-- *********************************************************************
-- CISCO-FIREPOWER-AP-DIAG-MIB.my
-- 
-- MIB representation of the Cisco Firepower
-- DIAG management information model package
-- 
-- Created August 2017 by Charles Bullis
-- 
-- Copyright (c) 2005-2017 Cisco Systems, Inc. All rights reserved.
-- 
-- *********************************************************************

CISCO-FIREPOWER-AP-DIAG-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    Gauge32,
    TimeTicks,
    Counter64,
    Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,
    RowPointer,
    DateAndTime,
    DisplayString,
    MacAddress,
    TimeInterval,
    TimeStamp,
    TruthValue
        FROM SNMPv2-TC
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    InetAddressIPv4,
    InetAddressIPv6
        FROM INET-ADDRESS-MIB
    ciscoMgmt
        FROM CISCO-SMI
    CiscoNetworkAddress,
    Unsigned64,
    CiscoInetAddressMask,
    CiscoAlarmSeverity,
    TimeIntervalSec
        FROM CISCO-TC
    ciscoFirepowerApMIBObjects,
    CfprApManagedObjectId,
    CfprApManagedObjectDn
        FROM CISCO-FIREPOWER-AP-MIB
    CfprApDiagAdminState,
    CfprApDiagBladeTestType,
    CfprApDiagFailureAction,
    CfprApDiagNetworkTestType,
    CfprApDiagSrvCtrlType,
    CfprApDiagStatus,
    CfprApDiagStatusIssues,
    CfprApDiagSuccessAction,
    CfprApDiagTestOrder,
    CfprApNetworkSwitchId,
    CfprApPolicyPolicyOwner
        FROM CISCO-FIREPOWER-AP-TC-MIB;

cfprApDiagObjects MODULE-IDENTITY
    LAST-UPDATED    "201708230000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
        "Cisco Systems
        Customer Service
        
        Postal: 170 W Tasman Drive
        San Jose, CA  95134
        USA
        
        Tel: +1 800 553-NETS
        
        E-mail: firepower-mibs@cisco.com"
    DESCRIPTION
        "MIB representation of the Cisco Firepower
        DIAG management information model package"
    ::= { ciscoFirepowerApMIBObjects 16 }

cfprApDiagBladeTestTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApDiagBladeTestEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest managed object table"
    ::= { cfprApDiagObjects 1 }

cfprApDiagBladeTestEntry OBJECT-TYPE
    SYNTAX           CfprApDiagBladeTestEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApDiagBladeTestTable table."
    INDEX { cfprApDiagBladeTestInstanceId }
    ::= { cfprApDiagBladeTestTable 1 }

CfprApDiagBladeTestEntry ::= SEQUENCE {
    cfprApDiagBladeTestInstanceId                                    CfprApManagedObjectId,
    cfprApDiagBladeTestDn                                            CfprApManagedObjectDn,
    cfprApDiagBladeTestRn                                            SnmpAdminString,
    cfprApDiagBladeTestLength                                        Gauge32,
    cfprApDiagBladeTestOrder                                         CfprApDiagTestOrder,
    cfprApDiagBladeTestType                                          CfprApDiagBladeTestType
}

cfprApDiagBladeTestInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApDiagBladeTestEntry 1 }

cfprApDiagBladeTestDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest:dn managed object property"
    ::= { cfprApDiagBladeTestEntry 2 }

cfprApDiagBladeTestRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest:rn managed object property"
    ::= { cfprApDiagBladeTestEntry 3 }

cfprApDiagBladeTestLength OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest:length managed object property"
    ::= { cfprApDiagBladeTestEntry 4 }

cfprApDiagBladeTestOrder OBJECT-TYPE
    SYNTAX       CfprApDiagTestOrder
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest:order managed object property"
    ::= { cfprApDiagBladeTestEntry 5 }

cfprApDiagBladeTestType OBJECT-TYPE
    SYNTAX       CfprApDiagBladeTestType
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:BladeTest:type managed object property"
    ::= { cfprApDiagBladeTestEntry 6 }

cfprApDiagNetworkTestTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApDiagNetworkTestEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest managed object table"
    ::= { cfprApDiagObjects 2 }

cfprApDiagNetworkTestEntry OBJECT-TYPE
    SYNTAX           CfprApDiagNetworkTestEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApDiagNetworkTestTable table."
    INDEX { cfprApDiagNetworkTestInstanceId }
    ::= { cfprApDiagNetworkTestTable 1 }

