-- *********************************************************************
-- CISCO-FIREPOWER-AP-PROC-MIB.my
-- 
-- MIB representation of the Cisco Firepower
-- PROC management information model package
-- 
-- Created August 2017 by Charles Bullis
-- 
-- Copyright (c) 2005-2017 Cisco Systems, Inc. All rights reserved.
-- 
-- *********************************************************************

CISCO-FIREPOWER-AP-PROC-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY,
    OBJECT-TYPE,
    Counter32,
    Gauge32,
    TimeTicks,
    Counter64,
    Unsigned32
        FROM SNMPv2-SMI
    TEXTUAL-CONVENTION,
    RowPointer,
    DateAndTime,
    DisplayString,
    MacAddress,
    TimeInterval,
    TimeStamp,
    TruthValue
        FROM SNMPv2-TC
    SnmpAdminString
        FROM SNMP-FRAMEWORK-MIB
    InetAddressIPv4,
    InetAddressIPv6
        FROM INET-ADDRESS-MIB
    ciscoMgmt
        FROM CISCO-SMI
    CiscoNetworkAddress,
    Unsigned64,
    CiscoInetAddressMask,
    CiscoAlarmSeverity,
    TimeIntervalSec
        FROM CISCO-TC
    ciscoFirepowerApMIBObjects,
    CfprApManagedObjectId,
    CfprApManagedObjectDn
        FROM CISCO-FIREPOWER-AP-MIB
    CfprApProcStatAdminState
        FROM CISCO-FIREPOWER-AP-TC-MIB;

cfprApProcObjects MODULE-IDENTITY
    LAST-UPDATED    "201708230000Z"
    ORGANIZATION    "Cisco Systems Inc."
    CONTACT-INFO
        "Cisco Systems
        Customer Service
        
        Postal: 170 W Tasman Drive
        San Jose, CA  95134
        USA
        
        Tel: +1 800 553-NETS
        
        E-mail: firepower-mibs@cisco.com"
    DESCRIPTION
        "MIB representation of the Cisco Firepower
        PROC management information model package"
    ::= { ciscoFirepowerApMIBObjects 65 }

cfprApProcDoerTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApProcDoerEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower proc:Doer managed object table"
    ::= { cfprApProcObjects 1 }

cfprApProcDoerEntry OBJECT-TYPE
    SYNTAX           CfprApProcDoerEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApProcDoerTable table."
    INDEX { cfprApProcDoerInstanceId }
    ::= { cfprApProcDoerTable 1 }

CfprApProcDoerEntry ::= SEQUENCE {
    cfprApProcDoerInstanceId                                         CfprApManagedObjectId,
    cfprApProcDoerDn                                                 CfprApManagedObjectDn,
    cfprApProcDoerRn                                                 SnmpAdminString,
    cfprApProcDoerId                                                 Gauge32,
    cfprApProcDoerName                                               SnmpAdminString
}

cfprApProcDoerInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApProcDoerEntry 1 }

cfprApProcDoerDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Doer:dn managed object property"
    ::= { cfprApProcDoerEntry 2 }

cfprApProcDoerRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Doer:rn managed object property"
    ::= { cfprApProcDoerEntry 3 }

cfprApProcDoerId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Doer:id managed object property"
    ::= { cfprApProcDoerEntry 4 }

cfprApProcDoerName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Doer:name managed object property"
    ::= { cfprApProcDoerEntry 5 }

cfprApProcManagerTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApProcManagerEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower proc:Manager managed object table"
    ::= { cfprApProcObjects 2 }

cfprApProcManagerEntry OBJECT-TYPE
    SYNTAX           CfprApProcManagerEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApProcManagerTable table."
    INDEX { cfprApProcManagerInstanceId }
    ::= { cfprApProcManagerTable 1 }

CfprApProcManagerEntry ::= SEQUENCE {
    cfprApProcManagerInstanceId                                      CfprApManagedObjectId,
    cfprApProcManagerDn                                              CfprApManagedObjectDn,
    cfprApProcManagerRn                                              SnmpAdminString
}

cfprApProcManagerInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApProcManagerEntry 1 }

cfprApProcManagerDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Manager:dn managed object property"
    ::= { cfprApProcManagerEntry 2 }

cfprApProcManagerRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Manager:rn managed object property"
    ::= { cfprApProcManagerEntry 3 }

cfprApProcPrtTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApProcPrtEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower proc:Prt managed object table"
    ::= { cfprApProcObjects 3 }

cfprApProcPrtEntry OBJECT-TYPE
    SYNTAX           CfprApProcPrtEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApProcPrtTable table."
    INDEX { cfprApProcPrtInstanceId }
    ::= { cfprApProcPrtTable 1 }

