-- *********************************************************************
-- CISCO-FIREPOWER-AP-PCI-MIB.my
-- 
-- MIB representation of the Cisco Firepower
-- PCI management information model package
-- 
-- Created August 2017 by Charles Bullis
-- 
-- Copyright (c) 2005-2017 Cisco Systems, Inc. All rights reserved.
-- 
-- *********************************************************************

CISCO-FIREPOWER-AP-PCI-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    Gauge32,
    TimeTicks,
    Counter64,
    Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,
    RowPointer,
    DateAndTime,
    DisplayString,
    MacAddress,
    TimeInterval,
    TimeStamp,
    TruthValue
        FROM SNMPv2-TC
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    InetAddressIPv4,
    InetAddressIPv6
        FROM INET-ADDRESS-MIB
    ciscoMgmt
        FROM CISCO-SMI
    CiscoNetworkAddress,
    Unsigned64,
    CiscoInetAddressMask,
    CiscoAlarmSeverity,
    TimeIntervalSec
        FROM CISCO-TC
    ciscoFirepowerApMIBObjects,
    CfprApManagedObjectId,
    CfprApManagedObjectDn
        FROM CISCO-FIREPOWER-AP-MIB
    CfprApEquipmentDiscoveryState,
    CfprApEquipmentOperability,
    CfprApEquipmentPowerState,
    CfprApEquipmentPresence,
    CfprApEquipmentSensorThresholdStatus,
    CfprApPciEquipSlotId
        FROM CISCO-FIREPOWER-AP-TC-MIB;

cfprApPciObjects MODULE-IDENTITY
    LAST-UPDATED    "201708230000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
        "Cisco Systems
        Customer Service
        
        Postal: 170 W Tasman Drive
        San Jose, CA  95134
        USA
        
        Tel: +1 800 553-NETS
        
        E-mail: firepower-mibs@cisco.com"
    DESCRIPTION
        "MIB representation of the Cisco Firepower
        PCI management information model package"
    ::= { ciscoFirepowerApMIBObjects 60 }

cfprApPciEquipSlotTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApPciEquipSlotEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot managed object table"
    ::= { cfprApPciObjects 1 }

cfprApPciEquipSlotEntry OBJECT-TYPE
    SYNTAX           CfprApPciEquipSlotEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApPciEquipSlotTable table."
    INDEX { cfprApPciEquipSlotInstanceId }
    ::= { cfprApPciEquipSlotTable 1 }

CfprApPciEquipSlotEntry ::= SEQUENCE {
    cfprApPciEquipSlotInstanceId                                     CfprApManagedObjectId,
    cfprApPciEquipSlotDn                                             CfprApManagedObjectDn,
    cfprApPciEquipSlotRn                                             SnmpAdminString,
    cfprApPciEquipSlotControllerReported                             SnmpAdminString,
    cfprApPciEquipSlotDiscoveryState                                 CfprApEquipmentDiscoveryState,
    cfprApPciEquipSlotFltAggr                                        Unsigned64,
    cfprApPciEquipSlotHostReported                                   SnmpAdminString,
    cfprApPciEquipSlotId                                             CfprApPciEquipSlotId,
    cfprApPciEquipSlotMacLeft                                        MacAddress,
    cfprApPciEquipSlotMacRight                                       MacAddress,
    cfprApPciEquipSlotModel                                          SnmpAdminString,
    cfprApPciEquipSlotRevision                                       SnmpAdminString,
    cfprApPciEquipSlotSerial                                         SnmpAdminString,
    cfprApPciEquipSlotSmbiosId                                       Gauge32,
    cfprApPciEquipSlotVendor                                         SnmpAdminString
}

cfprApPciEquipSlotInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApPciEquipSlotEntry 1 }

cfprApPciEquipSlotDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:dn managed object property"
    ::= { cfprApPciEquipSlotEntry 2 }

cfprApPciEquipSlotRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:rn managed object property"
    ::= { cfprApPciEquipSlotEntry 3 }

cfprApPciEquipSlotControllerReported OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:controllerReported
        managed object property"
    ::= { cfprApPciEquipSlotEntry 4 }

cfprApPciEquipSlotDiscoveryState OBJECT-TYPE
    SYNTAX       CfprApEquipmentDiscoveryState
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:discoveryState managed
        object property"
    ::= { cfprApPciEquipSlotEntry 5 }

cfprApPciEquipSlotFltAggr OBJECT-TYPE
    SYNTAX       Unsigned64
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:fltAggr managed object property"
    ::= { cfprApPciEquipSlotEntry 6 }

cfprApPciEquipSlotHostReported OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:hostReported managed
        object property"
    ::= { cfprApPciEquipSlotEntry 7 }

cfprApPciEquipSlotId OBJECT-TYPE
    SYNTAX       CfprApPciEquipSlotId
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:id managed object property"
    ::= { cfprApPciEquipSlotEntry 8 }

cfprApPciEquipSlotMacLeft OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:macLeft managed object property"
    ::= { cfprApPciEquipSlotEntry 9 }

cfprApPciEquipSlotMacRight OBJECT-TYPE
    SYNTAX       MacAddress
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:macRight managed object property"
    ::= { cfprApPciEquipSlotEntry 10 }