CfprApDiagNetworkTestEntry ::= SEQUENCE {
    cfprApDiagNetworkTestInstanceId                                  CfprApManagedObjectId,
    cfprApDiagNetworkTestDn                                          CfprApManagedObjectDn,
    cfprApDiagNetworkTestRn                                          SnmpAdminString,
    cfprApDiagNetworkTestLength                                      Gauge32,
    cfprApDiagNetworkTestOrder                                       CfprApDiagTestOrder,
    cfprApDiagNetworkTestSwitchId                                    CfprApNetworkSwitchId,
    cfprApDiagNetworkTestType                                        CfprApDiagNetworkTestType
}

cfprApDiagNetworkTestInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApDiagNetworkTestEntry 1 }

cfprApDiagNetworkTestDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:dn managed object property"
    ::= { cfprApDiagNetworkTestEntry 2 }

cfprApDiagNetworkTestRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:rn managed object property"
    ::= { cfprApDiagNetworkTestEntry 3 }

cfprApDiagNetworkTestLength OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:length managed object property"
    ::= { cfprApDiagNetworkTestEntry 4 }

cfprApDiagNetworkTestOrder OBJECT-TYPE
    SYNTAX       CfprApDiagTestOrder
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:order managed object property"
    ::= { cfprApDiagNetworkTestEntry 5 }

cfprApDiagNetworkTestSwitchId OBJECT-TYPE
    SYNTAX       CfprApNetworkSwitchId
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:switchId managed
        object property"
    ::= { cfprApDiagNetworkTestEntry 6 }

cfprApDiagNetworkTestType OBJECT-TYPE
    SYNTAX       CfprApDiagNetworkTestType
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:NetworkTest:type managed object property"
    ::= { cfprApDiagNetworkTestEntry 7 }

cfprApDiagRsltTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApDiagRsltEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:Rslt managed object table"
    ::= { cfprApDiagObjects 3 }

cfprApDiagRsltEntry OBJECT-TYPE
    SYNTAX           CfprApDiagRsltEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApDiagRsltTable table."
    INDEX { cfprApDiagRsltInstanceId }
    ::= { cfprApDiagRsltTable 1 }

CfprApDiagRsltEntry ::= SEQUENCE {
    cfprApDiagRsltInstanceId                                         CfprApManagedObjectId,
    cfprApDiagRsltDn                                                 CfprApManagedObjectDn,
    cfprApDiagRsltRn                                                 SnmpAdminString,
    cfprApDiagRsltDescr                                              SnmpAdminString,
    cfprApDiagRsltEndTs                                              DateAndTime,
    cfprApDiagRsltId                                                 Gauge32,
    cfprApDiagRsltResult                                             Gauge32,
    cfprApDiagRsltRsltStatus                                         CfprApDiagStatus,
    cfprApDiagRsltStartTs                                            DateAndTime
}

cfprApDiagRsltInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApDiagRsltEntry 1 }

cfprApDiagRsltDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:dn managed object property"
    ::= { cfprApDiagRsltEntry 2 }

cfprApDiagRsltRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:rn managed object property"
    ::= { cfprApDiagRsltEntry 3 }

cfprApDiagRsltDescr OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:descr managed object property"
    ::= { cfprApDiagRsltEntry 4 }

cfprApDiagRsltEndTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:endTs managed object property"
    ::= { cfprApDiagRsltEntry 5 }

cfprApDiagRsltId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:id managed object property"
    ::= { cfprApDiagRsltEntry 6 }

