-- Copyright (C) 2016 by HUAWEI TECHNOLOGIES. All rights reserved. -- Description: HUAWEI Private Extended Interface MIB -- Reference: -- Version: V2.14 -- History: -- Version: V2.0 -- History: -- Yang Jishang,2009-05-04, Add one table for Mdn compliance. -- ================================================================== -- ================================================================== -- -- Varibles and types be imported -- -- ================================================================== HUAWEI-LLDP-MIB DEFINITIONS ::= BEGIN IMPORTS TruthValue, TEXTUAL-CONVENTION, DisplayString, MacAddress FROM SNMPv2-TC MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP FROM SNMPv2-CONF MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, OBJECT-IDENTITY, Unsigned32, NOTIFICATION-TYPE FROM SNMPv2-SMI InterfaceIndex FROM IF-MIB lldpPortConfigPortNum,lldpLocSysCapSupported,lldpLocSysCapEnabled, LldpPortNumber,LldpPortId,lldpRemEntry FROM LLDP-MIB hwDatacomm FROM HUAWEI-MIB; hwLldpMIB MODULE-IDENTITY LAST-UPDATED "201612240000Z" ORGANIZATION "Huawei Technologies Co.,Ltd." CONTACT-INFO "Huawei Industrial Base Bantian, Longgang Shenzhen 518129 People's Republic of China Website: http://www.huawei.com Email: support@huawei.com " DESCRIPTION "This file is an extension of LLDP-MIB. It provides such functions of globally enabling or disabling the LLDP protocol, enabling the global alarm, clearing statistics on ports and configuring network management IP addresses and some alarms." REVISION "201612240000Z" DESCRIPTION "add hwLldpRemNetworkIdTable" REVISION "201605160000Z" DESCRIPTION "add trap hwLldpInterfaceRemTablesChange" REVISION "201503311730Z" DESCRIPTION "add trap hwLldpRateExcessive" REVISION "201503101558Z" DESCRIPTION "modify hwLldpCounterReset" ::= { hwDatacomm 134 } -- Textual Convention EnabledStatus ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "A simple status value for the object." SYNTAX INTEGER { enabled(1), disabled(2) } -- ============================================================================ -- Node definitions -- ============================================================================ -- 1.3.6.1.4.1.2011.5.25.134 hwLldpObjects OBJECT IDENTIFIER ::= { hwLldpMIB 1} hwLldpTraps OBJECT IDENTIFIER ::= { hwLldpMIB 2 } hwLldpConformance OBJECT IDENTIFIER ::= { hwLldpMIB 3 } -- ============================================================================ -- -- ======================= Objects definitions================================= -- -- ============================================================================ hwLldpConfiguration OBJECT IDENTIFIER ::= { hwLldpObjects 1} hwLldpRemoteSystemData OBJECT IDENTIFIER ::= { hwLldpObjects 2} hwLldpInterfaceRemData OBJECT IDENTIFIER ::= { hwLldpObjects 3} hwLldpTrapObjects OBJECT IDENTIFIER ::= { hwLldpObjects 51 } hwLldpEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Globally enable or disable the LLDP configuration. If the hwLldpEnable is 1, LLDP is enabled. If the hwLldpEnable is 2, LLDP is disabled. By default, LLDP is disabled." ::= { hwLldpConfiguration 1 } hwLldpLocManIPAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS current DESCRIPTION "Specifies the management IP address of the local device. The management IP address is carried in the management address TLV of LLDP packet and is used to identify NM devices in network management. The management IP address configured here must be a valid one and must be an IP address in the address chain. If the IP address is not valid or is not configured, the management IP address will be chosen from default IP addressees of the system. The sequence of address searching is: loopback interface, management network interface, VLANIF port and IP address chain (The smallest IP is chosen). If the default IP is not found, the bridge MAC of the system is used." ::= { hwLldpConfiguration 2 } hwLldpCounterReset OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Clears the statistics of neighbours received and sent for trap informations." ::= { hwLldpConfiguration 3 } hwLldpNotificationEnable OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The global alarming that is used to control alarms on all ports. If it is 1, the global alarming is enabled. If it is 2, the global alarming is disabled. By default, the global alarming is enabled." ::= { hwLldpConfiguration 4 } hwLldpPortConfigTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLldpPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LLDP port congfiguration table." ::= { hwLldpConfiguration 5 } hwLldpPortConfigEntry OBJECT-TYPE SYNTAX HwLldpPortConfigEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the LLDP port