibStatV6AggrRoutes, vRtrFibStatV6SubMgmtRoutes, vRtrFibStatV6ManagedRoutes, vRtrFibStatOverflows, vRtrFibStatAlarmCount, vRtrFibStatLastAlarmTime, vRtrFibStatHighUtilization, vRtrFibStatNextHopIPActive, vRtrFibStatNextHopIPAvailable, vRtrFibStatNextHopTunnelActive, vRtrFibStatNextHopTunnelAvailable } STATUS obsolete DESCRIPTION "The group of objects supporting FIB summary counts on version 6.1 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 47 } tmnxVRtrNotificationV6v1Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrMidRouteTCA, tmnxVRtrHighRouteTCA, tmnxVRtrHighRouteCleared, tmnxVRtrIllegalLabelTCA, tmnxVRtrMcastMidRouteTCA, tmnxVRtrMcastMaxRoutesTCA, tmnxVRtrMcastMaxRoutesCleared, tmnxVRtrMaxArpEntriesTCA, tmnxVRtrMaxArpEntriesCleared, tmnxVRtrMaxRoutes, tmnxVRtrDHCPSuspiciousPcktRcvd, tmnxVRtrBfdSessionDown, tmnxVRtrBfdMaxSessionOnSlot, tmnxVRtrBfdPortTypeNotSupported, tmnxVRtrDHCPIfLseStatesExceeded, tmnxVRtrDHCP6RelayLseStExceeded, tmnxVRtrDHCP6ServerLseStExceeded, tmnxVRtrDHCP6LseStateOverride, tmnxVRtrDHCP6RelayReplyStripUni, tmnxVRtrDHCP6IllegalClientAddr, tmnxVRtrDHCP6AssignedIllegSubnet, tmnxVRtrDHCP6ClientMacUnresolved, tmnxVRtrBfdSessionUp, tmnxVRtrIPv6MidRouteTCA, tmnxVRtrIPv6HighRouteTCA, tmnxVRtrIPv6HighRouteCleared, tmnxVRtrStaticRouteCPEStatus, tmnxVRtrBfdSessionDeleted, tmnxVRtrBfdSessionProtChange, tmnxVRtrManagedRouteAddFailed, tmnxVRtrFibOccupancyThreshold } STATUS obsolete DESCRIPTION "The group of notifications supporting the transport and virtual router capabilities on version 6.1 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 48 } tmnxVRtruRPFV7v0Group OBJECT-GROUP OBJECTS { vRtrIfuRPFCheckState, vRtrIfuRPFCheckMode, vRtrIfuRPFCheckFailPkts, vRtrIfuRPFCheckFailPktsLow32, vRtrIfuRPFCheckFailPktsHigh32, vRtrIfuRPFCheckFailBytes, vRtrIfuRPFCheckFailBytesLow32, vRtrIfuRPFCheckFailBytesHigh32 } STATUS current DESCRIPTION "The group of objects supporting unicast RPF feature on version 7.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 49 } tmnxVRtrMvpnV7v0Group OBJECT-GROUP OBJECTS { vRtrMvpnVrfTarget, vRtrMvpnVrfExportTarget, vRtrMvpnVrfImportTarget, vRtrMvpnVrfTargetUnicast, vRtrMvpnVrfExportTargetUnicast, vRtrMvpnVrfImportTargetUnicast, vRtrMvpnImportPolicy1, vRtrMvpnImportPolicy2, vRtrMvpnImportPolicy3, vRtrMvpnImportPolicy4, vRtrMvpnImportPolicy5, vRtrMvpnExportPolicy1, vRtrMvpnExportPolicy2, vRtrMvpnExportPolicy3, vRtrMvpnExportPolicy4, vRtrMvpnExportPolicy5, vRtrMvpnImportPolicyUnicast, vRtrMvpnExportPolicyUnicast, vRtrMvpnCMcastImportRT } STATUS obsolete DESCRIPTION "The group of objects supporting Multicast VPN (MVPN) on version 7.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 50 } tmnxVRtrIfV7v0Group OBJECT-GROUP OBJECTS { vRtrIfQosQGrp } STATUS obsolete DESCRIPTION "The group of additional router interface objects supported on version 7.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 51 } tmnxVRtrIpV7v0Group OBJECT-GROUP OBJECTS { vRiaRowStatus, vRiaIpAddress, vRiaNetMask, vRiaBcastAddrFormat, vRiaReasmMaxSize, vRiaIgpInhibit, vRiaInetAddressType, vRiaInetAddress, vRiaInetPrefixLen, vRiaInetAddrState, vRiaInetEui64, vRiaInetOperAddress, vRiaInetGwAddressType, vRiaInetGwAddress, vRiaInetRemoteIpType, vRiaInetRemoteIp, vRtrIpCidrRouteLastEnabledTime, vRtrIpCidrRoutePreference, vRtrIpCidrRouteMetric, vRtrStaticRouteDest, vRtrStaticRouteMask, vRtrStaticRouteIndex, vRtrStaticRouteNumber, vRtrStaticRouteRowStatus, vRtrStaticRouteLastEnabledTime, vRtrStaticRouteStatus, vRtrStaticRouteStaticType, vRtrStaticRoutePreference, vRtrStaticRouteMetric, vRtrStaticRouteEgressIfIndex, vRtrStaticRouteNextHop, vRtrStaticRouteNextHopUnnumberedIf, vRtrStaticRouteAdminState, vRtrStaticRouteIgpShortcut, vRtrStaticRouteDisallowIgp, vRtrStaticRouteTag, vRtrStaticRouteIndexDest, vRtrStaticRouteIndexMask, vRtrStaticRouteAvailableIndex, vRtrInetStaticRouteRowStatus, vRtrInetStaticRouteLastEnabledTime, vRtrInetStaticRouteStatus, vRtrInetStaticRouteStaticType, vRtrInetStaticRoutePreference, vRtrInetStaticRouteMetric, vRtrInetStaticRouteEgressIfIndex, vRtrInetStaticRouteNextHopType, vRtrInetStaticRouteNextHop, vRtrInetStaticRouteNextHopIf, vRtrInetStaticRouteAdminState, vRtrInetStaticRouteIgpShortcut, vRtrInetStaticRouteDisallowIgp, vRtrInetStaticRouteTag, vRtrInetStaticRouteEnableBfd, vRtrInetStaticRouteAvailIndex, vRtrSvcIpRangeAddress, vRtrSvcIpRangeMask, vRtrSvcIpRangeRowStatus, vRtrSvcIpRangeExclusive, vRtrIpNetToMediaTimer, vRtrIpNetToMediaOperState, vRtrTunnelMetric, vRtrTunnelAge, vRtrAdvPrefixOnLinkFlag, vRtrAdvPrefixAutonomousFlag, vRtrAdvPrefixPreferredLifetime, vRtrAdvPrefixValidLifetime, vRtrAdvPrefixRowStatus, vRtrInetInstAggrTblLastChged, vRtrInetAggrRowStatus, vRtrInetAggrLastChanged, vRtrInetAggrSummaryOnly, vRtrInetAggrASSet, vRtrInetAggrAggregatorIPAddr, vRtrInetAggrOperState, vRtrInetSvcIpRangeRowStatus, vRtrInetSvcIpRangeExclusive, vRtrIpNetToPhysicalTimer, vRtrIpNetToPhysicalOperState, vRtrIpNetToPhysicalIsRouter, vRtrIpNetToPhysicalMTU, vRtrIpNetToPhysicalPort, vRtrIpNetToPhysicalEncap, vRtrInetCidrRouteLastEnabledTime, vRtrInetCidrRoutePreference, vRtrInetCidrRouteMetric, vRtrInetCidrRouteIfVRtrId, vRtrInetAggrAggregatorAS4Byte, vRtrInetCidrRouteTunnEndpntInfo, vRtrInetCidrProtocolInstance, vRtrInetStaticRouteLdpSync } STATUS current DESCRIPTION "The group of objects supporting management of IP capabilities for transport and virtual routers on version 7.