cfprApPciEquipSlotModel OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:model managed object property"
    ::= { cfprApPciEquipSlotEntry 11 }

cfprApPciEquipSlotRevision OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:revision managed object property"
    ::= { cfprApPciEquipSlotEntry 12 }

cfprApPciEquipSlotSerial OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:serial managed object property"
    ::= { cfprApPciEquipSlotEntry 13 }

cfprApPciEquipSlotSmbiosId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:smbiosId managed object property"
    ::= { cfprApPciEquipSlotEntry 14 }

cfprApPciEquipSlotVendor OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:EquipSlot:vendor managed object property"
    ::= { cfprApPciEquipSlotEntry 15 }

cfprApPciUnitTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApPciUnitEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower pci:Unit managed object table"
    ::= { cfprApPciObjects 2 }

cfprApPciUnitEntry OBJECT-TYPE
    SYNTAX           CfprApPciUnitEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApPciUnitTable table."
    INDEX { cfprApPciUnitInstanceId }
    ::= { cfprApPciUnitTable 1 }

CfprApPciUnitEntry ::= SEQUENCE {
    cfprApPciUnitInstanceId                                          CfprApManagedObjectId,
    cfprApPciUnitDn                                                  CfprApManagedObjectDn,
    cfprApPciUnitRn                                                  SnmpAdminString,
    cfprApPciUnitId                                                  Gauge32,
    cfprApPciUnitLocationDn                                          SnmpAdminString,
    cfprApPciUnitModel                                               SnmpAdminString,
    cfprApPciUnitOperQualifierReason                                 SnmpAdminString,
    cfprApPciUnitOperState                                           CfprApEquipmentOperability,
    cfprApPciUnitOperability                                         CfprApEquipmentOperability,
    cfprApPciUnitPciAddr                                             SnmpAdminString,
    cfprApPciUnitPciSlot                                             SnmpAdminString,
    cfprApPciUnitPerf                                                CfprApEquipmentSensorThresholdStatus,
    cfprApPciUnitPower                                               CfprApEquipmentPowerState,
    cfprApPciUnitPresence                                            CfprApEquipmentPresence,
    cfprApPciUnitRevision                                            SnmpAdminString,
    cfprApPciUnitSerial                                              SnmpAdminString,
    cfprApPciUnitThermal                                             CfprApEquipmentSensorThresholdStatus,
    cfprApPciUnitVendor                                              SnmpAdminString,
    cfprApPciUnitVoltage                                             CfprApEquipmentSensorThresholdStatus
}

cfprApPciUnitInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApPciUnitEntry 1 }

cfprApPciUnitDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:dn managed object property"
    ::= { cfprApPciUnitEntry 2 }

cfprApPciUnitRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:rn managed object property"
    ::= { cfprApPciUnitEntry 3 }

cfprApPciUnitId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:id managed object property"
    ::= { cfprApPciUnitEntry 4 }

cfprApPciUnitLocationDn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:locationDn managed object property"
    ::= { cfprApPciUnitEntry 5 }

cfprApPciUnitModel OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:model managed object property"
    ::= { cfprApPciUnitEntry 6 }

cfprApPciUnitOperQualifierReason OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:operQualifierReason managed
        object property"
    ::= { cfprApPciUnitEntry 7 }

cfprApPciUnitOperState OBJECT-TYPE
    SYNTAX       CfprApEquipmentOperability
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:operState managed object property"
    ::= { cfprApPciUnitEntry 8 }

cfprApPciUnitOperability OBJECT-TYPE
    SYNTAX       CfprApEquipmentOperability
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:operability managed object property"
    ::= { cfprApPciUnitEntry 9 }

cfprApPciUnitPciAddr OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:pciAddr managed object property"
    ::= { cfprApPciUnitEntry 10 }

cfprApPciUnitPciSlot OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:pciSlot managed object property"
    ::= { cfprApPciUnitEntry 11 }

cfprApPciUnitPerf OBJECT-TYPE
    SYNTAX       CfprApEquipmentSensorThresholdStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:perf managed object property"
    ::= { cfprApPciUnitEntry 12 }

cfprApPciUnitPower OBJECT-TYPE
    SYNTAX       CfprApEquipmentPowerState
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:power managed object property"
    ::= { cfprApPciUnitEntry 13 }

cfprApPciUnitPresence OBJECT-TYPE
    SYNTAX       CfprApEquipmentPresence
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:presence managed object property"
    ::= { cfprApPciUnitEntry 14 }

cfprApPciUnitRevision OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:revision managed object property"
    ::= { cfprApPciUnitEntry 15 }

cfprApPciUnitSerial OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:serial managed object property"
    ::= { cfprApPciUnitEntry 16 }

cfprApPciUnitThermal OBJECT-TYPE
    SYNTAX       CfprApEquipmentSensorThresholdStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:thermal managed object property"
    ::= { cfprApPciUnitEntry 17 }

cfprApPciUnitVendor OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:vendor managed object property"
    ::= { cfprApPciUnitEntry 18 }

cfprApPciUnitVoltage OBJECT-TYPE
    SYNTAX       CfprApEquipmentSensorThresholdStatus
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower pci:Unit:voltage managed object property"
    ::= { cfprApPciUnitEntry 19 }

END