congfiguration table." INDEX{ lldpPortConfigPortNum} ::= { hwLldpPortConfigTable 1} HwLldpPortConfigEntry ::= SEQUENCE { hwLldpPortConfigIfIndex InterfaceIndex, hwLldpPortConfigCounterReset EnabledStatus } hwLldpPortConfigIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS read-only STATUS current DESCRIPTION "Port index." ::= {hwLldpPortConfigEntry 11} hwLldpPortConfigCounterReset OBJECT-TYPE SYNTAX EnabledStatus MAX-ACCESS read-write STATUS current DESCRIPTION "Clears the statistics of packets received and sent on the current port." ::= {hwLldpPortConfigEntry 12} hwLldpRemProtoTypeTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLldpRemProtoTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LLDP remote neighbour protocol version table." ::= { hwLldpRemoteSystemData 1 } hwLldpRemProtoTypeEntry OBJECT-TYPE SYNTAX HwLldpRemProtoTypeEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the LLDP remote neighbour protocol version table." INDEX { lldpPortConfigPortNum } ::= { hwLldpRemProtoTypeTable 1} HwLldpRemProtoTypeEntry ::= SEQUENCE { hwLldpRemProtoType INTEGER } hwLldpRemProtoType OBJECT-TYPE SYNTAX INTEGER { lldp(1), mdn(2), unknown(255) } MAX-ACCESS read-only STATUS current DESCRIPTION "Protocol type of the remote neighbour." ::= {hwLldpRemProtoTypeEntry 1} hwLldpMdnRemTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLldpMdnRemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "MacAddress discovery neighbour remote table." ::= { hwLldpRemoteSystemData 2 } hwLldpMdnRemEntry OBJECT-TYPE SYNTAX HwLldpMdnRemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the MacAddress discovery neighbour remote table." INDEX { hwLldpMdnRemLocalPortNum, hwLldpMdnRemIndex } ::= { hwLldpMdnRemTable 1} HwLldpMdnRemEntry ::= SEQUENCE { hwLldpMdnRemLocalPortNum LldpPortNumber, hwLldpMdnRemIndex Integer32, hwLldpMdnRemLocalPortId LldpPortId, hwLldpMdnRemMacAddr MacAddress } hwLldpMdnRemLocalPortNum OBJECT-TYPE SYNTAX LldpPortNumber MAX-ACCESS not-accessible STATUS current DESCRIPTION "The index value used to identify the local port associated with this entry." ::= {hwLldpMdnRemEntry 1} hwLldpMdnRemIndex OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS not-accessible STATUS current DESCRIPTION "This object represents an arbitrary local integer value used to identify a particular connection instance, unique only for the indicated remote system." ::= {hwLldpMdnRemEntry 2} hwLldpMdnRemLocalPortId OBJECT-TYPE SYNTAX LldpPortId MAX-ACCESS read-only STATUS current DESCRIPTION "The string value used to identify the port component associated with a given port in the local system." ::= {hwLldpMdnRemEntry 3} hwLldpMdnRemMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MacAddress of LLDP MacAddress discovery neighbor." ::= {hwLldpMdnRemEntry 8} hwLldpRemNetworkIdTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLldpRemNetworkIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "LLDP remote neighbour network id table." ::= { hwLldpRemoteSystemData 3 } hwLldpRemNetworkIdEntry OBJECT-TYPE SYNTAX HwLldpRemNetworkIdEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the LLDP remote neighbour network id table." AUGMENTS { lldpRemEntry } ::= { hwLldpRemNetworkIdTable 1} HwLldpRemNetworkIdEntry ::= SEQUENCE { hwLldpRemNetworkId OCTET STRING } hwLldpRemNetworkId OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-only STATUS current DESCRIPTION "Network id of the remote neighbour." ::= {hwLldpRemNetworkIdEntry 1} hwLldpInterfaceRemTable OBJECT-TYPE SYNTAX SEQUENCE OF HwLldpInterfaceRemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LLDP remote table." ::= { hwLldpInterfaceRemData 1 } hwLldpInterfaceRemEntry OBJECT-TYPE SYNTAX HwLldpInterfaceRemEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Entries of the LLDP remote table." INDEX { hwLldpRemTablesChangeIfIndex } ::= { hwLldpInterfaceRemTable 1} HwLldpInterfaceRemEntry ::= SEQUENCE { hwLldpRemTablesChangeIfIndex InterfaceIndex, hwLldpRemTablesChangeType INTEGER, hwLldpInterfaceRemAdds Integer32, hwLldpInterfaceRemDeletes Integer32 } hwLldpRemTablesChangeIfIndex OBJECT-TYPE SYNTAX InterfaceIndex MAX-ACCESS not-accessible STATUS current DESCRIPTION "The LLDP neighbors of this interface was changed." ::= { hwLldpInterfaceRemEntry 1 } hwLldpRemTablesChangeType OBJECT-TYPE SYNTAX INTEGER { added(1), deleted(2) } MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The change type of LLDP remote tables." ::= { hwLldpInterfaceRemEntry 2 } hwLldpInterfaceRemAdds OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The number of LLDP neighbors inserted." ::= { hwLldpInterfaceRemEntry 3 } hwLldpInterfaceRemDeletes OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "The number of LLDP neighbors deleted." ::= { hwLldpInterfaceRemEntry 4 } -- define trap VB hwLldpTrapIfName OBJECT-TYPE SYNTAX OCTET STRING (SIZE (0..64)) MAX-ACCESS accessible-for-notify STATUS current DESCRIPTION "Lldp trap message interface name." ::= { hwLldpTrapObjects 1 } hwLldpEnabled NOTIFICATION-TYPE STATUS current DESCRIPTION "Notify the NMS that the LLDP is globally enabled. This alarm is not restricted by the alarm delay." ::= { hwLldpTraps 1} hwLldpDisabled NOTIFICATION-TYPE STATUS current DESCRIPTION "Notify the NMS that the LLDP is globally disabled. This alarm is not restricted by the alarm delay." ::= { hwLldpTraps 2} hwLldpLocSysCapSupportedChange NOTIFICATION-TYPE OBJECTS {lldpLocSysCapSupported} STATUS current DESCRIPTION "Alarm on the change of capabilities supported of a local device." ::= { hwLldpTraps 3} hwLldpLocSysCapEnabledChange NOTIFICATION-TYPE OBJECTS {lldpLocSysCapEnabled} STATUS current DESCRIPTION "Alarm on the change of capabilities enabled of a local device." ::= { hwLldpTraps 4} hwLldpLocManIPAddrChange NOTIFICATION-TYPE OBJECTS {hwLldpLocManIPAddr} STATUS current DESCRIPTION "Alarm on the change of management IP address of a local device." ::= { hwLldpTraps 5} hwLldpMdnRemTablesChange NOTIFICATION-TYPE STATUS current DESCRIPTION "Notify the NMS that the MacAddress discovery neighbor is changed." ::= { hwLldpTraps 6} hwLldpRateExcessive NOTIFICATION-TYPE OBJECTS { hwLldpTrapIfName } STATUS current DESCRIPTION "Notify the NMS that the received PDU rate has exceeded the threshold." ::= { hwLldpTraps 7} hwLldpInterfaceRemTablesChange NOTIFICATION-TYPE OBJECTS { hwLldpRemTablesChangeType, hwLldpInterfaceRemAdds, hwLldpInterfaceRemDeletes } STATUS current DESCRIPTION "Notify the NMS that the LLDP neighbor information of the interface was changed." ::= { hwLldpTraps 8} -- -- *********************************************************** -- -- HAUWEILLDPMIBCONFORMANCE -- -- *********************************************************** -- hwLldpCompliances OBJECT IDENTIFIER ::= { hwLldpConformance 1 } hwLldpGroups OBJECT IDENTIFIER ::= { hwLldpConformance 2 } -- compliance statements lldpCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for SNMP entities which implement the HUAWEI-LLDP-MIB." MODULE -- this module MANDATORY-GROUPS { hwLldpConfigGroup, hwLldpStatsGroup, hwLldpPortGroup, hwLldpTrapGroup } ::= { hwLldpCompliances 1 } -- MIB groupings hwLldpConfigGroup OBJECT-GROUP OBJECTS { hwLldpEnable, hwLldpLocManIPAddr, hwLldpNotificationEnable } STATUS current DESCRIPTION "The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP." ::= { hwLldpGroups 1 } hwLldpStatsGroup OBJECT-GROUP OBJECTS { hwLldpCounterReset, hwLldpPortConfigCounterReset } STATUS current DESCRIPTION "The collection of objects which are used to represent LLDP statistics. This group is mandatory for agents which implement the LLDP and have the capability of receiving and transmitting LLDP frames." ::= { hwLldpGroups 2 } hwLldpPortGroup OBJECT-GROUP OBJECTS { hwLldpPortConfigIfIndex , hwLldpRemProtoType } STATUS current DESCRIPTION "The collection of objects indicate index of port." ::= { hwLldpGroups 3 } hwLldpTrapGroup NOTIFICATION-GROUP NOTIFICATIONS { hwLldpEnabled, hwLldpDisabled, hwLldpLocSysCapSupportedChange, hwLldpLocSysCapEnabledChange, hwLldpLocManIPAddrChange, hwLldpMdnRemTablesChange, hwLldpRateExcessive, hwLldpInterfaceRemTablesChange } STATUS current DESCRIPTION "The collection of notifications used to indicate HUAWEI-LLDP-MIB data consistency and general status information. This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames." ::= { hwLldpGroups 4 } hwLldpMdnRemGroup OBJECT-GROUP OBJECTS { hwLldpMdnRemLocalPortId, hwLldpMdnRemMacAddr } STATUS current DESCRIPTION "The collection of objects which are used to represent LLDP MacAddress discovery neighbor remote systems information. The objects represent the information associated with the basic TLV set. Please note that even the agent doesn't implement some of the optional TLVs, it shall recognize all the optional TLV information that the remote system may advertise." ::= { hwLldpGroups 5 } hwLldpTrapObjectsGroup OBJECT-GROUP OBJECTS { hwLldpTrapIfName } STATUS current DESCRIPTION "The collection of objects used as trap parameters." ::= { hwLldpGroups 6 } hwLldpInterfaceRemGroup OBJECT-GROUP OBJECTS { hwLldpRemTablesChangeType, hwLldpInterfaceRemAdds, hwLldpInterfaceRemDeletes } STATUS current DESCRIPTION "The LLDP remote table." ::= { hwLldpGroups 7 } hwLldpRemNetworkIdGroup OBJECT-GROUP OBJECTS { hwLldpRemNetworkId } STATUS current DESCRIPTION "The LLDP remote networkId table." ::= { hwLldpGroups 8 } END