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 52 } tmnxVRtrV7v0Group OBJECT-GROUP OBJECTS { vRtrRowStatus, vRtrAdminState, vRtrName, vRtrMaxNumRoutes, vRtrBgpStatus, vRtrMplsStatus, vRtrRipStatus, vRtrRsvpStatus, vRtrEcmpMaxRoutes, vRtrNewIfIndex, vRtrLdpStatus, vRtrIsIsStatus, vRtrRouterId, vRtrTriggeredPolicy, vRtrRouteDistinguisher, vRtrMidRouteThreshold, vRtrHighRouteThreshold, vRtrIllegalLabelThreshold, vRtrVpnId, vRtrDescription, vRtrGracefulRestart, vRtrGracefulRestartType, vRtrType, vRtrServiceId, vRtrCustId, vRtrIgmpStatus, vRtrMaxNumRoutesLogOnly, vRtrVrfTarget, vRtrVrfExportTarget, vRtrVrfImportTarget, vRtrPimStatus, vRtrMaxMcastNumRoutes, vRtrMaxMcastNumRoutesLogOnly, vRtrMcastMidRouteThreshold, vRtrIgnoreIcmpRedirect, vRtrMsdpStatus, vRtrVprnType, vRtrSecondaryVrfId, vRtrMldStatus, vRtrIPv6MaxNumRoutes, vRtrIPv6MidRouteThreshold, vRtrIPv6HighRouteThreshold, vRtrIPv6MaxNumRoutesLogOnly, vRtrIPv6IgnoreIcmpRedirect, vRtrMcPathMgmtPlcyName, vRtrImportPolicy1, vRtrImportPolicy2, vRtrImportPolicy3, vRtrImportPolicy4, vRtrImportPolicy5, vRtrExportPolicy1, vRtrExportPolicy2, vRtrExportPolicy3, vRtrExportPolicy4, vRtrExportPolicy5, vRtrOperState, vRtrDirectRoutes, vRtrDirectActiveRoutes, vRtrStaticRoutes, vRtrStaticActiveRoutes, vRtrOSPFRoutes, vRtrOSPFActiveRoutes, vRtrBGPRoutes, vRtrBGPActiveRoutes, vRtrISISRoutes, vRtrISISActiveRoutes, vRtrRIPRoutes, vRtrRIPActiveRoutes, vRtrAggregateRoutes, vRtrAggregateActiveRoutes, vRtrStatConfiguredIfs, vRtrStatActiveIfs, vRtrStatIllegalLabels, vRtrStatCurrNumRoutes, vRtrStatBGPVpnRoutes, vRtrStatBGPVpnActiveRoutes, vRtrStatTotalLdpTunnels, vRtrStatTotalSdpTunnels, vRtrStatActiveLdpTunnels, vRtrStatActiveSdpTunnels, vRtrMulticastRoutes, vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrSubMgmtRoutes, vRtrSubMgmtActiveRoutes, vRtrStatTotalRsvpTunnels, vRtrStatActiveRsvpTunnels, vRtrV6StatTotalRsvpTunnels, vRtrV6StatActiveRsvpTunnels, vRtrHostRoutes, vRtrHostActiveRoutes, vRtrV6HostRoutes, vRtrV6HostActiveRoutes, vRtrStatLocalARPEntries, vRtrStatStaticARPEntries, vRtrStatDynamicARPEntries, vRtrStatManagedARPEntries, vRtrStatInternalARPEntries, vRtrDHCP6DropStatLastCleared, vRtrDHCP6DropStatPktsDropped, vRtrDHCP6MsgStatsLstClrd, vRtrDHCP6MsgStatsRcvd, vRtrDHCP6MsgStatsSent, vRtrDHCP6MsgStatsDropped, vRtrInetStaticRouteNHTunnelName, vRtrManagedRoutes, vRtrManagedActiveRoutes, vRtrAS4Byte, vRtrConfederationAS4Byte, vRiaInetAddrPreferred, vRtrIfAdmLnkLclAddrPreferred, vRtrIfAdminLinkLocalAddr, vRtrIfAdminLinkLocalAddrType } STATUS obsolete DESCRIPTION "The group of objects supporting management of transport and virtual routers on version 7.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 53 } tmnxVRtrObsoleteV7v0Group OBJECT-GROUP OBJECTS { vRtrAS, vRtrConfederationAS, vRtrInetAggrAggregatorAS, vRtrInstanceAggregationTableLastChanged, vRtrAggregationRowStatus, vRtrAggregationLastChanged, vRtrAggregationSummaryOnly, vRtrAggregationASSet, vRtrAggregationAggregatorAS, vRtrAggregationAggregatorIPAddr, vRtrAggregationOperState } STATUS current DESCRIPTION "The group of objects in TIMETRA-VRTR-MIB which are obsoleted in Alcatel-Lucent SROS 7.0 series systems." ::= { tmnxVRtrGroups 54 } tmnxVRtrIfDHCPRelayV7v0Group OBJECT-GROUP OBJECTS { vRtrIfDHCPRelayInfoAction, vRtrIfDHCPRelayCircuitId, vRtrIfDHCPRelayRemoteId, vRtrIfDHCPRelayServer1, vRtrIfDHCPRelayServer2, vRtrIfDHCPRelayServer3, vRtrIfDHCPRelayServer4, vRtrIfDHCPRelayServer5, vRtrIfDHCPRelayServer6, vRtrIfDHCPRelayServer7, vRtrIfDHCPRelayServer8, vRtrIfDHCPRelayTrusted, vRtrIfDHCPAdminState, vRtrIfDHCPDescription, vRtrIfDHCPRelayRxPkts, vRtrIfDHCPRelayTxPkts, vRtrIfDHCPRelayRxMalformedPkts, vRtrIfDHCPRelayRxUntrustedPkts, vRtrIfDHCPRelayClientPktsDiscarded, vRtrIfDHCPRelayClientPktsRelayed, vRtrIfDHCPRelayServerPktsDiscarded, vRtrIfDHCPRelayServerPktsRelayed, vRtrIfDHCPRelayClientPktsSnooped, vRtrIfDHCPRelayServerPktsSnooped, vRtrIfDHCPRelayClientPktsProxRad, vRtrIfDHCPRelayClientPktsProxLS, vRtrIfDHCPRelayPktsGenRelease, vRtrIfDHCPRelayPktsGenForceRenew, vRtrIfDHCPLeasePopulate, vRtrIfDHCPOperLeasePopulate, vRtrIfDHCPGiAddressType, vRtrIfDHCPGiAddress, vRtrIfDHCPGiAddressAsSrc, vRtrIfDHCPMatchOption82, vRtrIfDHCPRelayRemoteIdStr, vRtrIfDHCPProxyAdminState, vRtrIfDHCPProxyServerAddr, vRtrIfDHCPProxyLeaseTime, vRtrIfDHCPProxyLTRadiusOverride, vRtrIfDHCPVendorIncludeOptions, vRtrIfDHCPVendorOptionString, vRtrIfDHCPLayer2Header, vRtrIfDHCPAntiSpoofMacAddr, vRtrIfDHCPClientApplications, vRtrIfLdpSyncTimer, vRtrIfDHCPUseArpForReply, vRtrIfDHCPRelayPlainBootp, vRtrIfDHCPUserDb } STATUS obsolete DESCRIPTION "The group of objects supporting management of DHCP Relay on virtual interfaces on version 7.0 Alcatel-Lucent SROS series systems" ::= { tmnxVRtrGroups 55 } tmnxVRtrBfdV7v0Group OBJECT-GROUP OBJECTS { vRtrIfBfdSessionVerMismatch } STATUS current DESCRIPTION "The group of objects supporting Bi-directional Forwarding Detection add in version 7.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 56 } tmnxVRtrIfDHCPRelayV6v1Group OBJECT-GROUP OBJECTS { vRtrIfDHCPRelayInfoAction, vRtrIfDHCPRelayCircuitId, vRtrIfDHCPRelayRemoteId, vRtrIfDHCPRelayServer1, vRtrIfDHCPRelayServer2, vRtrIfDHCPRelayServer3, vRtrIfDHCPRelayServer4, vRtrIfDHCPRelayServer5, vRtrIfDHCPRelayServer6, vRtrIfDHCPRelayServer7, vRtrIfDHCPRelayServer8, vRtrIfDHCPRelayTrusted, vRtrIfDHCPAdminState, vRtrIfDHCPDescription, vRtrIfDHCPRelayRxPkts, vRtrIfDHCPRelayTxPkts, vRtrIfDHCPRelayRxMalformedPkts, vRtrIfDHCPRelayRxUntrustedPkts, vRtrIfDHCPRelayClientPktsDiscarded, vRtrIfDHCPRelayClientPktsRelayed, vRtrIfDHCPRelayServerPktsDiscarded, vRtrIfDHCPRelayServerPktsRelayed, vRtrIfDHCPRelayClientPktsSnooped, vRtrIfDHCPRelayServerPktsSnooped, vRtrIfDHCPRelayClientPktsProxRad, vRtrIfDHCPRelayClientPktsProxLS, vRtrIfDHCPRelayPktsGenRelease, vRtrIfDHCPRelayPktsGenForceRenew, vRtrIfDHCPLeasePopulate, vRtrIfDHCPOperLeasePopulate, vRtrIfDHCPGiAddressType, vRtrIfDHCPGiAddress, vRtrIfDHCPGiAddressAsSrc, vRtrIfDHCPMatchOption82, vRtrIfDHCPRelayRemoteIdStr, vRtrIfDHCPProxyAdminState, vRtrIfDHCPProxyServerAddr, vRtrIfDHCPProxyLeaseTime, vRtrIfDHCPProxyLTRadiusOverride, vRtrIfDHCPVendorIncludeOptions, vRtrIfDHCPVendorOptionString, vRtrIfDHCPLayer2Header, vRtrIfDHCPAntiSpoofMacAddr, vRtrIfDHCPClientApplications, vRtrIfDHCPUseArpForReply, vRtrIfLdpSyncTimer } STATUS current DESCRIPTION "The group of objects supporting management of DHCP Relay on virtual interfaces on version 6.1 Alcatel-Lucent SROS series systems" ::= { tmnxVRtrGroups 57 } tmnxVRtrNotificationObjV7v0Group OBJECT-GROUP OBJECTS { vRtrID, vRtrIfIndex, vRtrDhcpPacketProblem, vRtrBfdSlotNumber, vRtrNumberOfBfdSessionsOnSlot, vRtrBfdMaxSessionReason, vRtrDHCP6ServerNetAddrType, vRtrDHCP6ServerNetAddr, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDHCP6OldAssignedNetAddrType, vRtrDHCP6OldAssignedNetAddr, vRtrDHCP6OldAssignedPrefixLen, vRtrDHCP6NewClientId, vRtrDHCP6OldClientId, vRtrDHCP6LeaseOverrideResult, vRtrInetStatRteCpeNotifyAddrType, vRtrInetStatRteCpeNotifyAddr, vRtrInetStaticRouteCpeStatus, vRtrManagedRouteInetAddrType, vRtrManagedRouteInetAddr, vRtrManagedRoutePrefixLen, vRtrFailureDescription, vRtrMaxRoutesType, vRtrSlotOrCpmFlag, vRtrNotifInetAddrType, vRtrNotifInetAddr } STATUS obsolete DESCRIPTION "The group of objects supporting management of notification objects on Alcatel-Lucent SROS 7.0 series systems." ::= { tmnxVRtrGroups 58 } tmnxVRtrNotificationV7v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrMidRouteTCA, tmnxVRtrHighRouteTCA, tmnxVRtrHighRouteCleared, tmnxVRtrIllegalLabelTCA, tmnxVRtrMcastMidRouteTCA, tmnxVRtrMcastMaxRoutesTCA, tmnxVRtrMcastMaxRoutesCleared, tmnxVRtrMaxArpEntriesTCA, tmnxVRtrMaxArpEntriesCleared, tmnxVRtrMaxRoutes, tmnxVRtrDHCPSuspiciousPcktRcvd, tmnxVRtrBfdSessionDown, tmnxVRtrBfdMaxSessionOnSlot, tmnxVRtrBfdPortTypeNotSupported, tmnxVRtrDHCPIfLseStatesExceeded, tmnxVRtrDHCP6RelayLseStExceeded, tmnxVRtrDHCP6ServerLseStExceeded, tmnxVRtrDHCP6LseStateOverride, tmnxVRtrDHCP6RelayReplyStripUni, tmnxVRtrDHCP6IllegalClientAddr, tmnxVRtrDHCP6AssignedIllegSubnet, tmnxVRtrDHCP6ClientMacUnresolved, tmnxVRtrBfdSessionUp, tmnxVRtrIPv6MidRouteTCA, tmnxVRtrIPv6HighRouteTCA, tmnxVRtrIPv6HighRouteCleared, tmnxVRtrStaticRouteCPEStatus, tmnxVRtrBfdSessionDeleted, tmnxVRtrBfdSessionProtChange, tmnxVRtrManagedRouteAddFailed, tmnxVRtrFibOccupancyThreshold, tmnxVRtrInetAddressAttachFailed } STATUS obsolete DESCRIPTION "The group of notifications supporting the transport and virtual router capabilities on version 7.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 59 } tmnxVRtrV8v0Group OBJECT-GROUP OBJECTS { vRtrRowStatus, vRtrAdminState, vRtrName, vRtrMaxNumRoutes, vRtrBgpStatus, vRtrMplsStatus, vRtrRipStatus, vRtrRsvpStatus, vRtrEcmpMaxRoutes, vRtrNewIfIndex, vRtrLdpStatus, -- vRtrIsIsStatus, vRtrRouterId, vRtrTriggeredPolicy, vRtrRouteDistinguisher, vRtrMidRouteThreshold, vRtrHighRouteThreshold, vRtrIllegalLabelThreshold, vRtrVpnId, vRtrDescription, vRtrGracefulRestart, vRtrGracefulRestartType, vRtrType, vRtrServiceId, vRtrCustId, vRtrIgmpStatus, vRtrMaxNumRoutesLogOnly, vRtrVrfTarget, vRtrVrfExportTarget, vRtrVrfImportTarget, vRtrPimStatus, vRtrMaxMcastNumRoutes, vRtrMaxMcastNumRoutesLogOnly, vRtrMcastMidRouteThreshold, vRtrIgnoreIcmpRedirect, vRtrMsdpStatus, vRtrVprnType, vRtrSecondaryVrfId, vRtrMldStatus, vRtrIPv6MaxNumRoutes, vRtrIPv6MidRouteThreshold, vRtrIPv6HighRouteThreshold, vRtrIPv6MaxNumRoutesLogOnly, vRtrIPv6IgnoreIcmpRedirect, vRtrMcPathMgmtPlcyName, vRtrImportPolicy1, vRtrImportPolicy2, vRtrImportPolicy3, vRtrImportPolicy4, vRtrImportPolicy5, vRtrExportPolicy1, vRtrExportPolicy2, vRtrExportPolicy3, vRtrExportPolicy4, vRtrExportPolicy5, vRtrOperState, vRtrDirectRoutes, vRtrDirectActiveRoutes, vRtrStaticRoutes, vRtrStaticActiveRoutes, vRtrOSPFRoutes, vRtrOSPFActiveRoutes, vRtrBGPRoutes, vRtrBGPActiveRoutes, vRtrISISRoutes, vRtrISISActiveRoutes, vRtrRIPRoutes, vRtrRIPActiveRoutes, vRtrAggregateRoutes, vRtrAggregateActiveRoutes, vRtrStatConfiguredIfs, vRtrStatActiveIfs, vRtrStatIllegalLabels, vRtrStatCurrNumRoutes, vRtrStatBGPVpnRoutes, vRtrStatBGPVpnActiveRoutes, vRtrStatTotalLdpTunnels, vRtrStatTotalSdpTunnels, vRtrStatActiveLdpTunnels, vRtrStatActiveSdpTunnels, vRtrMulticastRoutes, vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrSubMgmtRoutes, vRtrSubMgmtActiveRoutes, vRtrStatTotalRsvpTunnels, vRtrStatActiveRsvpTunnels, vRtrV6StatTotalRsvpTunnels, vRtrV6StatActiveRsvpTunnels, vRtrHostRoutes, vRtrHostActiveRoutes, vRtrV6HostRoutes, vRtrV6HostActiveRoutes, vRtrStatLocalARPEntries, vRtrStatStaticARPEntries, vRtrStatDynamicARPEntries, vRtrStatManagedARPEntries, vRtrStatInternalARPEntries, vRtrDHCP6DropStatLastCleared, vRtrDHCP6DropStatPktsDropped, vRtrDHCP6MsgStatsLstClrd, vRtrDHCP6MsgStatsRcvd, vRtrDHCP6MsgStatsSent, vRtrDHCP6MsgStatsDropped, vRtrInetStaticRouteNHTunnelName, vRtrManagedRoutes, vRtrManagedActiveRoutes, vRtrAS4Byte, vRtrConfederationAS4Byte, vRiaInetAddrPreferred, vRiaSubscrPrefix, vRiaSubscrPrefixType, vRiaSubscrHostRoutePopulate, vRtrIfAdmLnkLclAddrPreferred, vRtrIfAdminLinkLocalAddr, vRtrIfAdminLinkLocalAddrType, vRtrIfLsrIpLoadBalancing, vRtrIfDHCP6ProxyAdminState, vRtrIfDHCP6ProxyRenewTimer, vRtrIfDHCP6ProxyRebindTimer, vRtrIfDHCP6ProxyValidLifetime, vRtrIfDHCP6ProxyPrefLifetime, vRtrIfDHCP6ProxyApplications, vRtrIfDHCP6UserDb, vRtrSingleSfmOverloadAdminState, vRtrSingleSfmOverloadHldOffTime, vRtrSingleSfmOverloadState, vRtrSingleSfmOverloadStart, vRtrSingleSfmOverloadTime, vRtrLdpShortcut, vRtrLDPRoutes, vRtrLDPActiveRoutes, vRtrGrtState, vRtrGrtMaxExportRoutes, vRtrGrtExportPolicy1, vRtrGrtExportPolicy2, vRtrGrtExportPolicy3, vRtrGrtExportPolicy4, vRtrGrtExportPolicy5, vRtrVPNLeakRoutes, vRtrVPNLeakActiveRoutes, vRtrV6VPNLeakRoutes, vRtrV6VPNLeakActiveRoutes, vRtrInetCidrRouteNextHopType, vRtrInetCidrRouteNextHopOwner, vRtrInetCidrRouteNHOwnerAuxInfo, vRtrInetCidrRteTnlEnabledTime, vRtrV6SubMgmtRoutes, vRtrV6SubMgmtActiveRoutes, vRtrMvpnIpmsiType, vRtrMvpnSpmsiType, vRtrMobileHostRoutes, vRtrMobileHostActiveRoutes, vRtrV6MobileHostRoutes, vRtrV6MobileHostActiveRoutes, vRtrStatTotalBgpTunnels, vRtrStatActiveBgpTunnels } STATUS obsolete DESCRIPTION "The group of objects supporting management of transport and virtual routers new on version 8.