cfprApDiagRsltResult OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:result managed object property"
    ::= { cfprApDiagRsltEntry 7 }

cfprApDiagRsltRsltStatus OBJECT-TYPE
    SYNTAX       CfprApDiagStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:rsltStatus managed object property"
    ::= { cfprApDiagRsltEntry 8 }

cfprApDiagRsltStartTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:Rslt:startTs managed object property"
    ::= { cfprApDiagRsltEntry 9 }

cfprApDiagRunPolicyTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApDiagRunPolicyEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy managed object table"
    ::= { cfprApDiagObjects 4 }

cfprApDiagRunPolicyEntry OBJECT-TYPE
    SYNTAX           CfprApDiagRunPolicyEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApDiagRunPolicyTable table."
    INDEX { cfprApDiagRunPolicyInstanceId }
    ::= { cfprApDiagRunPolicyTable 1 }

CfprApDiagRunPolicyEntry ::= SEQUENCE {
    cfprApDiagRunPolicyInstanceId                                    CfprApManagedObjectId,
    cfprApDiagRunPolicyDn                                            CfprApManagedObjectDn,
    cfprApDiagRunPolicyRn                                            SnmpAdminString,
    cfprApDiagRunPolicyDescr                                         SnmpAdminString,
    cfprApDiagRunPolicyFailureAction                                 CfprApDiagFailureAction,
    cfprApDiagRunPolicyIntId                                         SnmpAdminString,
    cfprApDiagRunPolicyName                                          SnmpAdminString,
    cfprApDiagRunPolicyPolicyLevel                                   Gauge32,
    cfprApDiagRunPolicyPolicyOwner                                   CfprApPolicyPolicyOwner,
    cfprApDiagRunPolicySuccessAction                                 CfprApDiagSuccessAction
}

cfprApDiagRunPolicyInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApDiagRunPolicyEntry 1 }

cfprApDiagRunPolicyDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:dn managed object property"
    ::= { cfprApDiagRunPolicyEntry 2 }

cfprApDiagRunPolicyRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:rn managed object property"
    ::= { cfprApDiagRunPolicyEntry 3 }

cfprApDiagRunPolicyDescr OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:descr managed object property"
    ::= { cfprApDiagRunPolicyEntry 4 }

cfprApDiagRunPolicyFailureAction OBJECT-TYPE
    SYNTAX       CfprApDiagFailureAction
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:failureAction managed
        object property"
    ::= { cfprApDiagRunPolicyEntry 5 }

cfprApDiagRunPolicyIntId OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:intId managed object property"
    ::= { cfprApDiagRunPolicyEntry 6 }

cfprApDiagRunPolicyName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:name managed object property"
    ::= { cfprApDiagRunPolicyEntry 7 }

cfprApDiagRunPolicyPolicyLevel OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:policyLevel managed
        object property"
    ::= { cfprApDiagRunPolicyEntry 8 }

cfprApDiagRunPolicyPolicyOwner OBJECT-TYPE
    SYNTAX       CfprApPolicyPolicyOwner
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:policyOwner managed
        object property"
    ::= { cfprApDiagRunPolicyEntry 9 }

cfprApDiagRunPolicySuccessAction OBJECT-TYPE
    SYNTAX       CfprApDiagSuccessAction
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:RunPolicy:successAction managed
        object property"
    ::= { cfprApDiagRunPolicyEntry 10 }

cfprApDiagSrvCapProviderTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApDiagSrvCapProviderEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider managed object table"
    ::= { cfprApDiagObjects 5 }

cfprApDiagSrvCapProviderEntry OBJECT-TYPE
    SYNTAX           CfprApDiagSrvCapProviderEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApDiagSrvCapProviderTable table."
    INDEX { cfprApDiagSrvCapProviderInstanceId }
    ::= { cfprApDiagSrvCapProviderTable 1 }