CfprApProcPrtEntry ::= SEQUENCE {
    cfprApProcPrtInstanceId                                          CfprApManagedObjectId,
    cfprApProcPrtDn                                                  CfprApManagedObjectDn,
    cfprApProcPrtRn                                                  SnmpAdminString,
    cfprApProcPrtId                                                  Gauge32,
    cfprApProcPrtName                                                SnmpAdminString
}

cfprApProcPrtInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApProcPrtEntry 1 }

cfprApProcPrtDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Prt:dn managed object property"
    ::= { cfprApProcPrtEntry 2 }

cfprApProcPrtRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Prt:rn managed object property"
    ::= { cfprApProcPrtEntry 3 }

cfprApProcPrtId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Prt:id managed object property"
    ::= { cfprApProcPrtEntry 4 }

cfprApProcPrtName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Prt:name managed object property"
    ::= { cfprApProcPrtEntry 5 }

cfprApProcPrtCountsTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApProcPrtCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower proc:PrtCounts managed object table"
    ::= { cfprApProcObjects 4 }

cfprApProcPrtCountsEntry OBJECT-TYPE
    SYNTAX           CfprApProcPrtCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApProcPrtCountsTable table."
    INDEX { cfprApProcPrtCountsInstanceId }
    ::= { cfprApProcPrtCountsTable 1 }

CfprApProcPrtCountsEntry ::= SEQUENCE {
    cfprApProcPrtCountsInstanceId                                    CfprApManagedObjectId,
    cfprApProcPrtCountsDn                                            CfprApManagedObjectDn,
    cfprApProcPrtCountsRn                                            SnmpAdminString,
    cfprApProcPrtCountsCachenospc                                    Gauge32,
    cfprApProcPrtCountsDbtxs                                         Gauge32,
    cfprApProcPrtCountsLargetxs                                      Gauge32,
    cfprApProcPrtCountsPersistTime                                   Unsigned64,
    cfprApProcPrtCountsTotal                                         Gauge32
}

cfprApProcPrtCountsInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApProcPrtCountsEntry 1 }

cfprApProcPrtCountsDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:PrtCounts:dn managed object property"
    ::= { cfprApProcPrtCountsEntry 2 }

cfprApProcPrtCountsRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:PrtCounts:rn managed object property"
    ::= { cfprApProcPrtCountsEntry 3 }

cfprApProcPrtCountsCachenospc OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:PrtCounts:cachenospc managed
        object property"
    ::= { cfprApProcPrtCountsEntry 4 }

cfprApProcPrtCountsDbtxs OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:PrtCounts:dbtxs managed object property"
    ::= { cfprApProcPrtCountsEntry 5 }

cfprApProcPrtCountsLargetxs OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:PrtCounts:largetxs managed object property"
    ::= { cfprApProcPrtCountsEntry 6 }

cfprApProcPrtCountsPersistTime OBJECT-TYPE
    SYNTAX       Unsigned64
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:PrtCounts:persistTime managed
        object property"
    ::= { cfprApProcPrtCountsEntry 7 }

cfprApProcPrtCountsTotal OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:PrtCounts:total managed object property"
    ::= { cfprApProcPrtCountsEntry 8 }

cfprApProcStimulusCountsTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApProcStimulusCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower proc:StimulusCounts managed object table"
    ::= { cfprApProcObjects 5 }

cfprApProcStimulusCountsEntry OBJECT-TYPE
    SYNTAX           CfprApProcStimulusCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApProcStimulusCountsTable table."
    INDEX { cfprApProcStimulusCountsInstanceId }
    ::= { cfprApProcStimulusCountsTable 1 }

CfprApProcStimulusCountsEntry ::= SEQUENCE {
    cfprApProcStimulusCountsInstanceId                               CfprApManagedObjectId,
    cfprApProcStimulusCountsDn                                       CfprApManagedObjectDn,
    cfprApProcStimulusCountsRn                                       SnmpAdminString,
    cfprApProcStimulusCountsAdminState                               CfprApProcStatAdminState,
    cfprApProcStimulusCountsBulked                                   Gauge32,
    cfprApProcStimulusCountsFailed                                   Gauge32,
    cfprApProcStimulusCountsRetried                                  Gauge32,
    cfprApProcStimulusCountsSingleton                                Gauge32,
    cfprApProcStimulusCountsSuccessfull                              Gauge32,
    cfprApProcStimulusCountsTotal                                    Gauge32
}

cfprApProcStimulusCountsInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApProcStimulusCountsEntry 1 }

cfprApProcStimulusCountsDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:StimulusCounts:dn managed object property"
    ::= { cfprApProcStimulusCountsEntry 2 }

cfprApProcStimulusCountsRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:StimulusCounts:rn managed object property"
    ::= { cfprApProcStimulusCountsEntry 3 }

cfprApProcStimulusCountsAdminState OBJECT-TYPE
    SYNTAX       CfprApProcStatAdminState
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:StimulusCounts:adminState
        managed object property"
    ::= { cfprApProcStimulusCountsEntry 4 }

cfprApProcStimulusCountsBulked OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:StimulusCounts:bulked managed
        object property"
    ::= { cfprApProcStimulusCountsEntry 5 }

cfprApProcStimulusCountsFailed OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:StimulusCounts:failed managed
        object property"
    ::= { cfprApProcStimulusCountsEntry 6 }

cfprApProcStimulusCountsRetried OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:StimulusCounts:retried managed
        object property"
    ::= { cfprApProcStimulusCountsEntry 7 }