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 60 } tmnxVRtrIfDHCPRelayV8v0Group OBJECT-GROUP OBJECTS { vRtrIfDHCPRelayInfoAction, vRtrIfDHCPRelayCircuitId, vRtrIfDHCPRelayRemoteId, vRtrIfDHCPRelayServer1, vRtrIfDHCPRelayServer2, vRtrIfDHCPRelayServer3, vRtrIfDHCPRelayServer4, vRtrIfDHCPRelayServer5, vRtrIfDHCPRelayServer6, vRtrIfDHCPRelayServer7, vRtrIfDHCPRelayServer8, vRtrIfDHCPRelayTrusted, vRtrIfDHCPAdminState, vRtrIfDHCPDescription, vRtrIfDHCPRelayRxPkts, vRtrIfDHCPRelayTxPkts, vRtrIfDHCPRelayRxMalformedPkts, vRtrIfDHCPRelayRxUntrustedPkts, vRtrIfDHCPRelayClientPktsDiscarded, vRtrIfDHCPRelayClientPktsRelayed, vRtrIfDHCPRelayServerPktsDiscarded, vRtrIfDHCPRelayServerPktsRelayed, vRtrIfDHCPRelayClientPktsSnooped, vRtrIfDHCPRelayServerPktsSnooped, vRtrIfDHCPRelayClientPktsProxRad, vRtrIfDHCPRelayClientPktsProxLS, vRtrIfDHCPRelayPktsGenRelease, vRtrIfDHCPRelayPktsGenForceRenew, vRtrIfDHCPLeasePopulate, vRtrIfDHCPOperLeasePopulate, vRtrIfDHCPGiAddressType, vRtrIfDHCPGiAddress, vRtrIfDHCPGiAddressAsSrc, vRtrIfDHCPMatchOption82, vRtrIfDHCPRelayRemoteIdStr, vRtrIfDHCPProxyAdminState, vRtrIfDHCPProxyServerAddr, vRtrIfDHCPProxyLeaseTime, vRtrIfDHCPProxyLTRadiusOverride, vRtrIfDHCPVendorIncludeOptions, vRtrIfDHCPVendorOptionString, vRtrIfDHCPLayer2Header, vRtrIfDHCPAntiSpoofMacAddr, vRtrIfDHCPClientApplications, vRtrIfLdpSyncTimer, vRtrIfDHCPUseArpForReply, vRtrIfDHCPRelayPlainBootp, vRtrIfDHCPUserDb -- vRtrIfDHCPCopyOption82 } STATUS obsolete DESCRIPTION "The group of objects supporting management of DHCP Relay on virtual interfaces on version 8.0 Alcatel-Lucent SROS series systems" ::= { tmnxVRtrGroups 61 } tmnxVRtrNetDomainGroup OBJECT-GROUP OBJECTS { vRtrNetDomainRowStatus, vRtrNetDomainLastChanged, vRtrNetDomainDesc, vRtrNetDomainIfAssociationCnt, vRtrNetDomainSdpAssociationCnt, vRtrIfNetDomainRowStatus, vRtrIfNetDomainLastChanged, vRtrIfNetDomainTblLastChanged, vRtrNetDomainTblLastChanged } STATUS current DESCRIPTION "The group of objects supporting network-domain optimization for Ingress SAP Queue allocation in version 8.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 62 } tmnxVRtrNotificationV8v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrMidRouteTCA, tmnxVRtrHighRouteTCA, tmnxVRtrHighRouteCleared, tmnxVRtrIllegalLabelTCA, tmnxVRtrMcastMidRouteTCA, tmnxVRtrMcastMaxRoutesTCA, tmnxVRtrMcastMaxRoutesCleared, tmnxVRtrMaxArpEntriesTCA, tmnxVRtrMaxArpEntriesCleared, tmnxVRtrMaxRoutes, tmnxVRtrDHCPSuspiciousPcktRcvd, tmnxVRtrBfdSessionDown, tmnxVRtrBfdMaxSessionOnSlot, tmnxVRtrBfdPortTypeNotSupported, tmnxVRtrBfdNoCpmNpResources, tmnxVRtrDHCPIfLseStatesExceeded, tmnxVRtrDHCP6RelayLseStExceeded, tmnxVRtrDHCP6ServerLseStExceeded, tmnxVRtrDHCP6LseStateOverride, tmnxVRtrDHCP6RelayReplyStripUni, tmnxVRtrDHCP6IllegalClientAddr, tmnxVRtrDHCP6AssignedIllegSubnet, tmnxVRtrDHCP6ClientMacUnresolved, tmnxVRtrBfdSessionUp, tmnxVRtrIPv6MidRouteTCA, tmnxVRtrIPv6HighRouteTCA, tmnxVRtrIPv6HighRouteCleared, tmnxVRtrStaticRouteCPEStatus, tmnxVRtrBfdSessionDeleted, tmnxVRtrBfdSessionProtChange, tmnxVRtrManagedRouteAddFailed, tmnxVRtrFibOccupancyThreshold, tmnxVRtrInetAddressAttachFailed, tmnxVRtrSingleSfmOverloadStateCh, tmnxVRtrGrtExportLimitReached, tmnxVRtrGrtRoutesExpLimitDropped, tmnxVRtrIfLdpSyncTimerStart, tmnxVRtrIfLdpSyncTimerStop } STATUS current DESCRIPTION "The group of notifications supporting the transport and virtual router capabilities on version 8.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 63 } tmnxVRtrObsoleteV8v0Group OBJECT-GROUP OBJECTS { vRtrIsIsStatus } STATUS current DESCRIPTION "The group of objects in TIMETRA-VRTR-MIB which are obsoleted in Alcatel-Lucent SROS 8.0 series systems." ::= { tmnxVRtrGroups 64 } tmnxVRtrTunIntV8v0Group OBJECT-GROUP OBJECTS { vRtrRsvpTunIfTableLastChanged, vRtrRsvpTunIfRowStatus, vRtrRsvpTunIfLastChanged, vRtrRsvpTunIfSessionId, vRtrRsvpTunIfTransmitInt, vRtrRsvpTunIfMultiplier, vRtrRsvpTunIfStandbyLspName, vRtrRsvpTunIfStandbyAddrType, vRtrRsvpTunIfStandbyAddr, vRtrRsvpTunIfIfIndex, vRtrRsvpTunIfHoldTimer, vRtrRsvpTunIfStandbySessionId, vRtrRsvpTunIfStandbyIfIndex, vRtrRsvpTunIfDescription, vRtrRsvpTunIfSrcTableLastChanged, vRtrRsvpTunIfSrcRowStatus, vRtrRsvpTunIfSrcLastChanged, vRtrRsvpTunIfSrcBfdEnable, vRtrRsvpTunIfSrcSessionId, vRtrRsvpTunIfSrcTransmitInt, vRtrRsvpTunIfSrcMultiplier, vRtrRsvpTunIfSrcStandbySessionId, vRtrLdpTunIfTableLastChanged, vRtrLdpTunIfRowStatus, vRtrLdpTunIfLastChanged, vRtrLdpTunIfIfIndex, vRtrLdpTunIfDescription, vRtrLdpTunIfRootNode } STATUS current DESCRIPTION "The group of objects supporting management of tunnel interface for implementation of P2MP-LSP on Alcatel-Lucent SROS 8.0 series systems." ::= { tmnxVRtrGroups 65 } tmnxVRtrBfdV8v0Group OBJECT-GROUP OBJECTS { vRtrIfBfdType, vRtrIfBfdSessionTimeSinceLastRx, vRtrIfBfdSessionTimeSinceLastTx } STATUS obsolete DESCRIPTION "The group of objects supporting Bi-directional Forwarding Detection added in release 8.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 66 } tmnxVRtrMvpnPmsiV8v0Group OBJECT-GROUP OBJECTS { vRtrMvpnIpmsiP2MPAdmin, vRtrMvpnSpmsiP2MPAdmin, vRtrMvpnIpmsiLspTemplate, vRtrMvpnSpmsiLspTemplate, vRtrMvpnSpmsiMaxLimit, vRtrInterASMvpn } STATUS current DESCRIPTION "The group of objects supporting management of Mvpn added in release 8.