CfprApDiagSrvCapProviderEntry ::= SEQUENCE {
    cfprApDiagSrvCapProviderInstanceId                               CfprApManagedObjectId,
    cfprApDiagSrvCapProviderDn                                       CfprApManagedObjectDn,
    cfprApDiagSrvCapProviderRn                                       SnmpAdminString,
    cfprApDiagSrvCapProviderDeleted                                  TruthValue,
    cfprApDiagSrvCapProviderDeprecated                               TruthValue,
    cfprApDiagSrvCapProviderElementLoadFailures                      Gauge32,
    cfprApDiagSrvCapProviderElementsLoaded                           Gauge32,
    cfprApDiagSrvCapProviderGencount                                 Gauge32,
    cfprApDiagSrvCapProviderLoadErrors                               Gauge32,
    cfprApDiagSrvCapProviderLoadWarnings                             Gauge32,
    cfprApDiagSrvCapProviderMgmtPlaneVer                             SnmpAdminString,
    cfprApDiagSrvCapProviderModel                                    SnmpAdminString,
    cfprApDiagSrvCapProviderPromCardType                             Gauge32,
    cfprApDiagSrvCapProviderRevision                                 SnmpAdminString,
    cfprApDiagSrvCapProviderVendor                                   SnmpAdminString
}

cfprApDiagSrvCapProviderInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApDiagSrvCapProviderEntry 1 }

cfprApDiagSrvCapProviderDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:dn managed object property"
    ::= { cfprApDiagSrvCapProviderEntry 2 }

cfprApDiagSrvCapProviderRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:rn managed object property"
    ::= { cfprApDiagSrvCapProviderEntry 3 }

cfprApDiagSrvCapProviderDeleted OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:deleted managed
        object property"
    ::= { cfprApDiagSrvCapProviderEntry 4 }

cfprApDiagSrvCapProviderDeprecated OBJECT-TYPE
    SYNTAX       TruthValue
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:deprecated
        managed object property"
    ::= { cfprApDiagSrvCapProviderEntry 5 }

cfprApDiagSrvCapProviderElementLoadFailures OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:elementLoadFailures
        managed object property"
    ::= { cfprApDiagSrvCapProviderEntry 6 }

cfprApDiagSrvCapProviderElementsLoaded OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:elementsLoaded
        managed object property"
    ::= { cfprApDiagSrvCapProviderEntry 7 }

cfprApDiagSrvCapProviderGencount OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:gencount managed
        object property"
    ::= { cfprApDiagSrvCapProviderEntry 8 }

cfprApDiagSrvCapProviderLoadErrors OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:loadErrors
        managed object property"
    ::= { cfprApDiagSrvCapProviderEntry 9 }

cfprApDiagSrvCapProviderLoadWarnings OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:loadWarnings
        managed object property"
    ::= { cfprApDiagSrvCapProviderEntry 10 }

cfprApDiagSrvCapProviderMgmtPlaneVer OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:mgmtPlaneVer
        managed object property"
    ::= { cfprApDiagSrvCapProviderEntry 11 }

cfprApDiagSrvCapProviderModel OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:model managed
        object property"
    ::= { cfprApDiagSrvCapProviderEntry 12 }

cfprApDiagSrvCapProviderPromCardType OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:promCardType
        managed object property"
    ::= { cfprApDiagSrvCapProviderEntry 13 }

cfprApDiagSrvCapProviderRevision OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:revision managed
        object property"
    ::= { cfprApDiagSrvCapProviderEntry 14 }

cfprApDiagSrvCapProviderVendor OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCapProvider:vendor managed
        object property"
    ::= { cfprApDiagSrvCapProviderEntry 15 }

cfprApDiagSrvCtrlTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApDiagSrvCtrlEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl managed object table"
    ::= { cfprApDiagObjects 6 }

cfprApDiagSrvCtrlEntry OBJECT-TYPE
    SYNTAX           CfprApDiagSrvCtrlEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApDiagSrvCtrlTable table."
    INDEX { cfprApDiagSrvCtrlInstanceId }
    ::= { cfprApDiagSrvCtrlTable 1 }