cfprApProcStimulusCountsSingleton OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:StimulusCounts:singleton
        managed object property"
    ::= { cfprApProcStimulusCountsEntry 8 }

cfprApProcStimulusCountsSuccessfull OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:StimulusCounts:successfull
        managed object property"
    ::= { cfprApProcStimulusCountsEntry 9 }

cfprApProcStimulusCountsTotal OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:StimulusCounts:total managed
        object property"
    ::= { cfprApProcStimulusCountsEntry 10 }

cfprApProcSvcTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApProcSvcEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower proc:Svc managed object table"
    ::= { cfprApProcObjects 6 }

cfprApProcSvcEntry OBJECT-TYPE
    SYNTAX           CfprApProcSvcEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApProcSvcTable table."
    INDEX { cfprApProcSvcInstanceId }
    ::= { cfprApProcSvcTable 1 }

CfprApProcSvcEntry ::= SEQUENCE {
    cfprApProcSvcInstanceId                                          CfprApManagedObjectId,
    cfprApProcSvcDn                                                  CfprApManagedObjectDn,
    cfprApProcSvcRn                                                  SnmpAdminString,
    cfprApProcSvcId                                                  Gauge32,
    cfprApProcSvcName                                                SnmpAdminString
}

cfprApProcSvcInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApProcSvcEntry 1 }

cfprApProcSvcDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Svc:dn managed object property"
    ::= { cfprApProcSvcEntry 2 }

cfprApProcSvcRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Svc:rn managed object property"
    ::= { cfprApProcSvcEntry 3 }

cfprApProcSvcId OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Svc:id managed object property"
    ::= { cfprApProcSvcEntry 4 }

cfprApProcSvcName OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:Svc:name managed object property"
    ::= { cfprApProcSvcEntry 5 }

cfprApProcTxCountsTable OBJECT-TYPE
    SYNTAX           SEQUENCE OF CfprApProcTxCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Cisco Firepower proc:TxCounts managed object table"
    ::= { cfprApProcObjects 7 }

cfprApProcTxCountsEntry OBJECT-TYPE
    SYNTAX           CfprApProcTxCountsEntry
    MAX-ACCESS       not-accessible
    STATUS           current
    DESCRIPTION
        "Entry for the cfprApProcTxCountsTable table."
    INDEX { cfprApProcTxCountsInstanceId }
    ::= { cfprApProcTxCountsTable 1 }

CfprApProcTxCountsEntry ::= SEQUENCE {
    cfprApProcTxCountsInstanceId                                     CfprApManagedObjectId,
    cfprApProcTxCountsDn                                             CfprApManagedObjectDn,
    cfprApProcTxCountsRn                                             SnmpAdminString,
    cfprApProcTxCountsAdminState                                     CfprApProcStatAdminState,
    cfprApProcTxCountsBulked                                         Gauge32,
    cfprApProcTxCountsFailed                                         Gauge32,
    cfprApProcTxCountsRetried                                        Gauge32,
    cfprApProcTxCountsSingleton                                      Gauge32,
    cfprApProcTxCountsSuccessfull                                    Gauge32,
    cfprApProcTxCountsTotal                                          Gauge32
}

cfprApProcTxCountsInstanceId OBJECT-TYPE
    SYNTAX       CfprApManagedObjectId
    MAX-ACCESS   not-accessible
    STATUS       current
    DESCRIPTION
        "Instance identifier of the managed object."
    ::= { cfprApProcTxCountsEntry 1 }

cfprApProcTxCountsDn OBJECT-TYPE
    SYNTAX       CfprApManagedObjectDn
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:TxCounts:dn managed object property"
    ::= { cfprApProcTxCountsEntry 2 }

cfprApProcTxCountsRn OBJECT-TYPE
    SYNTAX       SnmpAdminString
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:TxCounts:rn managed object property"
    ::= { cfprApProcTxCountsEntry 3 }

cfprApProcTxCountsAdminState OBJECT-TYPE
    SYNTAX       CfprApProcStatAdminState
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:TxCounts:adminState managed object property"
    ::= { cfprApProcTxCountsEntry 4 }

cfprApProcTxCountsBulked OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:TxCounts:bulked managed object property"
    ::= { cfprApProcTxCountsEntry 5 }

cfprApProcTxCountsFailed OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:TxCounts:failed managed object property"
    ::= { cfprApProcTxCountsEntry 6 }

cfprApProcTxCountsRetried OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:TxCounts:retried managed object property"
    ::= { cfprApProcTxCountsEntry 7 }

cfprApProcTxCountsSingleton OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:TxCounts:singleton managed object property"
    ::= { cfprApProcTxCountsEntry 8 }

cfprApProcTxCountsSuccessfull OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:TxCounts:successfull managed
        object property"
    ::= { cfprApProcTxCountsEntry 9 }

cfprApProcTxCountsTotal OBJECT-TYPE
    SYNTAX       Gauge32
    MAX-ACCESS   read-only
    STATUS       current
    DESCRIPTION
        "Cisco Firepower proc:TxCounts:total managed object property"
    ::= { cfprApProcTxCountsEntry 10 }

END