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 67 } tmnxVRtrFibStatsV8v0Group OBJECT-GROUP OBJECTS { vRtrFibStatStaticRoutes, vRtrFibStatDirectRoutes, vRtrFibStatHostRoutes, vRtrFibStatBGPRoutes, vRtrFibStatBGPVpnRoutes, vRtrFibStatOSPFRoutes, vRtrFibStatISISRoutes, vRtrFibStatRIPRoutes, vRtrFibStatAggrRoutes, vRtrFibStatSubMgmtRoutes, vRtrFibStatManagedRoutes, vRtrFibStatV6StaticRoutes, vRtrFibStatV6DirectRoutes, vRtrFibStatV6HostRoutes, vRtrFibStatV6BGPRoutes, vRtrFibStatV6BGPVpnRoutes, vRtrFibStatV6OSPFRoutes, vRtrFibStatV6ISISRoutes, vRtrFibStatV6RIPRoutes, vRtrFibStatV6AggrRoutes, vRtrFibStatV6SubMgmtRoutes, vRtrFibStatV6ManagedRoutes, vRtrFibStatOverflows, vRtrFibStatAlarmCount, vRtrFibStatLastAlarmTime, vRtrFibStatHighUtilization, vRtrFibStatNextHopIPActive, vRtrFibStatNextHopIPAvailable, vRtrFibStatNextHopTunnelActive, vRtrFibStatNextHopTunnelAvailable, vRtrFibStatMobileHostRoutes, vRtrFibStatV6MobileHostRoutes, vRtrFibStatVPNLeakRoutes, vRtrFibStatV6VPNLeakRoutes } STATUS current DESCRIPTION "The group of objects supporting FIB summary counts on version 8.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 68 } tmnxVRtrV9v0Group OBJECT-GROUP OBJECTS { vRtrIfIngressIpv4Flowspec, vRtrFibPriority, vRtrCarrierCarrierVpn, vRtrLabelMode, vRtrBgpSharedQueue, vRtrBgpSharedQueueCIR, vRtrBgpSharedQueuePIR, vRiaHoldUpTime, vRiaTrackSrrpInstance, vRtrMvpnMdtSafi, vRtrMvpnMdtDefGrpAddrType, vRtrMvpnMdtDefGrpAddress, vRtrInetCidrRouteBkupFlags, vRtrInetCidrRouteBkupNextHopType, vRtrInetCidrRouteBkupNextHop, vRtrInetCidrRouteBkupMetric, vRtrInetCidrRouteNextHopRepCount, vRtrInetAllCidrRouteBkupFlags, vRtrInetAllCidrRouteBkupNHopType, vRtrInetAllCidrRouteBkupNextHop, vRtrInetAllCidrRouteBkupMetric, vRtrInetAllCidrRouteNHopRepCount } STATUS current DESCRIPTION "The group of new objects supporting management of transport and virtual routers new on version 9.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 69 } tmnxVRtrIfDHCP6V9v0Group OBJECT-GROUP OBJECTS { vRtrIfDHCP6LocalDhcpServerName, vRtrIfDHCP6RelayApplications } STATUS current DESCRIPTION "The group of new objects supporting management of DHCPv6 on version 9.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 70 } tmnxVRtrQPPBV9v0R4Group OBJECT-GROUP OBJECTS { vRtrInetStaticRouteFC, vRtrInetStaticRouteFCPriority, vRtrIfQosRouteLookup, vRtrIfIpv6QosRouteLookup, vRtrInetCidrRouteNHFC, vRtrInetCidrRouteNHPriority } STATUS current DESCRIPTION "The group of objects supporting QoS policy propagation using BGP in release 9.0 R4 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 71} tmnxVRtrBfdV9v0Group OBJECT-GROUP OBJECTS { vRtrIfBfdExtTableLastChanged, vRtrIfBfdExtAdminState, vRtrIfBfdExtTransmitInterval, vRtrIfBfdExtReceiveInterval, vRtrIfBfdExtMultiplier, vRtrIfBfdExtEchoInterval, vRtrIfBfdExtType, vRtrIfBfdSessionOperState, vRtrIfBfdSessionState, vRtrIfBfdSessionOperFlags, vRtrIfBfdSessionMesgRecv, vRtrIfBfdSessionMesgSent, vRtrIfBfdSessionLastDownTime, vRtrIfBfdSessionLastUpTime, vRtrIfBfdSessionUpCount, vRtrIfBfdSessionDownCount, vRtrIfBfdSessionLclDisc, vRtrIfBfdSessionRemDisc, vRtrIfBfdSessionProtocols, vRtrIfBfdSessionTxInterval, vRtrIfBfdSessionRxInterval, vRtrIfBfdSessionType, vRtrIfBfdSessionTimeSinceLastRx, vRtrIfBfdSessionTimeSinceLastTx } STATUS obsolete DESCRIPTION "The group of objects supporting Bi-directional Forwarding Detection on version 9.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 72 } tmnxVRtrIpPoolGroup OBJECT-GROUP OBJECTS { vRtrIpPoolTableLastChanged, vRtrIpPoolRowStatus, vRtrIpPoolLastChanged, vRtrIpPoolDescription, vRtrIpPoolExclusive, vRtrIpPoolStatFree, vRtrIpPoolStatHeld, vRtrIpPoolStatAllocated, vRtrIpPoolAddressHoldTimer, vRtrIpPoolAddrTableLastChanged, vRtrIpPoolAddrRowStatus, vRtrIpPoolAddrLastChanged, vRtrIpPoolAddrBlock, vRtrIpPoolAddrIpv6AssignedLen, vRtrIpPoolSuppress0and255 } STATUS current DESCRIPTION "The group of objects supporting management of IP pools on Alcatel 7x50 SR series systems." ::= { tmnxVRtrMobGatewayGroups 1 } tmnxVRtrIfIpReasV9v0Group OBJECT-GROUP OBJECTS { vRtrIfIpReasPortID, vRtrIfIpReasContextValue, vRtrIfIpReasFragPktsRcvd, vRtrIfIpReasFragPktsRcvdLow32, vRtrIfIpReasFragPktsRcvdHigh32, vRtrIfIpReasFragBytesRcvd, vRtrIfIpReasFragBytesRcvdLow32, vRtrIfIpReasFragBytesRcvdHigh32, vRtrIfIpReasFragPktsReas, vRtrIfIpReasFragPktsReasLow32, vRtrIfIpReasFragPktsReasHigh32, vRtrIfIpReasFragBytesReas, vRtrIfIpReasFragBytesReasLow32, vRtrIfIpReasFragBytesReasHigh32, vRtrIfIpReasFragReasErrors, vRtrIfIpReasFragReasErrorsLow32, vRtrIfIpReasFragReasErrorsHigh32, vRtrIfIpReasFragDisc, vRtrIfIpReasFragDiscLow32, vRtrIfIpReasFragDiscHigh32, vRtrIfIpReasOutBufRes, vRtrIfIpReasOutBufResLow32, vRtrIfIpReasOutBufResHigh32, vRtrIfIpReasPktsRx, vRtrIfIpReasPktsRxLow32, vRtrIfIpReasPktsRxHigh32, vRtrIfIpReasBytesRx, vRtrIfIpReasBytesRxLow32, vRtrIfIpReasBytesRxHigh32, vRtrIfIpReasPktsTx, vRtrIfIpReasPktsTxLow32, vRtrIfIpReasPktsTxHigh32, vRtrIfIpReasBytesTx, vRtrIfIpReasBytesTxLow32, vRtrIfIpReasBytesTxHigh32, vRtrIfIpReasV6FragPktsRcvd, vRtrIfIpReasV6FragPktsRcvdLow32, vRtrIfIpReasV6FragPktsRcvdHigh32, vRtrIfIpReasV6FragBytesRcvd, vRtrIfIpReasV6FragBytesRcvdL32, vRtrIfIpReasV6FragBytesRcvdH32, vRtrIfIpReasV6FragPktsReas, vRtrIfIpReasV6FragPktsReasLow32, vRtrIfIpReasV6FragPktsReasHigh32, vRtrIfIpReasV6FragBytesReas, vRtrIfIpReasV6FragBytesReasL32, vRtrIfIpReasV6FragBytesReasH32, vRtrIfIpReasV6FragReasErrors, vRtrIfIpReasV6FragReasErrorsL32, vRtrIfIpReasV6FragReasErrorsH32, vRtrIfIpReasV6FragDisc, vRtrIfIpReasV6FragDiscLow32, vRtrIfIpReasV6FragDiscHigh32, vRtrIfIpReasV6OutBufRes, vRtrIfIpReasV6OutBufResLow32, vRtrIfIpReasV6OutBufResHigh32, vRtrIfIpReasV6PktsRx, vRtrIfIpReasV6PktsRxLow32, vRtrIfIpReasV6PktsRxHigh32, vRtrIfIpReasV6BytesRx, vRtrIfIpReasV6BytesRxLow32, vRtrIfIpReasV6BytesRxHigh32, vRtrIfIpReasV6PktsTx, vRtrIfIpReasV6PktsTxLow32, vRtrIfIpReasV6PktsTxHigh32, vRtrIfIpReasV6BytesTx, vRtrIfIpReasV6BytesTxLow32, vRtrIfIpReasV6BytesTxHigh32, vRtrIfSpeed } STATUS current DESCRIPTION "The group of objects supporting IP Reassembly on version 9.