CfprApDiagSrvCtrlEntry ::= SEQUENCE {
    cfprApDiagSrvCtrlInstanceId                                      CfprApManagedObjectId,
    cfprApDiagSrvCtrlDn                                              CfprApManagedObjectDn,
    cfprApDiagSrvCtrlRn                                              SnmpAdminString,
    cfprApDiagSrvCtrlAdminState                                      CfprApDiagAdminState,
    cfprApDiagSrvCtrlEndTs                                           DateAndTime,
    cfprApDiagSrvCtrlEndTsM                                          Unsigned64,
    cfprApDiagSrvCtrlErrorDescr                                      SnmpAdminString,
    cfprApDiagSrvCtrlImgLoc                                          SnmpAdminString,
    cfprApDiagSrvCtrlImgName                                         SnmpAdminString,
    cfprApDiagSrvCtrlOperQualifier                                   CfprApDiagStatusIssues,
    cfprApDiagSrvCtrlOperState                                       CfprApDiagStatus,
    cfprApDiagSrvCtrlRunPolicyName                                   SnmpAdminString,
    cfprApDiagSrvCtrlStartTs                                         DateAndTime,
    cfprApDiagSrvCtrlStartTsM                                        Unsigned64,
    cfprApDiagSrvCtrlType                                            CfprApDiagSrvCtrlType
}

cfprApDiagSrvCtrlInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApDiagSrvCtrlEntry 1 }

cfprApDiagSrvCtrlDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:dn managed object property"
    ::= { cfprApDiagSrvCtrlEntry 2 }

cfprApDiagSrvCtrlRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:rn managed object property"
    ::= { cfprApDiagSrvCtrlEntry 3 }

cfprApDiagSrvCtrlAdminState OBJECT-TYPE
    SYNTAX       CfprApDiagAdminState
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:adminState managed object property"
    ::= { cfprApDiagSrvCtrlEntry 4 }

cfprApDiagSrvCtrlEndTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:endTs managed object property"
    ::= { cfprApDiagSrvCtrlEntry 5 }

cfprApDiagSrvCtrlEndTsM OBJECT-TYPE
    SYNTAX       Unsigned64
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:endTsM managed object property"
    ::= { cfprApDiagSrvCtrlEntry 6 }

cfprApDiagSrvCtrlErrorDescr OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:errorDescr managed object property"
    ::= { cfprApDiagSrvCtrlEntry 7 }

cfprApDiagSrvCtrlImgLoc OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:imgLoc managed object property"
    ::= { cfprApDiagSrvCtrlEntry 8 }

cfprApDiagSrvCtrlImgName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:imgName managed object property"
    ::= { cfprApDiagSrvCtrlEntry 9 }

cfprApDiagSrvCtrlOperQualifier OBJECT-TYPE
    SYNTAX       CfprApDiagStatusIssues
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:operQualifier managed
        object property"
    ::= { cfprApDiagSrvCtrlEntry 10 }

cfprApDiagSrvCtrlOperState OBJECT-TYPE
    SYNTAX       CfprApDiagStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:operState managed object property"
    ::= { cfprApDiagSrvCtrlEntry 11 }

cfprApDiagSrvCtrlRunPolicyName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:runPolicyName managed
        object property"
    ::= { cfprApDiagSrvCtrlEntry 12 }

cfprApDiagSrvCtrlStartTs OBJECT-TYPE
    SYNTAX       DateAndTime
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:startTs managed object property"
    ::= { cfprApDiagSrvCtrlEntry 13 }

cfprApDiagSrvCtrlStartTsM OBJECT-TYPE
    SYNTAX       Unsigned64
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:startTsM managed object property"
    ::= { cfprApDiagSrvCtrlEntry 14 }

cfprApDiagSrvCtrlType OBJECT-TYPE
    SYNTAX       CfprApDiagSrvCtrlType
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower diag:SrvCtrl:type managed object property"
    ::= { cfprApDiagSrvCtrlEntry 15 }

END