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 73 } tmnxVRtrIfStatsV9v0Group OBJECT-GROUP OBJECTS { vRtrIfRxBytes, vRtrIfRxBytesHigh32, vRtrIfRxBytesLow32, vRtrIfRxPkts, vRtrIfRxPktsHigh32, vRtrIfRxPktsLow32, vRtrIfTxV4Bytes, vRtrIfTxV4BytesHigh32, vRtrIfTxV4BytesLow32, vRtrIfTxV4DiscardBytes, vRtrIfTxV4DiscardBytesHigh32, vRtrIfTxV4DiscardBytesLow32, vRtrIfTxV4DiscardPkts, vRtrIfTxV4DiscardPktsHigh32, vRtrIfTxV4DiscardPktsLow32, vRtrIfTxV4Pkts, vRtrIfTxV4PktsHigh32, vRtrIfTxV4PktsLow32, vRtrIfTxV6Bytes, vRtrIfTxV6BytesHigh32, vRtrIfTxV6BytesLow32, vRtrIfTxV6DiscardBytes, vRtrIfTxV6DiscardBytesHigh32, vRtrIfTxV6DiscardBytesLow32, vRtrIfTxV6DiscardPkts, vRtrIfTxV6DiscardPktsHigh32, vRtrIfTxV6DiscardPktsLow32, vRtrIfTxV6Pkts, vRtrIfTxV6PktsHigh32, vRtrIfTxV6PktsLow32 } STATUS current DESCRIPTION "The group of objects supporting IP Reassembly on version 9.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 74 } tmnxVRtrNotificationObjV8v0Group OBJECT-GROUP OBJECTS { vRtrID, vRtrIfIndex, vRtrDhcpPacketProblem, vRtrBfdSlotNumber, vRtrNumberOfBfdSessionsOnSlot, vRtrBfdMaxSessionReason, vRtrDHCP6ServerNetAddrType, vRtrDHCP6ServerNetAddr, vRtrDHCP6ClientNetAddrType, vRtrDHCP6ClientNetAddr, vRtrDHCP6AssignedNetAddrType, vRtrDHCP6AssignedNetAddr, vRtrDHCP6AssignedPrefixLen, vRtrDHCP6OldAssignedNetAddrType, vRtrDHCP6OldAssignedNetAddr, vRtrDHCP6OldAssignedPrefixLen, vRtrDHCP6NewClientId, vRtrDHCP6OldClientId, vRtrDHCP6LeaseOverrideResult, vRtrInetStatRteCpeNotifyAddrType, vRtrInetStatRteCpeNotifyAddr, vRtrInetStaticRouteCpeStatus, vRtrManagedRouteInetAddrType, vRtrManagedRouteInetAddr, vRtrManagedRoutePrefixLen, vRtrFailureDescription, vRtrMaxRoutesType, vRtrSlotOrCpmFlag, vRtrNotifInetAddrType, vRtrNotifInetAddr, vRtrIfBfdSessChangedProtocol, vRtrIfBfdSessProtoChngdState } STATUS current DESCRIPTION "The group of objects supporting management of notification objects on Alcatel-Lucent SROS 8.0 series systems." ::= { tmnxVRtrGroups 75 } tmnxVRtrIfDHCPRelayV9v0Group OBJECT-GROUP OBJECTS { vRtrIfDHCPRelayInfoAction, vRtrIfDHCPRelayCircuitId, vRtrIfDHCPRelayRemoteId, vRtrIfDHCPRelayServer1, vRtrIfDHCPRelayServer2, vRtrIfDHCPRelayServer3, vRtrIfDHCPRelayServer4, vRtrIfDHCPRelayServer5, vRtrIfDHCPRelayServer6, vRtrIfDHCPRelayServer7, vRtrIfDHCPRelayServer8, vRtrIfDHCPRelayTrusted, vRtrIfDHCPAdminState, vRtrIfDHCPDescription, vRtrIfDHCPRelayRxPkts, vRtrIfDHCPRelayTxPkts, vRtrIfDHCPRelayRxMalformedPkts, vRtrIfDHCPRelayRxUntrustedPkts, vRtrIfDHCPRelayClientPktsDiscarded, vRtrIfDHCPRelayClientPktsRelayed, vRtrIfDHCPRelayServerPktsDiscarded, vRtrIfDHCPRelayServerPktsRelayed, vRtrIfDHCPRelayClientPktsSnooped, vRtrIfDHCPRelayServerPktsSnooped, vRtrIfDHCPRelayClientPktsProxRad, vRtrIfDHCPRelayClientPktsProxLS, vRtrIfDHCPRelayPktsGenRelease, vRtrIfDHCPRelayPktsGenForceRenew, vRtrIfDHCPLeasePopulate, vRtrIfDHCPOperLeasePopulate, vRtrIfDHCPGiAddressType, vRtrIfDHCPGiAddress, vRtrIfDHCPGiAddressAsSrc, vRtrIfDHCPMatchOption82, vRtrIfDHCPRelayRemoteIdStr, vRtrIfDHCPProxyAdminState, vRtrIfDHCPProxyServerAddr, vRtrIfDHCPProxyLeaseTime, vRtrIfDHCPProxyLTRadiusOverride, vRtrIfDHCPVendorIncludeOptions, vRtrIfDHCPVendorOptionString, vRtrIfDHCPLayer2Header, vRtrIfDHCPAntiSpoofMacAddr, vRtrIfDHCPClientApplications, vRtrIfLdpSyncTimer, vRtrIfDHCPUseArpForReply, vRtrIfDHCPRelayPlainBootp, vRtrIfDHCPUserDb, -- vRtrIfDHCPCopyOption82 vRtrIfDHCPFilterId } STATUS current DESCRIPTION "The group of objects supporting management of DHCP Relay on virtual interfaces on version 9.0 Alcatel-Lucent SROS series systems" ::= { tmnxVRtrGroups 76 } tmnxVRtrNatRedGroup OBJECT-GROUP OBJECTS { vRtrNatRoutes, vRtrNatActiveRoutes, vRtrV6NatRoutes, vRtrV6NatActiveRoutes, vRtrFibStatNatRoutes, vRtrFibStatV6NatRoutes } STATUS current DESCRIPTION "The group of objects supporting management of NAT redundancy on Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 77 } tmnxVRtrIfV9v0Group OBJECT-GROUP OBJECTS { vRtrIfInfo, vRtrIfInfoEncrypted, vRtrIfTxBytes, vRtrIfTxBytesHigh32, vRtrIfTxBytesLow32, vRtrIfTxPkts, vRtrIfTxPktsHigh32, vRtrIfTxPktsLow32, vRtrIfStatusString, vRtrIfOperDownReason } STATUS obsolete DESCRIPTION "The group of objects supporting management of router interfaces on Alcatel-Lucent SROS series systems in 9.0 release." ::= { tmnxVRtrGroups 78 } tmnxVRtrMSPwV9v0Group OBJECT-GROUP OBJECTS { vRtrMsPwL2RtIsBestRoute, vRtrMsPwL2RtRDCommunity, vRtrMsPwL2RtAge } STATUS current DESCRIPTION "The group of new objects supporting management of virtual router dynamic multi-segement pseudo-wire features new on version 9.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 79 } tmnxVRtrMvpnSrcRedV9v0R4Group OBJECT-GROUP OBJECTS { vRtrMvpnIpmsiEnableBfdRoot, vRtrMvpnIpmsiEnableBfdLeaf, vRtrMvpnIpmsiBfdRtTraInt, vRtrMvpnIpmsiBfdRootMult } STATUS current DESCRIPTION "The group of objects supporting management of MVPN source redundancy on version 9.0R4 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 80 } tmnxVRtrObsoletedBfdV9v0Group OBJECT-GROUP OBJECTS { vRtrIfBfdAdminState, vRtrIfBfdTransmitInterval, vRtrIfBfdReceiveInterval, vRtrIfBfdMultiplier, vRtrIfBfdEchoInterval, vRtrIfBfdType } STATUS current DESCRIPTION "The group of objects obsoleted supporting Bi-directional Forwarding Detection on version 9.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 81 } tmnxVRtrStatV9v0Group OBJECT-GROUP OBJECTS { vRtrISISAltRoutes, vRtrISISActiveAltRoutes, vRtrBGPAltRoutes, vRtrBGPActiveAltRoutes, vRtrStatCurrNumAltRoutes, vRtrV6ISISAltRoutes, vRtrV6ISISActiveAltRoutes, vRtrV6BGPAltRoutes, vRtrV6BGPActiveAltRoutes, vRtrV6StatCurrNumAltRoutes } STATUS current DESCRIPTION "The group of objects supporting management of statistics on version 9.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 82 } tmnxVRtruRPFV10v0Group OBJECT-GROUP OBJECTS { vRtrIfIpv6uRPFCheckState, vRtrIfIpv6uRPFCheckMode } STATUS current DESCRIPTION "The group of objects supporting management of router interfaces on Alcatel-Lucent SROS series systems in 10.0 release." ::= { tmnxVRtrGroups 83 } tmnxVRtrPolicyGroup OBJECT-GROUP OBJECTS { vRtrVrfImportPolicy1, vRtrVrfImportPolicy2, vRtrVrfImportPolicy3, vRtrVrfImportPolicy4, vRtrVrfImportPolicy5, vRtrVrfImportPolicy6, vRtrVrfImportPolicy7, vRtrVrfImportPolicy8, vRtrVrfImportPolicy9, vRtrVrfImportPolicy10, vRtrVrfImportPolicy11, vRtrVrfImportPolicy12, vRtrVrfImportPolicy13, vRtrVrfImportPolicy14, vRtrVrfImportPolicy15, vRtrVrfExportPolicy1, vRtrVrfExportPolicy2, vRtrVrfExportPolicy3, vRtrVrfExportPolicy4, vRtrVrfExportPolicy5, vRtrVrfExportPolicy6, vRtrVrfExportPolicy7, vRtrVrfExportPolicy8, vRtrVrfExportPolicy9, vRtrVrfExportPolicy10, vRtrVrfExportPolicy11, vRtrVrfExportPolicy12, vRtrVrfExportPolicy13, vRtrVrfExportPolicy14, vRtrVrfExportPolicy15, vRtrMvpnVrfImportPolicy1, vRtrMvpnVrfImportPolicy2, vRtrMvpnVrfImportPolicy3, vRtrMvpnVrfImportPolicy4, vRtrMvpnVrfImportPolicy5, vRtrMvpnVrfImportPolicy6, vRtrMvpnVrfImportPolicy7, vRtrMvpnVrfImportPolicy8, vRtrMvpnVrfImportPolicy9, vRtrMvpnVrfImportPolicy10, vRtrMvpnVrfImportPolicy11, vRtrMvpnVrfImportPolicy12, vRtrMvpnVrfImportPolicy13, vRtrMvpnVrfImportPolicy14, vRtrMvpnVrfImportPolicy15, vRtrMvpnVrfExportPolicy1, vRtrMvpnVrfExportPolicy2, vRtrMvpnVrfExportPolicy3, vRtrMvpnVrfExportPolicy4, vRtrMvpnVrfExportPolicy5, vRtrMvpnVrfExportPolicy6, vRtrMvpnVrfExportPolicy7, vRtrMvpnVrfExportPolicy8, vRtrMvpnVrfExportPolicy9, vRtrMvpnVrfExportPolicy10, vRtrMvpnVrfExportPolicy11, vRtrMvpnVrfExportPolicy12, vRtrMvpnVrfExportPolicy13, vRtrMvpnVrfExportPolicy14, vRtrMvpnVrfExportPolicy15 } STATUS current DESCRIPTION "The group of objects supporting management of transport and virtual routers on Alcatel-Lucent SROS series systems in 10.0 release." ::= { tmnxVRtrGroups 84 } tmnxVRtrIfDHCP6V10v0Group OBJECT-GROUP OBJECTS { vRtrIfDHCP6LinkAddress } STATUS current DESCRIPTION "The group of new objects supporting management of DHCPv6 since version 10.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 85 } tmnxVRtrGlobalV10v0Group OBJECT-GROUP OBJECTS { vRtrIfTmsOffRampVprn, vRtrIfTmsMgmtVprn, vRtrVpnBackupPath, vRtrIpFastReroute, vRtrDnsTableLastCh, vRtrDnsLastCh, vRtrDnsRowStatus, vRtrDnsAdminState, vRtrDnsPrimaryAddrType, vRtrDnsPrimaryAddr, vRtrDnsSecondaryAddrType, vRtrDnsSecondaryAddr, vRtrDnsTertiaryAddrType, vRtrDnsTertiaryAddr, vRtrDnsIpv4SourceAddr, vRtrDnsIpv6SourceAddr, vRtrIfInfo, vRtrIfTxBytes, vRtrIfTxBytesHigh32, vRtrIfTxBytesLow32, vRtrIfTxPkts, vRtrIfTxPktsHigh32, vRtrIfTxPktsLow32, vRtrIfStatusString, vRtrIfOperDownReason } STATUS current DESCRIPTION "The group of objects supporting management of additional features on Alcatel-Lucent SROS series systems release 10.0." ::= { tmnxVRtrGroups 86 } tmnxVRtrQosQGrplV10v0Group OBJECT-GROUP OBJECTS { vRtrIfQosNetworkPolicyId, vRtrIfQosEgrPortRedirectQGrp, vRtrIfQosEgrQGrpInstanceId, vRtrIfQosIngFpRedirectQGrp, vRtrIfQosIngQGrpInstanceId } STATUS current DESCRIPTION "The group of objects supporting management of QoS queue groups on Alcatel-Lucent SROS series systems release 10.0." ::= { tmnxVRtrGroups 87 } tmnxVRtrStatV10v0Group OBJECT-GROUP OBJECTS { vRtrBGPVPNAltRoutes, vRtrBGPVPNActiveAltRoutes, vRtrV6BGPVPNAltRoutes, vRtrV6BGPVPNActiveAltRoutes, vRtrOSPFAltRoutes, vRtrOSPFActiveAltRoutes, vRtrV6OSPFAltRoutes, vRtrV6OSPFActiveAltRoutes, vRtrPeriodicRoutes, vRtrPeriodicActiveRoutes, vRtrV6PeriodicRoutes, vRtrV6PeriodicActiveRoutes, vRtrStatTotalMplsTpTunnels, vRtrStatActiveMplsTpTunnels } STATUS current DESCRIPTION "The group of objects supporting management of statistics on version 10.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 88 } tmnxVRtrIfObsoletedV10v0Group OBJECT-GROUP OBJECTS{ vRtrImportPolicy1, vRtrImportPolicy2, vRtrImportPolicy3, vRtrImportPolicy4, vRtrImportPolicy5, vRtrExportPolicy1, vRtrExportPolicy2, vRtrExportPolicy3, vRtrExportPolicy4, vRtrExportPolicy5, vRtrMvpnExportPolicy1, vRtrMvpnExportPolicy2, vRtrMvpnExportPolicy3, vRtrMvpnExportPolicy4, vRtrMvpnExportPolicy5, vRtrMvpnImportPolicy1, vRtrMvpnImportPolicy2, vRtrMvpnImportPolicy3, vRtrMvpnImportPolicy4, vRtrMvpnImportPolicy5, vRtrIfInfoEncrypted, vRtrIfQosPolicyId, vRtrIfQosQGrp } STATUS current DESCRIPTION "The group of objects obsoleted in version 10.0 of Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 89 } tmnxVRtrV10v0Group OBJECT-GROUP OBJECTS { vRtrRowStatus, vRtrAdminState, vRtrName, vRtrMaxNumRoutes, vRtrBgpStatus, vRtrMplsStatus, vRtrRipStatus, vRtrRsvpStatus, vRtrEcmpMaxRoutes, vRtrNewIfIndex, vRtrLdpStatus, -- vRtrIsIsStatus, vRtrRouterId, vRtrTriggeredPolicy, vRtrRouteDistinguisher, vRtrMidRouteThreshold, vRtrHighRouteThreshold, vRtrIllegalLabelThreshold, vRtrVpnId, vRtrDescription, vRtrGracefulRestart, vRtrGracefulRestartType, vRtrType, vRtrServiceId, vRtrCustId, vRtrIgmpStatus, vRtrMaxNumRoutesLogOnly, vRtrVrfTarget, vRtrVrfExportTarget, vRtrVrfImportTarget, vRtrPimStatus, vRtrMaxMcastNumRoutes, vRtrMaxMcastNumRoutesLogOnly, vRtrMcastMidRouteThreshold, vRtrIgnoreIcmpRedirect, vRtrMsdpStatus, vRtrVprnType, vRtrSecondaryVrfId, vRtrMldStatus, vRtrIPv6MaxNumRoutes, vRtrIPv6MidRouteThreshold, vRtrIPv6HighRouteThreshold, vRtrIPv6MaxNumRoutesLogOnly, vRtrIPv6IgnoreIcmpRedirect, vRtrMcPathMgmtPlcyName, vRtrOperState, vRtrDirectRoutes, vRtrDirectActiveRoutes, vRtrStaticRoutes, vRtrStaticActiveRoutes, vRtrOSPFRoutes, vRtrOSPFActiveRoutes, vRtrBGPRoutes, vRtrBGPActiveRoutes, vRtrISISRoutes, vRtrISISActiveRoutes, vRtrRIPRoutes, vRtrRIPActiveRoutes, vRtrAggregateRoutes, vRtrAggregateActiveRoutes, vRtrStatConfiguredIfs, vRtrStatActiveIfs, vRtrStatIllegalLabels, vRtrStatCurrNumRoutes, vRtrStatBGPVpnRoutes, vRtrStatBGPVpnActiveRoutes, vRtrStatTotalLdpTunnels, vRtrStatTotalSdpTunnels, vRtrStatActiveLdpTunnels, vRtrStatActiveSdpTunnels, vRtrMulticastRoutes, vRtrStatActiveARPEntries, vRtrStatTotalARPEntries, vRtrSubMgmtRoutes, vRtrSubMgmtActiveRoutes, vRtrStatTotalRsvpTunnels, vRtrStatActiveRsvpTunnels, vRtrV6StatTotalRsvpTunnels, vRtrV6StatActiveRsvpTunnels, vRtrHostRoutes, vRtrHostActiveRoutes, vRtrV6HostRoutes, vRtrV6HostActiveRoutes, vRtrStatLocalARPEntries, vRtrStatStaticARPEntries, vRtrStatDynamicARPEntries, vRtrStatManagedARPEntries, vRtrStatInternalARPEntries, vRtrDHCP6DropStatLastCleared, vRtrDHCP6DropStatPktsDropped, vRtrDHCP6MsgStatsLstClrd, vRtrDHCP6MsgStatsRcvd, vRtrDHCP6MsgStatsSent, vRtrDHCP6MsgStatsDropped, vRtrInetStaticRouteNHTunnelName, vRtrManagedRoutes, vRtrManagedActiveRoutes, vRtrAS4Byte, vRtrConfederationAS4Byte, vRiaInetAddrPreferred, vRiaSubscrPrefix, vRiaSubscrPrefixType, vRiaSubscrHostRoutePopulate, vRtrIfAdmLnkLclAddrPreferred, vRtrIfAdminLinkLocalAddr, vRtrIfAdminLinkLocalAddrType, vRtrIfLsrIpLoadBalancing, vRtrIfDHCP6ProxyAdminState, vRtrIfDHCP6ProxyRenewTimer, vRtrIfDHCP6ProxyRebindTimer, vRtrIfDHCP6ProxyValidLifetime, vRtrIfDHCP6ProxyPrefLifetime, vRtrIfDHCP6ProxyApplications, vRtrIfDHCP6UserDb, vRtrSingleSfmOverloadAdminState, vRtrSingleSfmOverloadHldOffTime, vRtrSingleSfmOverloadState, vRtrSingleSfmOverloadStart, vRtrSingleSfmOverloadTime, vRtrLdpShortcut, vRtrLDPRoutes, vRtrLDPActiveRoutes, vRtrGrtState, vRtrGrtMaxExportRoutes, vRtrGrtExportPolicy1, vRtrGrtExportPolicy2, vRtrGrtExportPolicy3, vRtrGrtExportPolicy4, vRtrGrtExportPolicy5, vRtrVPNLeakRoutes, vRtrVPNLeakActiveRoutes, vRtrV6VPNLeakRoutes, vRtrV6VPNLeakActiveRoutes, vRtrInetCidrRouteNextHopType, vRtrInetCidrRouteNextHopOwner, vRtrInetCidrRouteNHOwnerAuxInfo, vRtrInetCidrRteTnlEnabledTime, vRtrV6SubMgmtRoutes, vRtrV6SubMgmtActiveRoutes, vRtrMvpnIpmsiType, vRtrMvpnSpmsiType, vRtrMobileHostRoutes, vRtrMobileHostActiveRoutes, vRtrV6MobileHostRoutes, vRtrV6MobileHostActiveRoutes, vRtrStatTotalBgpTunnels, vRtrStatActiveBgpTunnels, vRtrMvpnVrfTarget, vRtrMvpnVrfExportTarget, vRtrMvpnVrfImportTarget, vRtrMvpnVrfTargetUnicast, vRtrMvpnVrfExportTargetUnicast, vRtrMvpnVrfImportTargetUnicast, vRtrMvpnImportPolicyUnicast, vRtrMvpnExportPolicyUnicast, vRtrMvpnCMcastImportRT, vRtrGrtMaxIpv6ExportRoutes, vRtrInetAggrNextHopType, vRtrInetAllCidrRteTnlEnabledTime, vRtrInetAllCidrRtNextHopType, vRtrInetAllCidrRtNextHopOwner, vRtrInetAllCidrRtNHOwnerAuxInfo, vRtrInetAllCidrRtBkupNHType, vRtrInetAllCidrRtBkupNHOwner, vRtrInetAllCidrRtBkupNHOwnAxInfo } STATUS current DESCRIPTION "The group of objects supporting management of transport and virtual routers in Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 90 } tmnxVRtrIfV10v0Group OBJECT-GROUP OBJECTS { vRtrIfTotalNumber, vRtrIfRowStatus, vRtrIfType, vRtrIfName, vRtrIfPortID, vRtrIfEncapValue, vRtrIfAdminState, vRtrIfOperState, vRtrIfAlias, vRtrIfPhysicalAddress, vRtrIfArpTimeout, vRtrIfIcmpMaskReply, vRtrIfIcmpRedirects, vRtrIfIcmpNumRedirects, vRtrIfIcmpRedirectsTime, vRtrIfIcmpUnreachables, vRtrIfIcmpNumUnreachables, vRtrIfIcmpUnreachablesTime, vRtrIfIcmpTtlExpired, vRtrIfIcmpNumTtlExpired, vRtrIfIcmpTtlExpiredTime, vRtrIfNtpBroadcast, vRtrIfUnnumbered, vRtrIfMtu, vRtrIfIngressFilterId, vRtrIfEgressFilterId, vRtrIfDirectedBroadcast, vRtrIfMplsStatus, vRtrIfUnnumberedIf, vRtrIfCflowd, vRtrIfVPNClass, vRtrIfDescription, vRtrIfProtocol, vRtrIfTosMarkingTrusted, vRtrIfServiceId, vRtrIfArpPopulate, vRtrIfLastOperStateChange, vRtrIfOperMtu, vRtrIfGlobalIndex, vRtrIfProxyArp, vRtrIfProxyArpLocal, vRtrIfProxyArpPolicy1, vRtrIfProxyArpPolicy2, vRtrIfProxyArpPolicy3, vRtrIfProxyArpPolicy4, vRtrIfProxyArpPolicy5, vRtrIfNameIndex, vRtrIfDHCPRelayInfoAction, vRtrIfDHCPRelayCircuitId, vRtrIfDHCPRelayRemoteId, vRtrIfDHCPRelayServer1, vRtrIfDHCPRelayServer2, vRtrIfDHCPRelayServer3, vRtrIfDHCPRelayServer4, vRtrIfDHCPRelayServer5, vRtrIfDHCPRelayServer6, vRtrIfDHCPRelayServer7, vRtrIfDHCPRelayServer8, vRtrIfDHCPRelayTrusted, vRtrIfDHCPAdminState, vRtrIfDHCPDescription, vRtrIfDHCPRelayRxPkts, vRtrIfDHCPRelayTxPkts, vRtrIfDHCPRelayRxMalformedPkts, vRtrIfDHCPRelayRxUntrustedPkts, vRtrIfDHCPRelayClientPktsDiscarded, vRtrIfDHCPRelayClientPktsRelayed, vRtrIfDHCPRelayServerPktsDiscarded, vRtrIfDHCPRelayServerPktsRelayed, vRtrIfDHCPRelayClientPktsSnooped, vRtrIfDHCPRelayServerPktsSnooped, vRtrIfDHCPRelayClientPktsProxRad, vRtrIfDHCPRelayClientPktsProxLS, vRtrIfDHCPRelayPktsGenRelease, vRtrIfDHCPRelayPktsGenForceRenew, vRtrIfDHCPLeasePopulate, vRtrIfDHCPOperLeasePopulate, vRtrIfDHCPGiAddressType, vRtrIfDHCPGiAddress, vRtrIfDHCPGiAddressAsSrc, vRtrIfDHCPMatchOption82, vRtrIfDHCPRelayRemoteIdStr, vRtrIfDHCPProxyAdminState, vRtrIfDHCPProxyServerAddr, vRtrIfDHCPProxyLeaseTime, vRtrIfDHCPProxyLTRadiusOverride, vRtrIfDHCPVendorIncludeOptions, vRtrIfDHCPVendorOptionString, vRtrIfGlobalIndexvRtrID, vRtrIfGlobalIndexvRtrIfIndex, vRtrIfDelaySeconds, vRtrIfDelayUpTimer, vRtrIfInitDelayEnable, vRtrInetCidrRouteBkupNHType, vRtrInetCidrRouteBkupNHOwner, vRtrInetCidrRouteBkupNHOwnAxInfo } STATUS current DESCRIPTION "The group of objects supporting management of virtual interfaces on version 10.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 91 } tmnxVRtrNotificationV10v0Group NOTIFICATION-GROUP NOTIFICATIONS { tmnxVRtrGrtV6ExportLimitReached, tmnxVRtrGrtV6RoutesExpLimDropped } STATUS current DESCRIPTION "The group of notifications supporting the transport and virtual router capabilities on version 10.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 92 } tmnxVRtrGrtLocalMgmtV10v0Group OBJECT-GROUP OBJECTS { vRtrGrtLocalMgmtState } STATUS current DESCRIPTION "The group of objects supporting management of virtual interfaces on version 10.0 Alcatel-Lucent SROS series systems." ::= { tmnxVRtrGroups 93 } END